Hi
Just quoted $1000 to change cam belt, water pump, seals etc. seems steep to me.
(MX5 Plus).
Any suggestions for a good mechanic to do it cheaper in Brisbane Northside?
Maybe a good mobile guy as I could strip things down before he arrives?
Cheers
Cam belt change Brisbane
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Driver
- Posts: 39
- Joined: Wed Apr 15, 2009 8:41 pm
- Vehicle: ND - 1.5 GT
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Cam belt change Brisbane
MX5 Plus do quality work and (at least to me) are worth it.
What do you think it is worth?
What do you think it is worth?
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Cam belt change Brisbane
Go to a specialist, you'll pay that. Go to a local mechanic, you pay 75% of that. If you don't know of no one else that can do the work, then paying the extra is worth it.
Personally I think it is a little high. But then again you are paying for their experience/knowledge. not that it is a big deal on a water pump and timing belt change. Hopefully includes froont crank seal?
Personally I think it is a little high. But then again you are paying for their experience/knowledge. not that it is a big deal on a water pump and timing belt change. Hopefully includes froont crank seal?
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Re: Cam belt change Brisbane
Depending on the quality of parts and what is being specifically replaced parts would be $600, and labour the balance.
You should ask for a specific breakdown of that quote and compare part prices with a few online UK or USA shops to get a feel for how reasonable they are being. Labour should be around 4 hours and $100 per hour for experienced and busy mechanics is about right.
If you did it yourself (I did) it only cost me about $400 not inc labour.
G
You should ask for a specific breakdown of that quote and compare part prices with a few online UK or USA shops to get a feel for how reasonable they are being. Labour should be around 4 hours and $100 per hour for experienced and busy mechanics is about right.
If you did it yourself (I did) it only cost me about $400 not inc labour.
G
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
-
- Fast Driver
- Posts: 156
- Joined: Mon Apr 23, 2012 9:04 am
- Vehicle: NA6
- Location: Sydney
Re: Cam belt change Brisbane
I just finished mine today. $250 for all the parts delivered from mx5parts uk (pump, seals etc) and free labour (myself - although time is money ).
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: Cam belt change Brisbane
Of course if the job gets done incorrectly, your crankshaft nose could get ruined in time and then you'd need a new crankshaft - $$$$. If I couldn't do it myself, I'd go to MX-5 Plus.
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Cam belt change Brisbane
it's not that far off the mark. Get some alternative quotes. I would not think about doing half the job yourself. A reputable mechanic / business will warrant their work. You can also ask MX Plus to give you some more info eg what make of water pump and timing belt they use.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Cam belt change Brisbane
Having a replacement engine installed sourced from an astina from a wreckers shouldn't cost more than 1000.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Cam belt change Brisbane
Basho kindly posted his detailed receipt after he had his done - the thread also provides some other insights: viewtopic.php?f=18&t=51227
-
- Driver
- Posts: 39
- Joined: Wed Apr 15, 2009 8:41 pm
- Vehicle: ND - 1.5 GT
Re: Cam belt change Brisbane
Cheers all. The MX5 parts UK looks the goods for quality parts without the excessive prices.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 52 guests