V6 supercharged 3.8 into NA MX5

Discussion regarding Turbocharged and supercharged MX-5s

Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean

steverisingsun
Learner Driver
Posts: 16
Joined: Fri Feb 10, 2012 4:58 pm

V6 supercharged 3.8 into NA MX5

Postby steverisingsun » Wed Sep 05, 2012 5:45 pm

Hi Guys,
just starting a build thread, right section I hope.
I have an early series MX5, I am fitting up the LY6 from a VT/X, auto [I am getting old]
ECU is off tomorrow to be modified, when it gets back, out comes the Commodore bits.
Photos when I can
Steve

lizard
Racing Driver
Posts: 653
Joined: Tue Jan 24, 2012 7:37 pm
Vehicle: NB SE
Location: Ueno Japan

Re: V6 supercharged 3.8 into NA MX5

Postby lizard » Wed Sep 05, 2012 7:08 pm

another butchered MX5 :cry:

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: V6 supercharged 3.8 into NA MX5

Postby NitroDann » Wed Sep 05, 2012 7:24 pm

lizard wrote:another butchered MX5 :cry:


go away.
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

noobee
Fast Driver
Posts: 393
Joined: Tue Apr 06, 2010 10:53 pm
Vehicle: NB8A
Location: Newcastle (Woodberry)

Re: V6 supercharged 3.8 into NA MX5

Postby noobee » Wed Sep 05, 2012 7:34 pm

variety is the spice of life they say!I for one love seeing improvisation and ingenuity.do it with lots of pictures.
should a build thread be in the garage section though?
Mick

User avatar
Beelzeboss
Fast Driver
Posts: 323
Joined: Tue May 03, 2011 3:59 pm
Vehicle: Non MX-5
Location: Sydney
Contact:

Re: V6 supercharged 3.8 into NA MX5

Postby Beelzeboss » Wed Sep 05, 2012 11:44 pm

If you're in NSW you won't be able to register this :( however I'm looking forward to seeing the pics :)
Andrew
Image
NA-6 2.5 KL V6
http://barberprecision.com.au/

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: V6 supercharged 3.8 into NA MX5

Postby davekmoore » Wed Sep 05, 2012 11:51 pm

lizard wrote:another butchered MX5 :cry:


and your point is?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

Zohxoco
Fast Driver
Posts: 233
Joined: Sun Jun 06, 2010 12:20 pm
Location: Sydney

Re: V6 supercharged 3.8 into NA MX5

Postby Zohxoco » Thu Sep 06, 2012 12:40 am

Photos or it didn't happen! :lol: Awesome!

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: V6 supercharged 3.8 into NA MX5

Postby PaulF » Thu Sep 06, 2012 4:05 am

lizard wrote:another butchered MX5 :cry:

Image

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: V6 supercharged 3.8 into NA MX5

Postby 93_Clubman » Fri Sep 07, 2012 11:59 am

Good on you Steve - great to hear about a different approach to MX5 modding on the forum.

For interested readers it might be worth including your initial thread on this for background:
viewtopic.php?f=29&t=52000

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: V6 supercharged 3.8 into NA MX5

Postby Lokiel » Fri Sep 07, 2012 12:19 pm

I'll be following this out of "morbid curiousity" alone (while I admire ingenuity, I can't understand why you put yourself through all this grief when there are many better alternatives available).
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

User avatar
Old Dude
Racing Driver
Posts: 1166
Joined: Tue Apr 07, 2009 8:06 pm
Vehicle: NB8B
Location: Gold Coast

Re: V6 supercharged 3.8 into NA MX5

Postby Old Dude » Fri Sep 07, 2012 7:40 pm

lizard wrote:another butchered MX5 :cry:


They probably said the same thing about the Ace
ace.jpg


until it became the cobra
cobra.jpg


cheers
Dale 8)
You do not have the required permissions to view the files attached to this post.
"Everybody dies......, but not everybody lives" ;-)

MX 5 2001 Grace Green
NB8B

User avatar
Aussie Stig
Stig
Posts: 540
Joined: Wed Aug 10, 2011 9:14 pm

Re: V6 supercharged 3.8 into NA MX5

Postby Aussie Stig » Sat Sep 08, 2012 1:01 pm

By all accounts the 289 cobra was a sweet car, the 427 an undriveable monster. There is such a thing as too much power.
Image

It is a known fact that 50% of people are of less than average intelligence

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: V6 supercharged 3.8 into NA MX5

Postby davekmoore » Sat Sep 08, 2012 2:03 pm

Is the original engine broken and you had a spare free 3.8 in the shed?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

steverisingsun
Learner Driver
Posts: 16
Joined: Fri Feb 10, 2012 4:58 pm

Re: V6 supercharged 3.8 into NA MX5

Postby steverisingsun » Sun Sep 09, 2012 8:26 pm

My choosing the L67 was due to it being a very compact engine, very reliable even when pushed well up power wise [we see units over 400,000k on original engines]. Weight is similar to the LS1 which has been fitted and worked well. The donor car cost me $1850 of which I have salvaged 1/2 to cars we were repairing. The poor MX5 goes ok, what budget would I need to get into the 12's with a Mazda engine? Using the commode diff, balance should be close to 50/50 as the yanks get close with the Winsor or LS1's. I can't find anyone who has tried this as most yankie 3.8's are FWD, so this is no suprise. Legality is not an issue. Minor mods will see 225kw with 300kw [flywheel] achieved around Oz with stock or near stock internals, thats cheap power!
The old 1.6 is in good nice as well as the gearbox and LSD diff.
Steve

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

Re: V6 supercharged 3.8 into NA MX5

Postby wozzah1975 » Thu Sep 13, 2012 6:33 pm

steverisingsun wrote:My choosing the L67 was due to it being a very compact engine, very reliable even when pushed well up power wise [we see units over 400,000k on original engines]. Weight is similar to the LS1 which has been fitted and worked well. The donor car cost me $1850 of which I have salvaged 1/2 to cars we were repairing. The poor MX5 goes ok, what budget would I need to get into the 12's with a Mazda engine? Using the commode diff, balance should be close to 50/50 as the yanks get close with the Winsor or LS1's. I can't find anyone who has tried this as most yankie 3.8's are FWD, so this is no suprise. Legality is not an issue. Minor mods will see 225kw with 300kw [flywheel] achieved around Oz with stock or near stock internals, thats cheap power!
The old 1.6 is in good nice as well as the gearbox and LSD diff.
Steve


Good luck with the conversion, not my cup of tea but it will be definately different.

A few things.
You'll reach the limit of the size of the supercharger well before your quoted power figures, even at a genuine 225kw. 300kw with near stock internals, not likely, definately not reliably, and not cheap. If you've read it on some Holden forum somewhere it's more than likely crap.

Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292


Return to “MX5 Forced induction (Turbo/Supercharger)”

Who is online

Users browsing this forum: Google [Bot] and 63 guests