Wideband recommendations

sabretooth · Postby **sabretooth** » Fri Jul 20, 2012 10:16 pm

saboteur wrote:You might need to get a bung welded in a bit further down, too. From memory the current location is right near the turbo outlet?

I think you're on the money here. And I can get the bung moved this weekend - bam!

Sean · Postby **Sean** » Sun Jul 22, 2012 9:04 pm

aka_juffa wrote:Hey Geoff,

I had an aussie made wideband setup in my last 5. Not the cheapest on the block, but I found their support and product quality to be great. I believe you can get a DIY kit.

http://www.wb02.com

J.

x2.

I've had one of theirs for what seems like ages, have run heaps of cars on it and move it from car to car with a tailpipe adapter and long loom.

Works well, has always been reliable and like almost every wideband system accepts a reasonably standard and easy to aquire and replace sensor.

wydra · Postby **wydra** » Wed Aug 08, 2012 2:41 pm

Hi guys,

Just to dig this up again, has anyone tried the Innovate MTX-L gauge units? $199 and the controller is in the gauge.
http://www.diyautotune.com/catalog/inno ... p-467.html

The other option is I'll just go the LT-01 route. $199 for controller/sensor only. $209 for controller/sensor/basic digital gauge. $249 for controller/sensor/analog gauge.
http://www.diyautotune.com/catalog/inno ... -p-41.html
http://www.diyautotune.com/catalog/inno ... p-153.html
http://www.diyautotune.com/catalog/inno ... p-328.html

I will be buying very shortly so thought id get your thoughts.
Cheers,
Dale

sailaholic · Postby **sailaholic** » Wed Aug 08, 2012 4:00 pm

Yup, got one, like it much better then the lc1 before it. Much easier to know what's happening with it.

Sent from my GT-I9100 using Tapatalk 2

wydra · Postby **wydra** » Wed Aug 08, 2012 4:30 pm

Thanks for that, being the cheaper option it might be ok.
As far as I can see it does everything the LT-01 does just with the controller built into the gauge.

sailaholic · Postby **sailaholic** » Wed Aug 08, 2012 4:49 pm

Yup, does require a bigger whole in the firewall as you have a plug head rather than just cables to pass through

Sent from my GT-I9100 using Tapatalk 2

plohl · Postby **plohl** » Mon Nov 05, 2012 10:58 am

Just so everyone else knows.

The Bosch universal part number for the LSU4.2 is 0 258 007 057(old version) or 0 258 007 200(new version)

So far I have been quoted $262 and $299 from supercheap and repco respectively.

US price seems around the $80 or less. Some including shipping, some not.

edit:
from http://wbo2.com/lsu/sensors.htm thanks aka_juffa for linking this!

$97 for a 0 258 007 200

the website also has a great amount info on the sensors.