Hey all,
I'm currently replacing all nine water hoses on my SE and I have one left over!
Either I can't see the forest for the trees (and it's sitting there looking at me), or it's buried so deep it will be a proper bugger to replace.
I'd be ever so grateful if someone may be able to tell me where it lives.
Many thanks in advance...
Help wanted to locate mystery SE water hose
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
- Tony
- Racing Driver
- Posts: 510
- Joined: Sun Apr 11, 2010 6:52 pm
- Vehicle: NC
- Location: Bathurst, NSW
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Help wanted to locate mystery SE water hose
Guessing - under dash, on the firewall, could it be for the coolant overflow bottle?
-
- Racing Driver
- Posts: 1064
- Joined: Wed Jun 24, 2009 5:49 pm
- Vehicle: NC
- Location: Southie...NOT from " the Shire " :/.
Re: Help wanted to locate mystery SE water hose
Google is my friend
http://www.jimellismazdaparts.com/showA ... ct=1836372
http://www.jimellismazdaparts.com/showA ... ct=1836372
Rob
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
- timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
Re: Help wanted to locate mystery SE water hose
I don't think you could replace it without pulling the turbo, it would at least be a huge pain. It connects to the hard water line that goes from the water pump inlet to the heater. On the SE only, it also has a barb that splits off to this rubber hose and is covered by some heat reflecting cloth wrap. I hope that makes sense.
- Tony
- Racing Driver
- Posts: 510
- Joined: Sun Apr 11, 2010 6:52 pm
- Vehicle: NC
- Location: Bathurst, NSW
Re: Help wanted to locate mystery SE water hose
Thanks for the help gents.
I had a good look around on the interweb, but never even considered looking in an online parts listing!
So, for those who find this thread in a future search, the hose appears to feed cooling water to/from the turbo and is found wrapped in a heatproof braid under the heat shield.
I looked at it for a fair while and figured I'd need to pull the exhaust manifold as a minimum; with a distinct possibility that the turbo may have to be removed too. I reckon the Mazda engineers must have started with this hose and then built the car around it!
Needless to say, I hope the hose doesn't fail before I next have the motor out or the turbo off. At least I'll have a spare on hand!
Thanks again...
I had a good look around on the interweb, but never even considered looking in an online parts listing!
So, for those who find this thread in a future search, the hose appears to feed cooling water to/from the turbo and is found wrapped in a heatproof braid under the heat shield.
I looked at it for a fair while and figured I'd need to pull the exhaust manifold as a minimum; with a distinct possibility that the turbo may have to be removed too. I reckon the Mazda engineers must have started with this hose and then built the car around it!
Needless to say, I hope the hose doesn't fail before I next have the motor out or the turbo off. At least I'll have a spare on hand!
Thanks again...
'09 NC2
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: Google [Bot] and 150 guests