Lap times
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
Spence forgot the Torsen diff also, in the interests of full disclosure
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
motomenace wrote:Ill give u the slicks off my car that i used. Still good enough for another track day or so.
Still have plenty of grip and come up to temp well!!. Only thing is u need 8inch wheels as they are 220/225 profile.
But u can have them as i have 2 newer sets just sitting that will go off if they sit too long.
I watched your video chris and theres still alot of time in your car to find, Think by running slicks youl have the confidence to push harder. The other thing is you rev your car in 3rd when the 1.8 looses out around 7k. Ratios appear to be the same, just i dont rev mine all the way to 7500. Besides that u drive really smooth , Think you'd be a good co-driver for the 300races next year!!!
I think 1.10's is all a standard motor can muster around there!! A 6 speed might let it see high 9's.
As long as we get faster each weekend we go out were doing ok ;)
I'll need rims for them as I only have 1 set haha
I still find myself braking too early which is a shocking habbit and one I am trying to break! Even at the start of the races I back off well before you to keep some distance where I look at it now and think to myself WTF am I doing!
so where do you rev yours in 3rd to? did you have any in car footage? would be great to compare to.
Im up for a 300 race next year with ya!
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
Hi,
In 3rd i rev to about 7 after turn 2 shift to fourth before the left hander up the hill, (dont lift) then back to 3rd for the top section, 4th just before the right handed sweeper then 2nd for fish hook, 3rd then 4th before the corner on the back straight. Thats it. Basically i shift 4th and it seems to pull alot more than holding 3rd. 2nd however gets the 7500 limit.
Yeah, with slicks u always need a back up plan for rain lol. 2 sets mandatory.
No incar unfortunately, left it at home. I needed it too for the stewards in race one of tt after my little "incident". Next time ill make sure i have it
In 3rd i rev to about 7 after turn 2 shift to fourth before the left hander up the hill, (dont lift) then back to 3rd for the top section, 4th just before the right handed sweeper then 2nd for fish hook, 3rd then 4th before the corner on the back straight. Thats it. Basically i shift 4th and it seems to pull alot more than holding 3rd. 2nd however gets the 7500 limit.
Yeah, with slicks u always need a back up plan for rain lol. 2 sets mandatory.
No incar unfortunately, left it at home. I needed it too for the stewards in race one of tt after my little "incident". Next time ill make sure i have it
-
- Driver
- Posts: 85
- Joined: Wed Sep 07, 2011 8:37 am
- Vehicle: NA8
Re: Lap times
1st track day ever
Managed a 1:15.97 at wakefield on really worn Bridgestone RE-11's - Pretty stoked with that result
Jordan
Managed a 1:15.97 at wakefield on really worn Bridgestone RE-11's - Pretty stoked with that result
Jordan
-
- Driver
- Posts: 57
- Joined: Sun Aug 12, 2012 5:44 pm
- Vehicle: NB8B
- Location: Sydney..most of the time
Re: Lap times
49.86 @ Marulan for my second time out in the NB. Standard apart from a seat and RE002's on 16x7 wheels. Would really like to be into the low 49s before I change anything else out. For what it's worth I got my fastest times when my 002's were at 35psi hot.
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: Lap times
yods wrote:49.86 @ Marulan for my second time out in the NB. Standard apart from a seat and RE002's on 16x7 wheels. Would really like to be into the low 49s before I change anything else out. For what it's worth I got my fastest times when my 002's were at 35psi hot.
If you'd like a full day of coaching from experienced supersprinters and racers, the MX-5 Club of NSW is holding a driver training day at Marulan on 10th March. Cost is only $90 for members / $105 for non-members. Highly recommended!
http://www.mx5.com.au/nsw/motorsport.htm
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
-
- Driver
- Posts: 57
- Joined: Sun Aug 12, 2012 5:44 pm
- Vehicle: NB8B
- Location: Sydney..most of the time
Re: Lap times
Would love to but will be in germany - are there any others scheduled for later in the year?
What tyres did you do the 48.91 in?
What tyres did you do the 48.91 in?
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
Does any one know the outright lap record for an mx5 around wakefield.
In the 300 qualifying my cousin done a 1.04.2 in an nb turbo mx5. With 120l of fuel on board.
In the 300 qualifying my cousin done a 1.04.2 in an nb turbo mx5. With 120l of fuel on board.
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
1.12.0 at Wakefield today. Nb8b just had some lovin' from Deckspeed, collected it yesterday. At the FOSC practice day (official qualifying tomorrow morning, have to hope the tys hold it together for a few laps).
No, no turbo, cams, itb's, just the usual starting point mods. Will write up on my garage chat after the weekend.
Still feel like there is plenty in it, not used to different gear change points and tyres will be thrown out after this weekend.
No, no turbo, cams, itb's, just the usual starting point mods. Will write up on my garage chat after the weekend.
Still feel like there is plenty in it, not used to different gear change points and tyres will be thrown out after this weekend.
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
Stout effort Craig!!!
I really need to get my bum in gear and spend cash on my car. Sick of being slow!!!
Matt, I think matilda has done a 1.03
I really need to get my bum in gear and spend cash on my car. Sick of being slow!!!
Matt, I think matilda has done a 1.03
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
You will still have me for breakfast in the mra, consistency wasn't my strong point Spent too much time looking in my mirrors.
-
- Driver
- Posts: 80
- Joined: Mon Jun 13, 2011 12:26 pm
Re: Lap times
Daniel Deckers borrowed my NC today and did a 1.06.9 on old slicks in the TT race.
I think this is a track record for a NC.
I think this is a track record for a NC.
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
Looked like the car went great all day too Michael. There were a lot of other casualties for various reasons.
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
thats hooting!
Im now down to a 1.12.3 in my car.
Im now down to a 1.12.3 in my car.
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
Return to “Laptimes and Dyno Results”
Who is online
Users browsing this forum: No registered users and 17 guests