Replacing top radiator hose

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
wiz043
Fast Driver
Posts: 166
Joined: Wed Nov 10, 2010 7:14 am

Replacing top radiator hose

Postby wiz043 » Tue Jul 31, 2012 8:53 am

I need to replace the top radiator hose on my 1999 MX5 auto. Is this a job any mug with a screwdriver can do or is it a bit more involved?
I would imagine you would need to drain some coolant from the top radiator tank into a container, remove the old hose and replace it and then put the drained coolant back in....is it that simple?
Also, could you please advise the location of the drain plug. Thanks.
Top
vrmmmpshhh
Racing Driver
Posts: 533
Joined: Mon May 19, 2003 11:00 am
Vehicle: NA6
Location: Adelaide
Contact:
Contact vrmmmpshhh

Re: Replacing top radiator hose

Postby vrmmmpshhh » Tue Jul 31, 2012 9:12 am

The drain is on the bottom in the middle, there is a round cap on the undertray you remove to get to it and you'll need a Phillips head to remove the plug. The radiator hose is very simple to remove. Just need vice grips or pliers. I'd probably replace the clamps though.
Top
User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:
Contact Guran

Re: Replacing top radiator hose

Postby Guran » Tue Jul 31, 2012 9:18 am

Easy job John. Let me know if you need help (although I'm headed to Phillip island this Fri to Mon).
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
Top
Hjt
Speed Racer
Posts: 2499
Joined: Thu Jan 13, 2011 12:46 pm
Vehicle: NB8A

Re: Replacing top radiator hose

Postby Hjt » Tue Jul 31, 2012 12:18 pm

I did this last week, I undid both clamps, removed radiator cap, pulled the hose, shoved in a new hose from supercheapauto($20) and redid the clamps.

You can make it more technical if you wish then just top the water/coolant up and remove any air bubbles from the engine before the cap goes on.
Top
Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Replacing top radiator hose

Postby Mr Morlock » Tue Jul 31, 2012 2:19 pm

remember that mixed coolant is a nasty product- gloves required and do not spill on paintwork. You can also draw off coolant by siphoning with a hose into a clean container.
Top
User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

Re: Replacing top radiator hose

Postby gslender » Tue Jul 31, 2012 2:25 pm

Mr Morlock wrote:remember that mixed coolant is a nasty product- gloves required and do not spill on paintwork. You can also draw off coolant by siphoning with a hose into a clean container.


It's not that bad. Bottom screw on radiator is easier than siphoning. I've never seen it do anything to paint, though I wash or wipe clean when I spill any. You're not thinking of brake fluid are you?

G
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
Top
Hjt
Speed Racer
Posts: 2499
Joined: Thu Jan 13, 2011 12:46 pm
Vehicle: NB8A

Re: Replacing top radiator hose

Postby Hjt » Tue Jul 31, 2012 4:53 pm

pfft my coolant went everywhere. I just doused the area with hot clean water to tidy it up afterwards!
Top
wiz043
Fast Driver
Posts: 166
Joined: Wed Nov 10, 2010 7:14 am

Re: Replacing top radiator hose

Postby wiz043 » Tue Jul 31, 2012 5:00 pm

Guran wrote:Easy job John. Let me know if you need help (although I'm headed to Phillip island this Fri to Mon).


Thanks Bryan and others. You have confirmed what I thought was the method.
Have ordered one from Supercheap to instal. :lol: :lol:
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 99 guests