Metalic clinking noise when turning left

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Kikuchi
Fast Driver
Posts: 343
Joined: Tue Sep 20, 2011 9:42 pm
Vehicle: ND - 2
Location: Adelaide

Metalic clinking noise when turning left

Postby Kikuchi » Wed May 09, 2012 12:41 pm

I've recently started getting a weird and often very audible sound coming from the rear, it's hard to pinpoint where as sometimes it straight down the centre above the boot, and sometimes it sounds like it's the wheel wells. It sounds like I had just run over gravel and it's bouncing up and hitting metal. I noticed it first when hard turning left mainly sweeping turns rather than the usual 90deg turns. During the turn there is not much noise, may be a bit, but right after the turn is when it's quite audible.

I've had a quick check, wheel nuts are tight, sway bars and the usual bolts around the suspension area are all tight. I've only done a real quick check on the left side as I was in a hurry when I checked it a few weeks back.

I've tried searching up google and on this forum, but I haven't been able to find anything. Most posts were about low speed (eg parking lot, driveway) noises, rather then under heavy turning. I will most likely take it to a mechanic anyway, but what I'm after is a rough idea of what could be wrong. If it's a the diff, then I'd be looking at getting an lsd while it's out etc.

My car is an nb8b '01, ~79,000km, slightly heavy rims (round 9-10kg i think), bc racing coilies. Tell me if you need more info.

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Metalic clinking noise when turning left

Postby manga_blue » Wed May 09, 2012 1:52 pm

Usually the exhaust hitting somewhere, most likely on rear suspension control arms or axles. If you turn left then the exhaust system will sway to the right. Get underneath and try swinging it about a bit.
’95 NA8

User avatar
Willstar
Fast Driver
Posts: 212
Joined: Tue Sep 20, 2011 8:31 pm
Vehicle: NB8B
Location: Mel-burn

Re: Metalic clinking noise when turning left

Postby Willstar » Wed May 09, 2012 1:59 pm

manga_blue wrote:Usually the exhaust hitting somewhere, most likely on rear suspension control arms or axles. If you turn left then the exhaust system will sway to the right. Get underneath and try swinging it about a bit.


*** When its cold.

I still have no thumb print to remind me of that one!

:roll:

Kikuchi
Fast Driver
Posts: 343
Joined: Tue Sep 20, 2011 9:42 pm
Vehicle: ND - 2
Location: Adelaide

Re: Metalic clinking noise when turning left

Postby Kikuchi » Wed May 09, 2012 2:47 pm

Funny you should mention that willstar. Just before posting this up, I jacked up the car and was going to move the exhaust around and then remembered it'll be hot as hell, so I dropped the car back down, I'll check it out later.

The thing is, the sound is very random, not recurring. Literally sounds like a whole bunch of gravel just went up the wheel well or the underside of the car.

samx5
Fast Driver
Posts: 172
Joined: Tue Feb 24, 2009 10:59 am
Vehicle: NB8A
Location: Radelaide SA

Re: Metalic clinking noise when turning left

Postby samx5 » Wed May 09, 2012 3:32 pm

Send me a PM if you need an opinion this afternoon Kikuchi, I could catch up with you to check it out.
Was: 1988 Corolla 4A-GE Twin Cam, 1991 Laser TX3, 1995 Peugeot 306 S16, 2003 Astra Sri Turbo, 2007 SP23 Lux
Now:1999 NB8A, 2011 Outlander VR-X

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Metalic clinking noise when turning left

Postby hks_kansei » Wed May 09, 2012 3:41 pm

Maybe a silly question.

You've got low offset wheels haven't you?

They aren't rubbing on something when the suspension's loaded are they?
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Kikuchi
Fast Driver
Posts: 343
Joined: Tue Sep 20, 2011 9:42 pm
Vehicle: ND - 2
Location: Adelaide

Re: Metalic clinking noise when turning left

Postby Kikuchi » Wed May 09, 2012 5:39 pm

wheels are 8" +20. i don't think they are rubbing, since it's actually not seriously low.
i don't have time this week, how about saturday samx5? i'm free after 130pm or sunday before 7pm

samx5
Fast Driver
Posts: 172
Joined: Tue Feb 24, 2009 10:59 am
Vehicle: NB8A
Location: Radelaide SA

Re: Metalic clinking noise when turning left

Postby samx5 » Wed May 09, 2012 7:11 pm

Will get back to you re: the weekend.
Was: 1988 Corolla 4A-GE Twin Cam, 1991 Laser TX3, 1995 Peugeot 306 S16, 2003 Astra Sri Turbo, 2007 SP23 Lux
Now:1999 NB8A, 2011 Outlander VR-X

vrmmmpshhh
Racing Driver
Posts: 533
Joined: Mon May 19, 2003 11:00 am
Vehicle: NA6
Location: Adelaide
Contact:

Metalic clinking noise when turning left

Postby vrmmmpshhh » Wed May 09, 2012 7:42 pm

After my nb brake upgrade I didn't bend the dust cover back far enough and the driver side was rubbing the disc when I turned. Maybe there is something stuck in your dust covers.

Kikuchi
Fast Driver
Posts: 343
Joined: Tue Sep 20, 2011 9:42 pm
Vehicle: ND - 2
Location: Adelaide

Re: Metalic clinking noise when turning left

Postby Kikuchi » Wed May 09, 2012 7:46 pm

that's possible, i'll give the covers a check later.

Shaun G
Learner Driver
Posts: 18
Joined: Sun Jun 20, 2010 11:35 pm

Metalic clinking noise when turning left

Postby Shaun G » Wed May 09, 2012 8:47 pm

Worth checking the wheel nuts. I had a single partially lose one that sounded like the car was falling apart....


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 64 guests