charlie's na6
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
Hey Charlie, do you have a log of intake temps that you can share? I'm curious to see what most folks run with and your intercooler doesn't look that massive, so I'm interested to learn what is seens as typcial and normal for when under hard boost/track work.
Does your ECU allow you to easily log data?
G
Does your ECU allow you to easily log data?
G
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
i could probs get some for u..
So finally got my new boot delivered.. Was so excited, till i opened it up
Back corners broken off and crack in the main duck tail part >:( So pissed. Thinking of what to do now.
So finally got my new boot delivered.. Was so excited, till i opened it up
Back corners broken off and crack in the main duck tail part >:( So pissed. Thinking of what to do now.
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: charlie's na6
Did you get insured shipping, if so and the carton was damaged claim on them.
otherwise raise the issue of it being improperly packed with the seller and ask for replacement / refund
Sent from my GT-I9100 using Tapatalk 2
otherwise raise the issue of it being improperly packed with the seller and ask for replacement / refund
Sent from my GT-I9100 using Tapatalk 2
- PaulF
- Racing Driver
- Posts: 1807
- Joined: Fri Jan 28, 2011 5:55 pm
- Vehicle: NA6
- Location: Newcastle, NSW
Re: charlie's na6
That sucks mate; I hope you get it sorted out.
-
- Racing Driver
- Posts: 661
- Joined: Fri Oct 24, 2008 7:47 pm
- Vehicle: NA6
- Location: Geelong
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: charlie's na6
Yes, send a nice polite email to the seller with pictures, and ask for a replacement. Then sell me the busted one for $50.
-
- Racing Driver
- Posts: 699
- Joined: Mon Jul 11, 2011 4:16 pm
- Vehicle: NA6
- Location: Brisbane
Re: charlie's na6
Really unlucky.
If all else fails, there is a bloke in brisbane who makes repairs to C/F parts and bikes etc. He made a repair for me on my track bike. You couldn't even see the repair marks.
If all else fails, there is a bloke in brisbane who makes repairs to C/F parts and bikes etc. He made a repair for me on my track bike. You couldn't even see the repair marks.
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
Update:
So decided to just repair and repaint the boot.. because the corners snapped off theres a bit of work in fixing that and the crack so all up with respray its looking to be $500 :'(. After the initial quote over the phone of $300 theres more work involved then he though so FML. Talk about an expensive bootlid :O. Better look farking sick haha
Also went out today and bought a new/better helmet and visor.. My one atm is sh*t and to tight so i want something that is gonna fix me better.
Got my spacers from Bill @ Miataroadster.com. 20mm for the rear and 15mm for the front.. This will be used for the bbk when he finishes them and will always fill out the guards a lot better. Pics will come with them mounted soon.
Plugs will finally be here tomorrow so that the wiring harness is almost finished. Thank ƒü¢k. A few more things and its ready to race on the 30th Very keen
So decided to just repair and repaint the boot.. because the corners snapped off theres a bit of work in fixing that and the crack so all up with respray its looking to be $500 :'(. After the initial quote over the phone of $300 theres more work involved then he though so FML. Talk about an expensive bootlid :O. Better look farking sick haha
Also went out today and bought a new/better helmet and visor.. My one atm is sh*t and to tight so i want something that is gonna fix me better.
Got my spacers from Bill @ Miataroadster.com. 20mm for the rear and 15mm for the front.. This will be used for the bbk when he finishes them and will always fill out the guards a lot better. Pics will come with them mounted soon.
Plugs will finally be here tomorrow so that the wiring harness is almost finished. Thank ƒü¢k. A few more things and its ready to race on the 30th Very keen
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
Update:
So today has been a sick day. First off. Went to work and got told im doing a night shift so i got to go home Thought about what to do and decided to make a cluster panel to mount my Stack cluster to
Went down and got a template of the cluster, traced that onto some flat material i had laying around at home and proceded to cut the shape out
Went back down to test fit it and make sure it was gonna work. It was. So i traced out where i needed to cut a hole in a the back and came back home to do that. Few coats of paint later and it was ready to go. Took it back down with a drill to drill the holes in the back to mount the actual cluster. All goooood.
and test fitted it in the cabin
So wrapped with the outcome. Very very happy with it One less thing to do now ;)
Also the plugs ive been waiting for finally came in So my harness was finished off ready to be put back into the car
So today has been a sick day. First off. Went to work and got told im doing a night shift so i got to go home Thought about what to do and decided to make a cluster panel to mount my Stack cluster to
Went down and got a template of the cluster, traced that onto some flat material i had laying around at home and proceded to cut the shape out
Went back down to test fit it and make sure it was gonna work. It was. So i traced out where i needed to cut a hole in a the back and came back home to do that. Few coats of paint later and it was ready to go. Took it back down with a drill to drill the holes in the back to mount the actual cluster. All goooood.
and test fitted it in the cabin
So wrapped with the outcome. Very very happy with it One less thing to do now ;)
Also the plugs ive been waiting for finally came in So my harness was finished off ready to be put back into the car
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
- PaulF
- Racing Driver
- Posts: 1807
- Joined: Fri Jan 28, 2011 5:55 pm
- Vehicle: NA6
- Location: Newcastle, NSW
Re: charlie's na6
I love how simple and focused your interior is. Do you still have a heater? Just noticed that you've still got the holes in the top of the dash for demisting. Sorry if you've mentioned this somewhere, but I can't be bothered going through 54 pages to try and find it.
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
cheers dude thats what i was going for . I got rid of the heater but i still have a fan so they sort of demist the window.. Not really though lol
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
-
- Fast Driver
- Posts: 495
- Joined: Fri Apr 08, 2011 3:12 pm
- Vehicle: NA6
- Location: Sydney
Re: charlie's na6
Try putting some rainex or catcrap on the inside of the windscreen dude, you can get them from motorbike shops for putting on the inside of your visor to stop it from fogging up on rainy rides. Works great
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
Thanks mate its only really bad when I have an early morning track day and it's like dewy on the windscreen.
Makes it for an interesting first drive lol
Makes it for an interesting first drive lol
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
-
- Racing Driver
- Posts: 696
- Joined: Wed Dec 30, 2009 11:59 am
- Vehicle: NA6
- Location: Brisbane, QLD
Re: charlie's na6
Time for the next meet! Once again, we have a sausage sizzle, promo girls, demo cars, it's all here. Put it in your diaries, coz you definitely don't want to miss this!
To be able to keep this as a regular meet, it is important that you follow the CONDITIONS OF ATTENDANCE
*YOU are responsible for the guys you bring to the meet, and hang with. If they act like idiots, we will find out who it was. Brisbane is a very small place. In addition, we will be recording number plates for both insurance and policing purposes.
*THROW RUBBISH IN THE BIN. There's bins - use them. If they're full, just chuck it in your car and throw it out next time you fill up.
*Dont do skids, laps, rev engine, be antisocial in any way.
*Plates will be recorded and forwarded to the cops, depending on how much of a hottie you are. Dropping skids on the grass will be reported to police. We will also have a camera on the exit to film people doing skids to leave. Do iit somewhere else guys - I'll even give you some tips as long as you don't do it at our meet.
Date: Saturday 1 September 2012, 2 - 5pm
Location: Rocklea Showgrounds, Goburra Street, Rocklea. Link to map http://g.co/maps/xdnm3 HERE. We will be using the trotting track to park up around the edge..
Make sure you support the people that support you!
http://www.facebook.com/fatfitment Fat Fitment
http://www.justcarinsurance.com.au Just Car Insurance
http://www.trublutint.com.au Tru Blu Tint
http://www.fulcrumsuspensions.com.au Fulcrum Suspensions
http://cdrpaintandpanel.com.au CDR Paint and Panel
http://www.cartel-aus.com Cartel Australia
http://www.facebook.com/FieldGarageAustralia Field Garage
The meets are open to any cars, whether they be JDM, Euro, Hot Rod or Aussie. The idea is to have like-minded, respectful, appreciative people there, who can also follow some very basic rules. IF you can do those things, we'll see you at the meet, and you'll be welcomed with open arms.
Join the discussion here: http://forum.downshiftaus.com/showthrea ... ember-Meet
http://g.co/maps/xdnm3 HERE
For anyone that is going to the Automotive Plus open day in the morning .. Ill be leading a group of cars to the meet around 12.30 - 1.00 pm so feel free to tag along
To be able to keep this as a regular meet, it is important that you follow the CONDITIONS OF ATTENDANCE
*YOU are responsible for the guys you bring to the meet, and hang with. If they act like idiots, we will find out who it was. Brisbane is a very small place. In addition, we will be recording number plates for both insurance and policing purposes.
*THROW RUBBISH IN THE BIN. There's bins - use them. If they're full, just chuck it in your car and throw it out next time you fill up.
*Dont do skids, laps, rev engine, be antisocial in any way.
*Plates will be recorded and forwarded to the cops, depending on how much of a hottie you are. Dropping skids on the grass will be reported to police. We will also have a camera on the exit to film people doing skids to leave. Do iit somewhere else guys - I'll even give you some tips as long as you don't do it at our meet.
Date: Saturday 1 September 2012, 2 - 5pm
Location: Rocklea Showgrounds, Goburra Street, Rocklea. Link to map http://g.co/maps/xdnm3 HERE. We will be using the trotting track to park up around the edge..
Make sure you support the people that support you!
http://www.facebook.com/fatfitment Fat Fitment
http://www.justcarinsurance.com.au Just Car Insurance
http://www.trublutint.com.au Tru Blu Tint
http://www.fulcrumsuspensions.com.au Fulcrum Suspensions
http://cdrpaintandpanel.com.au CDR Paint and Panel
http://www.cartel-aus.com Cartel Australia
http://www.facebook.com/FieldGarageAustralia Field Garage
The meets are open to any cars, whether they be JDM, Euro, Hot Rod or Aussie. The idea is to have like-minded, respectful, appreciative people there, who can also follow some very basic rules. IF you can do those things, we'll see you at the meet, and you'll be welcomed with open arms.
Join the discussion here: http://forum.downshiftaus.com/showthrea ... ember-Meet
http://g.co/maps/xdnm3 HERE
For anyone that is going to the Automotive Plus open day in the morning .. Ill be leading a group of cars to the meet around 12.30 - 1.00 pm so feel free to tag along
NA6 - Longnose engine, JR cai, full custom exhaust, BC coilovers, NA8 front brakes, frog arms, cusco cage, secret element tie rods
-
- Fast Driver
- Posts: 128
- Joined: Fri Jun 10, 2011 10:45 pm
- Vehicle: NB8A
Re: charlie's na6
I'd love to go but it seems a bit awkward going in a car with barely any offset, have to wait at least 4 weeks for my wheels
Who is online
Users browsing this forum: No registered users and 50 guests