What does your engine bay look like?

Si.G · Postby **Si.G** » Sat Jul 03, 2010 10:24 pm

Not the cleanest or the smartest, but here's my nearly complete ITB install, using AE101 throttle bodies on a customer manifold. Just need to make up an new throttle cable and do some mapping.

Postby **Okibi** » Sun Oct 21, 2012 12:43 am

davekmoore · Postby **davekmoore** » Sun Oct 21, 2012 1:33 am

Pixolas NB8A

Will Pixola sell me a template for his K&N heatshield? Please?

trader · Postby **trader** » Mon Oct 22, 2012 9:45 am

All bling - no go!

Uploaded with ImageShack.us

Postby **Okibi** » Mon Oct 22, 2012 8:35 pm

Looks good, someone else who's spent way too much time with a buffing wheel. :mrgreen:

zoomzoom · Postby **zoomzoom** » Tue Oct 23, 2012 8:19 pm

Still a work in progress as always. A bit rough but it does the trick.

Cheers

Tim

Apu · Postby **Apu** » Tue Oct 23, 2012 8:28 pm

Mine looks like this! Taken by Justin Fox at Zen Garage.

Postby **NitroDann** » Tue Oct 23, 2012 9:29 pm

Your engine bay looks so stock but I can spot lots of goodies in there :mrgreen:

Dann

Apu · Postby **Apu** » Tue Oct 23, 2012 9:39 pm

Yeah, it was quite funny...I had to look around to remember what's gone in.

toppertee · Postby **toppertee** » Wed Oct 31, 2012 9:34 am

zoomzoom wrote:

Still a work in progress as always. A bit rough but it does the trick.

Cheers

Tim

Putting it mildy. It left me for dead down the back straight. One of the best mx5 at the track day. I was really impressed with it.

toppertee · Postby **toppertee** » Wed Oct 31, 2012 9:36 am

My unit, all 100hp of it :mrgreen:

Joshhh · Postby **Joshhh** » Thu Feb 25, 2016 12:41 pm

Getting this going again

Magpie · Postby **Magpie** » Thu Feb 25, 2016 1:52 pm

DSCN2808 by Eipeip, on Flickr

hks_kansei · Postby **hks_kansei** » Thu Feb 25, 2016 1:59 pm

https://flic.kr/p/tQoXEz

Like that.

but with the rocker breather relocated to a filter hidden inside the guard rather than just a pipe to the ground.