What gasket silicone do your use?

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

What gasket silicone do your use?

Postby gslender » Wed Feb 20, 2013 6:08 pm

Hi,

I went down to buy some gasket silicone sealant, and boy I was overwhelmed with the different types - what type does one use when rebuilding the engine, or do you get a different type for every part and area?

I ended up getting some Loctite Hi-Temp RTV Silicone Red / Sensor-Safe - this seemed suitable for almost all areas and probably for places I wont be using. I've used a bit and it goes hard and rubbery like normal silicone and I can only assume it will withstand high temps of the engine bay as its rated to just above 300*

But honestly I wasn't really sure and nor was the sales staff who was recommending anything as being suitable... really???

G
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

Re: What gasket silicone do your use?

Postby wozzah1975 » Wed Feb 20, 2013 6:16 pm

gslender wrote:Hi,

I went down to buy some gasket silicone sealant, and boy I was overwhelmed with the different types - what type does one use when rebuilding the engine, or do you get a different type for every part and area?

I ended up getting some Loctite Hi-Temp RTV Silicone Red / Sensor-Safe - this seemed suitable for almost all areas and probably for places I wont be using. I've used a bit and it goes hard and rubbery like normal silicone and I can only assume it will withstand high temps of the engine bay as its rated to just above 300*

But honestly I wasn't really sure and nor was the sales staff who was recommending anything as being suitable... really???

G


threebond, the grey stuff. It is what is used as OE on most jap stuff

Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292

toppertee
Racing Driver
Posts: 699
Joined: Mon Jul 11, 2011 4:16 pm
Vehicle: NA6
Location: Brisbane

Re: What gasket silicone do your use?

Postby toppertee » Wed Feb 20, 2013 9:31 pm

gslender wrote:Hi,

I went down to buy some gasket silicone sealant, and boy I was overwhelmed with the different types - what type does one use when rebuilding the engine, or do you get a different type for every part and area?

I ended up getting some Loctite Hi-Temp RTV Silicone Red / Sensor-Safe - this seemed suitable for almost all areas and probably for places I wont be using. I've used a bit and it goes hard and rubbery like normal silicone and I can only assume it will withstand high temps of the engine bay as its rated to just above 300*

But honestly I wasn't really sure and nor was the sales staff who was recommending anything as being suitable... really???

G


It's what I used, Glen said it was cool and the gang!

User avatar
mrpham
Forum sponsor
Posts: 856
Joined: Tue Sep 20, 2011 8:42 pm
Vehicle: NA6
Location: Brisbane
Contact:

Re: What gasket silicone do your use?

Postby mrpham » Wed Feb 20, 2013 9:46 pm

I also use Threebond :D (the 1211 and it's white).
Current Forum Specials!

Frame Rail Braces - http://goo.gl/xJtRTs
COPs Bracket - http://goo.gl/sxJWhF

Build Thread - http://goo.gl/L3ZuKU

toppertee
Racing Driver
Posts: 699
Joined: Mon Jul 11, 2011 4:16 pm
Vehicle: NA6
Location: Brisbane

Re: What gasket silicone do your use?

Postby toppertee » Wed Feb 20, 2013 10:17 pm

mrpham wrote:I also use Threebond :D (the 1211 and it's white).

White is no good, everyone knows red makes it go faster :mrgreen:


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 12 guests