Lap times
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
Done a 1.11.2 at wakefield today on khumo treaded slicks.
Na model, standard bilstein shocks kingsprings, 2 and half inch exhaust after factory headers. 93kw
Na model, standard bilstein shocks kingsprings, 2 and half inch exhaust after factory headers. 93kw
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
treaded slicks?
what type of Kumho's?
awesome time - gives me some hope of getting low 12's!
what type of Kumho's?
awesome time - gives me some hope of getting low 12's!
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
- DanZig
- Fast Driver
- Posts: 187
- Joined: Wed Nov 23, 2011 12:33 pm
- Vehicle: NA6
- Location: Adelaide
Re: Lap times
NA6 standard except king spring lows:
Michelin PilotSport 3
Mallala:
1:32.6
Collingrove:
39.44
Michelin PilotSport 3
Mallala:
1:32.6
Collingrove:
39.44
- DanZig
- Fast Driver
- Posts: 187
- Joined: Wed Nov 23, 2011 12:33 pm
- Vehicle: NA6
- Location: Adelaide
Re: Lap times
New Collingrove PB:
38.86
38.86
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
Managed a 1.06.1 @ SMP South today at FoSC
new track, plenty more in it as I learn. aim for a 1.04
new track, plenty more in it as I learn. aim for a 1.04
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
The same ones you were using evil
khumo v700 from peaks performance.
As it is ill do a 1.10" something, just gota smooth out a few of the corners, brake a tad later. That time was done in lap 2 of the race! Tyres were still comming up to temp.
khumo v700 from peaks performance.
As it is ill do a 1.10" something, just gota smooth out a few of the corners, brake a tad later. That time was done in lap 2 of the race! Tyres were still comming up to temp.
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
That's awesome mate!
I must be doing something majorly wrong or can't drive for sh*t haha
I must be doing something majorly wrong or can't drive for sh*t haha
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
(breathing life into a new thread........)
At Wakefield today, cracked 1.1400 a number of times, the best being 1.13.55 new pb.
Think I have finally earnt some added horespower. Wanted to wait until I improved before adding horses, so the engine is bog standard....now to formulate the wish list.....
At Wakefield today, cracked 1.1400 a number of times, the best being 1.13.55 new pb.
Think I have finally earnt some added horespower. Wanted to wait until I improved before adding horses, so the engine is bog standard....now to formulate the wish list.....
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
Well done Craig!
As many have said here, one of the best mods is seat time!
As many have said here, one of the best mods is seat time!
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
Thanks Chris, and yeah too true. Got some good advice - some right here on this forum - when I got started 6 months ago.
Actually, the best advice was - from Stewart I think - listen to lots of advice, but ignore all of it.
Actually, the best advice was - from Stewart I think - listen to lots of advice, but ignore all of it.
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: Lap times
a PB yesty but not by much...a tenth!
down to a 1.12.7 - way off motomenaces' pace - gimmie them slicks Matty!!!!!!
thought it was going to be a better day as ran a 1.12.9 in qual where I normally run low 13's so thought I had potential to get low 12's!
oh well, as they say there is always next time.
oh, thought I might add car was tuned and makes 82rwkw so Im still happy to be in the 12's consistantly with that power (lack of!)
down to a 1.12.7 - way off motomenaces' pace - gimmie them slicks Matty!!!!!!
thought it was going to be a better day as ran a 1.12.9 in qual where I normally run low 13's so thought I had potential to get low 12's!
oh well, as they say there is always next time.
oh, thought I might add car was tuned and makes 82rwkw so Im still happy to be in the 12's consistantly with that power (lack of!)
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
- Suspense
- Racing Driver
- Posts: 635
- Joined: Mon Apr 11, 2011 10:00 pm
- Vehicle: NB8B
- Location: Sydney
Re: Lap times
They're awesome times Craig! Is the car still basically stock with R specs? Love to see how some more horses under the bonnet would improve things!
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
Had to update,
Managed a best lap of 1.10.5 in a race yesterday at mra round 1.
Was running slicks in reasonable condition.
Very happy, now need more straight line speed!!
Managed a best lap of 1.10.5 in a race yesterday at mra round 1.
Was running slicks in reasonable condition.
Very happy, now need more straight line speed!!
-
- Racing Driver
- Posts: 1854
- Joined: Fri Jul 06, 2012 4:02 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Re: Lap times
Thanks Spence. A few handling mods PSS9 coilovers and ebc pads, 6ul wheels, on semi's toyo r888's. And safety stuff, roll-bar, seat, harness etc etc. pwr radiator and heavy duty clutch - those last two, won't make it go faster, just hopefully keep it going longer
Now I wanna add some horses....
Hey Chris well done, a new pb is a new pb! Will watch your vid.
Now I wanna add some horses....
Hey Chris well done, a new pb is a new pb! Will watch your vid.
-
- Fast Driver
- Posts: 222
- Joined: Tue Jun 15, 2010 7:00 pm
- Vehicle: NA8
Re: Lap times
Ill give u the slicks off my car that i used. Still good enough for another track day or so.
Still have plenty of grip and come up to temp well!!. Only thing is u need 8inch wheels as they are 220/225 profile.
But u can have them as i have 2 newer sets just sitting that will go off if they sit too long.
I watched your video chris and theres still alot of time in your car to find, Think by running slicks youl have the confidence to push harder. The other thing is you rev your car in 3rd when the 1.8 looses out around 7k. Ratios appear to be the same, just i dont rev mine all the way to 7500. Besides that u drive really smooth , Think you'd be a good co-driver for the 300races next year!!!
I think 1.10's is all a standard motor can muster around there!! A 6 speed might let it see high 9's.
As long as we get faster each weekend we go out were doing ok ;)
Still have plenty of grip and come up to temp well!!. Only thing is u need 8inch wheels as they are 220/225 profile.
But u can have them as i have 2 newer sets just sitting that will go off if they sit too long.
I watched your video chris and theres still alot of time in your car to find, Think by running slicks youl have the confidence to push harder. The other thing is you rev your car in 3rd when the 1.8 looses out around 7k. Ratios appear to be the same, just i dont rev mine all the way to 7500. Besides that u drive really smooth , Think you'd be a good co-driver for the 300races next year!!!
I think 1.10's is all a standard motor can muster around there!! A 6 speed might let it see high 9's.
As long as we get faster each weekend we go out were doing ok ;)
Return to “Laptimes and Dyno Results”
Who is online
Users browsing this forum: No registered users and 14 guests