Hey guys, I'm new around here as well as new to MX5s
this site is really great in regards to information and the people are all friendly,
so I'm very happy to be here and have to decided to make my first build thread ever!
BACKGROUND:
My names Tim and I'm currently studying Commerce at Deakin Uni & working part time in Harbour Town Docklands.
I've got an extensive background with Nissans (s-chassis) so the move to MX5 has been really different!
First car :
- 90 Nissan Silvia S13
short story; blew the motor after 2 weeks, over a few months dropped in a S15 SR20DE, s14 box, hks extractors, coilovers, locker and a few exterior bits and pieces.
First cars always the best and i'll always miss her
After I sold her I bought a S14, then bought a 180sx shell with another S15 SR20DE and dropped it into the S14 and sold that for a nice profit. With the remainder I bought a S13 KSeries turbo and built it for drifting and took it to a Calder event where some idiot smashed into me
Ended up swapping that for my current car: MX5 which was previously owned by a fellow forum member Henry/Dorifuto.
Here she is ::
1990 Mazda NA6CE MX5
Non Power Steering with Air-conditioning model
Engine:
- Aftermarket Extractors
- Cams
-Block has been shaved
- Tuned for those mods
- Aftermarket exhaust
- Water Pump, Timing Belt and Fan belt been changed ( 9/3/2011 )
Suspension & Handling:
- Racing Logic Coilovers
- Cusco 4 Point Cage
- Brakes have been overhauled and new pads
- Front Strut Brace
Wheels:
- Stock Daisy with good fronts tyres and not so good rear tyres
- ROH 15x6+45 wheels with Bridgestone Potenzas 002
Misc:
- Factory Hardtop
- Factory Front Lip
- Welded Diff
After taking ownership from Henry
I really fell in love with the car and how it feels.
Found every excuse to drive the car and clocked close to 700km's average a week!
Roof on/Roof off ~ awesome experience!
Also entered the Melbourne S15 Clubs Winton Track day on the 15th of September
and managed to do a 1.56 for my first time at a grip event.
Some pics from the event:
Future Plans:
- Ordered new coilovers "Yellowspeed Dynamic Pros"
- New wheels *STAY TUNED*
- Fresh Paint
- t25/t28 turbo setup
- NB brake upgrade
- NB diff upgrade
Thanks for reading big things popping in the coming weeks
nGtim's NA6 build
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- nGtim
- Driver
- Posts: 51
- Joined: Sat Aug 18, 2012 11:21 pm
- Vehicle: NA6
nGtim's NA6 build
http://www.dtpanels.com.au/ | | kits . panels . paint
- JRBasia
- Fast Driver
- Posts: 166
- Joined: Fri Nov 18, 2011 12:52 pm
- Vehicle: NA6
- Location: Melbourne, Victoria
Re: nGtim's NA6 build
Well done Tim and welcome
I saw this car for sale and thought it was a pretty good buy. Funny you're the one who scored it!
Looks like it's had its far share of goodies on it, excited for the future!
JB
I saw this car for sale and thought it was a pretty good buy. Funny you're the one who scored it!
Looks like it's had its far share of goodies on it, excited for the future!
JB
-
- Driver
- Posts: 27
- Joined: Mon Oct 08, 2012 8:57 pm
Re: nGtim's NA6 build
i'm about to make the jump from nissans to mazdas myself so your thread interests me heaps.
Good luck with the build.
Good luck with the build.
- nGtim
- Driver
- Posts: 51
- Joined: Sat Aug 18, 2012 11:21 pm
- Vehicle: NA6
Re: nGtim's NA6 build
Mid-update ~ a break from Exam preparation !
Late night studying is sending me mental so heres an update!
please excuse INSTAGRAM pics as my SLR doesn't want to read the memory card anymore
Car is currently not running for over a month now
After Winton my diff sh*t it self.
Reasoning : Brand new Potenza re0002 all round + drift = blown diff -___-v
Currently sits with my friends KE70.
On the upside:
- Purchase of NB8C diff from Yahoo Auctions. $450 delivered. Could not justify paying over $1000 for a NB set up..
which includes drive shaft, halfstubs and diff (practically everything.. I hope) EST 10weeks delivery.
Aaron @ Import Monster is sorting that out for me!
-Purchase of NA6 Diff for temporary run around until NB upgrade arrives from JLAND, thanks to NitroDann,
Arriving later this week.
-Payment and Order of Yellowspeed Coilovers via Wholesale Suspensions in Sydney
-Payment made for Wheels EST 6 weeks delivery from Japan
-A few goodies arrived from Japan
RAYBRIGS:
Bride Passenger Rails (bottom mount)
350 MM Nardi Deep Corn (GENUINE) + VERTEX forever race wheel
That's about it for now. Exams are over on Wednesday and I can't wait to piece all the new bit's together !!
Missing roadster life hard!
Late night studying is sending me mental so heres an update!
please excuse INSTAGRAM pics as my SLR doesn't want to read the memory card anymore
Car is currently not running for over a month now
After Winton my diff sh*t it self.
Reasoning : Brand new Potenza re0002 all round + drift = blown diff -___-v
Currently sits with my friends KE70.
On the upside:
- Purchase of NB8C diff from Yahoo Auctions. $450 delivered. Could not justify paying over $1000 for a NB set up..
which includes drive shaft, halfstubs and diff (practically everything.. I hope) EST 10weeks delivery.
Aaron @ Import Monster is sorting that out for me!
-Purchase of NA6 Diff for temporary run around until NB upgrade arrives from JLAND, thanks to NitroDann,
Arriving later this week.
-Payment and Order of Yellowspeed Coilovers via Wholesale Suspensions in Sydney
-Payment made for Wheels EST 6 weeks delivery from Japan
-A few goodies arrived from Japan
RAYBRIGS:
Bride Passenger Rails (bottom mount)
350 MM Nardi Deep Corn (GENUINE) + VERTEX forever race wheel
That's about it for now. Exams are over on Wednesday and I can't wait to piece all the new bit's together !!
Missing roadster life hard!
http://www.dtpanels.com.au/ | | kits . panels . paint
-
- Fast Driver
- Posts: 495
- Joined: Fri Apr 08, 2011 3:12 pm
- Vehicle: NA6
- Location: Sydney
Re: nGtim's NA6 build
Your mx5 is really similar to mine in modifications. What is your engine specs? Camshaft size, duration, lift, etc.. How much is the block decked and how much power are you making at the wheels?
-
- Learner Driver
- Posts: 23
- Joined: Fri Oct 12, 2012 2:24 pm
- Vehicle: NB8B
- Location: Annerley, QLD
Re: nGtim's NA6 build
Good luck, this sounds really exciting!
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: nGtim's NA6 build
I forgot to tell you the diff has been waiting at the depot for you for 2 days now, go get it!
I figured they would have called you but Im still getting auto generated emails from them.
Dann
I figured they would have called you but Im still getting auto generated emails from them.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- nGtim
- Driver
- Posts: 51
- Joined: Sat Aug 18, 2012 11:21 pm
- Vehicle: NA6
Re: nGtim's NA6 build
spikes wrote:Your mx5 is really similar to mine in modifications. What is your engine specs? Camshaft size, duration, lift, etc.. How much is the block decked and how much power are you making at the wheels?
Unfortunately unsure! But I hope to maybe try find some specs in the near future once I get a chance to speak to the previous owner again!
NitroDann wrote:I forgot to tell you the diff has been waiting at the depot for you for 2 days now, go get it!
I figured they would have called you but Im still getting auto generated emails from them.
Dann
Haha! That's awesome I'll go pick it up tomorrow right after my last exam! Cheers again Dann!
http://www.dtpanels.com.au/ | | kits . panels . paint
- mrpham
- Forum sponsor
- Posts: 856
- Joined: Tue Sep 20, 2011 8:42 pm
- Vehicle: NA6
- Location: Brisbane
- Contact:
Re: nGtim's NA6 build
Nice clean car mate!
I also migrated from a S-Chassis, S15, and very happy with the decision.
I also migrated from a S-Chassis, S15, and very happy with the decision.
Current Forum Specials!
Frame Rail Braces - http://goo.gl/xJtRTs
COPs Bracket - http://goo.gl/sxJWhF
Build Thread - http://goo.gl/L3ZuKU
Frame Rail Braces - http://goo.gl/xJtRTs
COPs Bracket - http://goo.gl/sxJWhF
Build Thread - http://goo.gl/L3ZuKU
Who is online
Users browsing this forum: No registered users and 328 guests