Hey all,
Have recently purchased a 2nd hand NB soft top and frame. After getting it home I noticed that the tension cable on the drivers side had rusted through and snapped. The passenger side was also rusted and was only held together by a couple of strands.
I ended up buying a replacement set of cables from MX5PARTS.CO.UK they are stainless steel, made by IL Motorsports in Germany and best of all cost 50% of the original Mazda ones. Cost me just under AUD$30 landed in Aust.
http://www.mx5parts.co.uk/hood-tension- ... p-451.html
J.
Check you soft top tension cables
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
aka_juffa
- Racing Driver
- Posts: 1005
- Joined: Wed Dec 14, 2011 2:40 pm
- Vehicle: NA8
- Location: SE Melbourne.
Check you soft top tension cables
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.
-
ricky-pinky
- Driver
- Posts: 61
- Joined: Fri May 29, 2009 5:10 pm
- Vehicle: NB8B
- Location: Wollongong, NSW
Re: Check you soft top tension cables
Hey aka_juffa. Thanks for the info. Just bought a set.
-
mazmad
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Check you soft top tension cables
While you are at it check out the drain hole on either side of the car underneath the soft top mounting.
Warning - you will be grossed out
by how much gunk is in there. BUT it is a potential rust spot go straighten a wire coat hanger and clear it out.
Warning - you will be grossed out
by how much gunk is in there. BUT it is a potential rust spot go straighten a wire coat hanger and clear it out.Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 246 guests
