I need some tyre help

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

UngernKhan
Learner Driver
Posts: 11
Joined: Tue Dec 20, 2011 4:59 pm
Vehicle: ND - 2
Location: Melbourne

I need some tyre help

Postby UngernKhan » Mon Jun 04, 2012 5:56 pm

It's seriously time to replace my tyres, the tread is all but gone and I find that it is getting seriously dangerous in the wet. I have Pirelli P6000s fronts and Yoko s306s on the rear. 185/60/14, stock wheels.

- most likely never going to track the car
- not concerned about road noise
- I have been doing a lot of long distance freeway driving
- it's a daily but I like to drive fairly aggressively and have been known to go on a lot of twisty bashes
- have to be decent in the wet (melbourne weather)
- would like them to be economical but its the least important thing

I don't really want to spend a small fortune either, obviously.

Which tyres fit the profile and where can I get them?

Thanks a lot! :NA6: :)

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: I need some tyre help

Postby NitroDann » Mon Jun 04, 2012 6:17 pm

There are MANY treads covering this topic already. If you perform a quick search (found top right of screen) you will find a lot of the basic info.
If you still cannot find what you need after a search, feel free to post back here with a more specific question.

Cheers,
Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

UngernKhan
Learner Driver
Posts: 11
Joined: Tue Dec 20, 2011 4:59 pm
Vehicle: ND - 2
Location: Melbourne

Re: I need some tyre help

Postby UngernKhan » Mon Jun 04, 2012 6:24 pm

NitroDann wrote:There are MANY treads covering this topic already. If you perform a quick search (found top right of screen) you will find a lot of the basic info.
If you still cannot find what you need after a search, feel free to post back here with a more specific question.

Cheers,
Dann

Many treads? :D I'm searching too, but I posted a topic because I've never bought tyres before so I thought I could get some more specific help.

Thanks.

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: I need some tyre help

Postby project.r.racing » Mon Jun 04, 2012 6:45 pm

You don't get much choice in 185/60R14. Buy whatever you can.

OR buy some 15x6.5 wheels and get 195/50R15s. Also a dieing size, but not uber rare like the above size.

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Re: I need some tyre help

Postby 16bit » Tue Jun 05, 2012 11:26 am

98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: I need some tyre help

Postby Charlie Brown » Wed Jun 06, 2012 9:46 am

Kumho KU31 185x55x14, good tyre at a cheap price.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

UngernKhan
Learner Driver
Posts: 11
Joined: Tue Dec 20, 2011 4:59 pm
Vehicle: ND - 2
Location: Melbourne

Re: I need some tyre help

Postby UngernKhan » Wed Jun 06, 2012 6:46 pm

Appreciate the help guys, got some RE001s and an alignment to Lannys specs.

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: I need some tyre help

Postby manga_blue » Wed Jun 06, 2012 6:58 pm

RE001s should be good. You'll appreciate the grip and suppleness after those horrible S306s.
’95 NA8

UngernKhan
Learner Driver
Posts: 11
Joined: Tue Dec 20, 2011 4:59 pm
Vehicle: ND - 2
Location: Melbourne

Re: I need some tyre help

Postby UngernKhan » Wed Jun 06, 2012 9:02 pm

manga_blue wrote:RE001s should be good. You'll appreciate the grip and suppleness after those horrible S306s.

Grip will be nice haha!! The tread was so far gone that any hint of a hill and water meant spinning those horrible things

User avatar
lea
Driver
Posts: 61
Joined: Thu May 05, 2011 10:16 am
Vehicle: NA8
Location: Castle Hill, NSW, 2154

Re: I need some tyre help

Postby lea » Mon Jun 18, 2012 10:21 pm

manga_blue wrote:RE001s should be good. You'll appreciate the grip and suppleness after those horrible S306s.


I had RE001's on the car when I bought it. Loved them so much I replaced them with RE002's - great tyre, especially in the wet. I'd recommend these.

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: I need some tyre help

Postby Jeo » Tue Jun 19, 2012 11:40 am

You found a set of 14" RE001's? I thought they stopped making them.

How old are they?

UngernKhan
Learner Driver
Posts: 11
Joined: Tue Dec 20, 2011 4:59 pm
Vehicle: ND - 2
Location: Melbourne

Re: I need some tyre help

Postby UngernKhan » Tue Jun 19, 2012 4:16 pm

Jeo wrote:You found a set of 14" RE001's? I thought they stopped making them.

How old are they?

Well, the tyres are brand new but I don't know when they were produced.

Tyres and alignment are still great, after driving many hours in many conditions.

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: I need some tyre help

Postby Jeo » Tue Jun 19, 2012 4:34 pm

http://www.bridgestone.com.au/tyres/passenger/care/age.aspx

All tyres are produced with a serial Tyre Identification Number (or serial TIN) that shows the date of manufacture of a tyre (See Figure 1&2 below). The last three digits (for tyres made pre 2000) or four digits (for post 2000 tyres) of the serial TIN indicate the week and year that the tyre was made. For example, Figure 1 below shows a tyre made in the 37th week of 1995 and Figure 2 shows a tyre made in the 12th week of 2004. Also a tyre made in the 1990's can be distinguished from a tyre made in the 1980's due to a triangular indentation after the last number which is not present on 1980's tyres.

User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:

Re: I need some tyre help

Postby Guran » Tue Jun 19, 2012 6:04 pm

There's still plenty of stock of RE001 in 185/60R14 ...
viewtopic.php?f=30&t=52816

Bridgestone in May 2012 wrote:The Adrenalin RE001 pattern is currently being replaced by the Adrenalin RE002 pattern, however the majority of 60-series sizes are remaining as RE001. The 185/60R14 size is one of these sizes that will remain the RE001 pattern. Currently we have 198 units of the RE001 in the 185/60R14 size available in NSW warehousing and approx 450 units nationally.
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: I need some tyre help

Postby Jeo » Tue Jun 19, 2012 6:48 pm

I see, nice.

My supplier told me they had been discontinued but happy to see that they're not.


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 413 guests