Cam belt change Brisbane

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Divo
Driver
Posts: 39
Joined: Wed Apr 15, 2009 8:41 pm
Vehicle: ND - 1.5 GT

Cam belt change Brisbane

Postby Divo » Tue Jan 15, 2013 9:34 pm

Hi

Just quoted $1000 to change cam belt, water pump, seals etc. seems steep to me.
(MX5 Plus).
Any suggestions for a good mechanic to do it cheaper in Brisbane Northside?
Maybe a good mobile guy as I could strip things down before he arrives?

Cheers

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Cam belt change Brisbane

Postby Magpie » Tue Jan 15, 2013 9:38 pm

MX5 Plus do quality work and (at least to me) are worth it.

What do you think it is worth?

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Cam belt change Brisbane

Postby project.r.racing » Tue Jan 15, 2013 10:00 pm

Go to a specialist, you'll pay that. Go to a local mechanic, you pay 75% of that. If you don't know of no one else that can do the work, then paying the extra is worth it.

Personally I think it is a little high. But then again you are paying for their experience/knowledge. not that it is a big deal on a water pump and timing belt change. Hopefully includes froont crank seal?

User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

Re: Cam belt change Brisbane

Postby gslender » Tue Jan 15, 2013 10:08 pm

Depending on the quality of parts and what is being specifically replaced parts would be $600, and labour the balance.

You should ask for a specific breakdown of that quote and compare part prices with a few online UK or USA shops to get a feel for how reasonable they are being. Labour should be around 4 hours and $100 per hour for experienced and busy mechanics is about right.

If you did it yourself (I did) it only cost me about $400 not inc labour.

G
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"

brendanstacey
Fast Driver
Posts: 156
Joined: Mon Apr 23, 2012 9:04 am
Vehicle: NA6
Location: Sydney

Re: Cam belt change Brisbane

Postby brendanstacey » Tue Jan 15, 2013 11:40 pm

I just finished mine today. $250 for all the parts delivered from mx5parts uk (pump, seals etc) and free labour (myself - although time is money :)).

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Cam belt change Brisbane

Postby JBT » Wed Jan 16, 2013 5:39 am

Of course if the job gets done incorrectly, your crankshaft nose could get ruined in time and then you'd need a new crankshaft - $$$$. If I couldn't do it myself, I'd go to MX-5 Plus.
Image

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Cam belt change Brisbane

Postby Mr Morlock » Wed Jan 16, 2013 9:38 am

it's not that far off the mark. Get some alternative quotes. I would not think about doing half the job yourself. A reputable mechanic / business will warrant their work. You can also ask MX Plus to give you some more info eg what make of water pump and timing belt they use.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Cam belt change Brisbane

Postby NitroDann » Wed Jan 16, 2013 10:43 am

Having a replacement engine installed sourced from an astina from a wreckers shouldn't cost more than 1000.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Cam belt change Brisbane

Postby 93_Clubman » Wed Jan 16, 2013 11:25 am

Basho kindly posted his detailed receipt after he had his done - the thread also provides some other insights: viewtopic.php?f=18&t=51227

Divo
Driver
Posts: 39
Joined: Wed Apr 15, 2009 8:41 pm
Vehicle: ND - 1.5 GT

Re: Cam belt change Brisbane

Postby Divo » Thu Jan 17, 2013 8:43 pm

Cheers all. The MX5 parts UK looks the goods for quality parts without the excessive prices.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 55 guests