Low voltage relay problem

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Low voltage relay problem

Postby Magpie » Sat Mar 23, 2013 4:05 pm

Can somebody help with the following problem?

I need to switch on a 12 volt light when voltage on the control circuit drops to zero. The control circuit is 1.7 volt and 3.8 ma when OK, when there is a fault it drops to zero.

I assume that a relay can be used but I can not find one that will stay open at such a low voltage/amps.
Top
manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Low voltage relay problem

Postby manga_blue » Sat Mar 23, 2013 7:18 pm

RS sells them down to 2.2V.

http://australia.rs-online.com/web/c/re ... ng-relays/
’95 NA8
Top
Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Low voltage relay problem

Postby Magpie » Sat Mar 23, 2013 8:18 pm

Thanks.
Top
Post Reply

Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 154 guests