Busted plug lead

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Busted plug lead

Postby Jeo » Sun Dec 30, 2012 3:04 pm

Washed the engine bay today in my NA and she's inevitably running on three cylinders. Fired up the compressor and pulled the plug leads to blow out any water, then discovered this...

Image

Image

The bottom part is stuck on the plug itself. Anyone got any great ideas on how to remove it beyond a pair of really long nose pliers?

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: Busted plug lead

Postby myredmx5 » Sun Dec 30, 2012 6:27 pm

Maybe the tube spanner in the tool kit will fit over the spark plug.

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Busted plug lead

Postby project.r.racing » Sun Dec 30, 2012 7:02 pm

dont use pliers. the plastic is brittle and hence the original cracking. any more force and you have little pieces everywhere inside you spark plug hole.

as above, try and remove the spark plug with all the plastic still attached.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Busted plug lead

Postby Mr Morlock » Mon Dec 31, 2012 2:40 pm

a useful tool are forceps - long thin nose. the other half is probably still intact. If its not assume you could blow the debris out. You can also get a variety of points and hooks etc from any of the auto places. personally I would remove the debris before taking out the plug

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: Busted plug lead

Postby Jeo » Mon Dec 31, 2012 3:53 pm

Can't get the socket over the plug. The plastic bit is stuck over it.

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Busted plug lead

Postby bruce » Mon Dec 31, 2012 4:28 pm

Squirt WD40 into hole. Allow it to soak and soften/loosen rubber. Get a torch and wire and fish the rubber (bits) out. Blast out dry and clean before removing spark plug. Check top of plug.

ralt
Fast Driver
Posts: 423
Joined: Thu May 19, 2011 11:10 am
Vehicle: ND - 2
Location: brisbane

Re: Busted plug lead

Postby ralt » Mon Dec 31, 2012 5:41 pm

Hi.
Once you have removed the plastic ( you may need to obtain a set of long nose pliers- the long ones). Get a vacuum cleaner and a piece of plastic tubing ( you may need several diameters ) Put rag around tubing and put into cleaner nozzle. This should get most of the plastic out. Loosen the plug only and repeat the vacuuming this should get most if not all of the plastic out. Being plastic if a small piece gets into the combustion chamber it should not do any damage.

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: Busted plug lead

Postby myredmx5 » Tue Jan 01, 2013 9:19 am

Would you be able to fix problem by removing the cam cover?

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Busted plug lead

Postby project.r.racing » Tue Jan 01, 2013 3:12 pm

myredmx5 wrote:Would you be able to fix problem by removing the cam cover?
would make the job alot easier. easy just to break it up and vacuum it out them. just adds $30-$80 depending on the cover seal you buy.

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: Busted plug lead

Postby Jeo » Sat Jan 19, 2013 6:46 pm

For those playing at home; WD40 + extra long nose pliers got it done relatively easily.

Also, turns out two of them were busted.

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Busted plug lead

Postby bruce » Thu Jan 24, 2013 5:34 pm

bruce wrote:Squirt WD40 into hole. Allow it to soak and soften/loosen rubber.


I win...a piece of broken plug lead!

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: Busted plug lead

Postby Jeo » Thu Jan 24, 2013 10:30 pm

Yep, full points to Bruce.

Shoot us your address and I'll happily send you both busted leads. :wink:


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 53 guests