charlie's na6

Chat to do with your MX5/Miata/Eunos Garage Ride(s).
Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: charlie's na6

Postby Magpie » Thu Aug 30, 2012 9:48 pm

Charlie is your dash a logging dash or display only? If not do you have any plans for data logging?

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re: charlie's na6

Postby Regie » Fri Aug 31, 2012 12:26 am

charlie_91 wrote:For those that are in qld.. Be sure to come down to Automotive Plus on Saturday the 1st September. They'll be a sausage sizzle plus loads of cool cars :D


Image



im heading there from Sydney...keen to check out all the rides! ill have the camera with me!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
zero00
Speed Racer
Posts: 3248
Joined: Mon Apr 12, 2010 6:54 pm
Vehicle: NB8A
Location: Sunshine Coast Queensland

Re: charlie's na6

Postby zero00 » Fri Aug 31, 2012 12:52 pm

regie

Then I better polish mine tonight, armorall the valve caps and clean the windows! Maybe even vacuum the boot! Hell! why bother? everyone will want to see Charlie's car!!

see you all there :D
Roger D-SUNSHINE COAST
2000 NB8A-LP 69.1248|QR Clubman 71.9235|QR Sprint 68.1412
1989 NA6 B-SPEC #77|Toyota GTS86 MT

charlie_91
Racing Driver
Posts: 696
Joined: Wed Dec 30, 2009 11:59 am
Vehicle: NA6
Location: Brisbane, QLD

Re: charlie's na6

Postby charlie_91 » Fri Aug 31, 2012 12:58 pm

Magpie wrote:Charlie is your dash a logging dash or display only? If not do you have any plans for data logging?


It can do it but i need to buy the attachment for it but tbh that doesn't interest me at all. All I wanted was something to display everything I needed in front of me and this does it.

Update from yesterday at qr :). Finally got some decent track time with not many issues :). Pb on both sprint and clubman with a 1.02.0 on clubman and a 59.5 on sprint. I still think I can get into the 1.01s on clubman and theres definitely room to move on these tires in sprint. Happy to get sub 60's on sprint with street tires though.

I'll do a full recap on the day with vids and pics later :)
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Re: charlie's na6

Postby 16bit » Fri Aug 31, 2012 2:45 pm

thats a pretty awesome time. are you going to get semi's at some point?
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

charlie_91
Racing Driver
Posts: 696
Joined: Wed Dec 30, 2009 11:59 am
Vehicle: NA6
Location: Brisbane, QLD

Re: charlie's na6

Postby charlie_91 » Fri Aug 31, 2012 3:21 pm

yeah plan is to get some nt01's at some point but tbh im intrigued to see how quick i can go on these tires so i might order another set of these and go from there. i reckon i could go 61's on clubman and 58's on sprint with not to many issues imo..
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods

User avatar
zero00
Speed Racer
Posts: 3248
Joined: Mon Apr 12, 2010 6:54 pm
Vehicle: NB8A
Location: Sunshine Coast Queensland

Re: charlie's na6

Postby zero00 » Fri Aug 31, 2012 3:46 pm

Charlie

Gulp!! I think I will just REMOVE my 'Clubman' time from my signature!! :(
Roger D-SUNSHINE COAST
2000 NB8A-LP 69.1248|QR Clubman 71.9235|QR Sprint 68.1412
1989 NA6 B-SPEC #77|Toyota GTS86 MT

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Re: charlie's na6

Postby 16bit » Fri Aug 31, 2012 4:09 pm

sweet. nt01's are apparently pretty quick. i thick khumo v70's are also very fast and come in a 225 45 15 from memory. but very expensive.
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

charlie_91
Racing Driver
Posts: 696
Joined: Wed Dec 30, 2009 11:59 am
Vehicle: NA6
Location: Brisbane, QLD

Re: charlie's na6

Postby charlie_91 » Fri Aug 31, 2012 5:49 pm

Update :)

Track recap.

This week ive been sick as with the flu hoping id get better before the trackday on thursday.. that wasnt to be. But i pushed through anyways. Drove out to Queensland Raceway early in the morning to start a day of racing :D Plenty of fog greated me when i got out there which is cool.. I like the fog..

Image

Parked up, signed in and got given my pit bay while i waited for driver briefing.. Lets just say i wasnt feeling the best at this point..

Image

Driver briefing over and it was time to get racing.. First up was the clubman circuit. This one i wasnt to fond of before yesterday but its pretty fun now. First session out i was all over the place, understeering everywhere and oversteering is places.. Was really messy. Came off twice i think and yeah i didnt enjoy it :P next session was better but got a fair bit of traffic unfortunately but managed to do a 62.1 :)

Was stoked with my time so i was excited to get back out there.. Third session i saw consistant low 62's :)
Image

In car vid.. this shows where i smashed my lip when i went off lol
http://www.youtube.com/watch?v=bGoTLUcj ... ature=plcp

Next up was sprint track. No issues yet or so i thought.. went out first session and the car was really hesistant coming onto boost. So i went back in pretty much straight away.. Looked around but couldnt see any issues.. Second session out it was the same but cleared up so i pushed it. Finally dropped into sub 60's with a 59.5. Very stoked with that.

Heres the in car vid
http://www.youtube.com/watch?v=IhlB4zdA ... ature=plcp

Few pics
Hard on the brakes
Image

Image

Pic i found of me taking the evo turn 6 exit
Image

Arvo session came and went back out on clubman track and once again beat my pb with a 62.02 :D Not by much but enough haha. Car was starting to feel really good and i was getting use to it now. Few sessions later they opened back up sprint track to finish the day. Once again the car was really hesitant and would not rev over 5.5k rpm :/ i was confused by this.. Decided to come back in and give it a rest and then try again next session. Went back out and it just wasnt getting better. I decided to call it a day and leave on a high before i broke something :P

The next day i took it for a drive to see how it felt and it was perfect again.. Have no idea why it went the way it did but yeah... stupid cars. Anyways its back in it street mode ready for a few events over the weekend :)

Image
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods

rxmx
Fast Driver
Posts: 338
Joined: Tue Dec 16, 2003 11:43 pm
Vehicle: NA6 - Turbo
Location: Sydney

Re: charlie's na6

Postby rxmx » Fri Aug 31, 2012 7:14 pm

Lookin good Charlie, where are you getting your RS3s from tire rack?
http://www.facebook.com/purefabcustom

EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics

E85 tune - 445hp @ wheels 17psi

Timmeh
Fast Driver
Posts: 214
Joined: Thu Jun 14, 2012 7:29 pm
Vehicle: NA6

Re: charlie's na6

Postby Timmeh » Fri Aug 31, 2012 7:40 pm

awesome man,
how did foy go?
was it your Go Pro he threw at 150 kph lol?
Norwell: 1:14.3

User avatar
tobias
Fast Driver
Posts: 300
Joined: Wed Jul 06, 2011 10:10 pm
Vehicle: NA6
Location: melbourne

Re: charlie's na6

Postby tobias » Fri Aug 31, 2012 8:12 pm

Can you put a pic up of how you mount the canards please

charlie_91
Racing Driver
Posts: 696
Joined: Wed Dec 30, 2009 11:59 am
Vehicle: NA6
Location: Brisbane, QLD

Re: charlie's na6

Postby charlie_91 » Fri Aug 31, 2012 9:16 pm

rxmx wrote:Lookin good Charlie, where are you getting your RS3s from tire rack?

cheers dude :) yeah just from tire rack :)

Timmeh wrote:awesome man,
how did foy go?
was it your Go Pro he threw at 150 kph lol?

Haha nar it was another mates lol :P he did pretty well but unfortunately no pb's

tobias wrote:Can you put a pic up of how you mount the canards please

It's just bolted to the bumper.. Not sure how else I can put it or how many other ways there are to do it lol
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods

User avatar
zero00
Speed Racer
Posts: 3248
Joined: Mon Apr 12, 2010 6:54 pm
Vehicle: NB8A
Location: Sunshine Coast Queensland

Re: charlie's na6

Postby zero00 » Fri Aug 31, 2012 9:41 pm

Charlie

Great times, great video, great pics!!

Well done getting those laps times, I'd match them but just haven't found a short-cut!! Was that 'little off' in turn 3 the one that did the damage?

See ya tomorrow at the Open Day
Roger D-SUNSHINE COAST
2000 NB8A-LP 69.1248|QR Clubman 71.9235|QR Sprint 68.1412
1989 NA6 B-SPEC #77|Toyota GTS86 MT

charlie_91
Racing Driver
Posts: 696
Joined: Wed Dec 30, 2009 11:59 am
Vehicle: NA6
Location: Brisbane, QLD

Re: charlie's na6

Postby charlie_91 » Tue Sep 04, 2012 2:52 pm

update:

but not much to update.. another vid thats my mate took.

http://www.youtube.com/watch?v=v4yHoRoS ... 7z_V0EIoGw

more pics of it without the wing and the canards :)

Image

Image

Image

Also diggin this pic A LOT.

Image
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 54 guests