Dodgey exhaust jobs

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Apu
Speed Racer
Posts: 2399
Joined: Tue Apr 12, 2011 3:04 pm
Vehicle: NB8B
Location: North West, NSW

Re: Dodgey exhaust jobs

Postby Apu » Fri Apr 27, 2012 5:02 pm

I've got to do a plug for Mania here - I got my exhaust from them, and yes, a lot of people say they are expensive, etc etc. but what I have is a great bit of kit, love the sound, the welds are really really nice.

Sounds like a nag, but a lot of the time you get what you pay for.

My only complaint is there's a bit of buzzing in the muffler - a baffle has probably worked itself loose.

And before anyone starts going on about China made crap, I've had that happen in my brand-name-made-in-Germany exhausts as well.

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Re: Dodgey exhaust jobs

Postby Mr nanotech » Thu May 03, 2012 12:44 pm

Ok another update. In short, I'm F***ING PISSED OFF :x :x :x And no it's not fixed.... FFS what is wrong with people.

So I decided the hell with it, I'm taking it into a reputable and good shop in Geelong that has a great name here among the forum. I explained in graphic detail my dilemma, what needed to be done and apprehensiveness about exhaust jobs after all I've been through with this job. The job that should have been a quick fix.
After a while of talking I left it with him and made it bone clear that if anything were to go awry, CALL before doing ANYTHING.

Ok so the good news first. I got the call.

The bad news.... The really bad news.....

So it turns out that the last shop did SUCH a massacre of this unit that it's beyond saving now. The proprieter of the good place I'd dropped my car to today told me that my mx5 was currently still on the hoist and to come and have a look. So... I did.
Oh my god... Oh my F***ING God..... Having a look under the car myself with a jack is not the same as face to face on a hoist (captain obvious). But holy crap... I do not think I have seen welding this bad before. but it takes the cake. I'm pretty sure someone with palsy could have done a far better job than this.
For starters, every single weld has leaked. And yes, there are many leaks per weld. If you are wondering what I mean when I say 'every'; there are multiple points the exhaust has been cut up to put the cat back in and 'repair' the damage that had already done. The welds actually look like someone has super glued steel popcorn around the joins... And one join looks like they didn't even grind the pipes back first. They've cut along an already shocking weld and then welded over the bad welds at the end of either pipe to join them, creating this horrible looking thorny plant like 'weld' which has leaked heaps.
My awesome rare imported exhaust is now a heap of scrap metal, so I'd like to shout out a big "F*CK YOU" to the shop I sent it to the first time.
So pretty much all the piping has to be cut away now and redone from scratch just keeping the muffler and resonator sections as well as my cat.
All the piping.... How the hell do you ruin a job this bad?

I'll try to get pics up but right now I feel like crying, this is just bullshit. I'm on the virge of driving to the original shop and breaking some people's faces.
The real plan though, is to go back there and show them their shocking handiwork and FORCING them to fix it properly. One look at this system and you cannot deny it was welded by a retard.

So thanks to them, I'm still stuck with a broken setup. The new shop was fantastic but to do what they need to do to fix it, it's going to take a whole day. Even the hanger positions are messed up so it doesn't sit right. So yeah, it's a massive job.
Since it's basically worth nothing again, I'm looking at modding the exhaust significantly and changing it into something a little different now. But I'll see how I go with the old shop.

I'm trying to be professional and not name any names here, so I'm sorry if people get lost reading "this shop" vs 'that shop'.

I'm just really disappointed :( :( :(

EDIT- PICS UP

Image
^^ retard spec hanger.... Welded onto the bottom of the pipe and scrapes the road.
Image
Crappy phone pics I know but it shows what I mean. Looks waaaay worst in real life.
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

User avatar
Old Dude
Racing Driver
Posts: 1166
Joined: Tue Apr 07, 2009 8:06 pm
Vehicle: NB8B
Location: Gold Coast

Re: Dodgey exhaust jobs

Postby Old Dude » Thu May 03, 2012 1:09 pm

I can understand how angry you are......that exhaust would make a great Suppository for the owner of the original shop, Get as much documented/ picture info you can, get a quote from the good place and take them to the small claims court and get the bastards to pay for your new exhaust.
good luck with it

Cheers
Dale 8)
"Everybody dies......, but not everybody lives" ;-)

MX 5 2001 Grace Green
NB8B

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Re: Dodgey exhaust jobs

Postby Mr nanotech » Thu May 03, 2012 1:29 pm

That's a good idea but is it a long process to go through? I just want this over and done with and it's doing my head in. They destroyed something good so now I'm really cut up.
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

deviant
Racing Driver
Posts: 1717
Joined: Thu Apr 15, 2010 7:23 pm
Vehicle: NB8B
Location: Rockingham - Western Australia

Re: Dodgey exhaust jobs

Postby deviant » Thu May 03, 2012 2:20 pm

www.accc.gov.au

Call them.

I called them once when I needed some advice on demanding a refund on some work on a car I had and they were very helpful. They gave me enough information that I was able to draft a letter that got me what I wanted. Their advice is free.

They can probably advise what to do if the business does not play ball. They can also investigate said business and might be waiting for another complaint.

www.vcat.vic.gov.au for small claims. Something like $40 or $50 to lodge a claim. Obviously there will be other fees involved.

Personally I would happily spend as much as the exhaust costs to replace just on principle. Businesses like this keep operating because nobody ever complains or makes a noise. They belittle people in to backing down and accepting their shoddy service or going elsewhere and spending more money fixing their crap.

I think that you have to give the original business fair chance to fix the mistakes before going any further with a claim but ACCC could probably tell you more on that.

User avatar
username
Fast Driver
Posts: 288
Joined: Sun Apr 18, 2010 3:58 pm
Vehicle: NA6

Re: Dodgey exhaust jobs

Postby username » Thu May 03, 2012 2:38 pm

I can be a witness if this goes to court.

(fyi, i was with him when we took it in to get the st mays fitted. we both specially said 'it needs a flange on the end of the midpipe')
"signatures - a good place for a list of your cars modifications" -Jace

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Dodgey exhaust jobs

Postby hks_kansei » Thu May 03, 2012 3:01 pm

deviant wrote:I think that you have to give the original business fair chance to fix the mistakes before going any further with a claim but ACCC could probably tell you more on that.



He already has.

Took it there first and said "I want A and B done"
They did a bad job, but also didn't do what was asked, they did C
He took it back and said "I didn't ask for this? what is this!?" They said they had fixed it and did what was wanted.
Turns out the repair was worse than the original job.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
pcmx5
Racing Driver
Posts: 1648
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: ND - 2
Location: Geelong Vic.
Contact:

Re: Dodgey exhaust jobs

Postby pcmx5 » Thu May 03, 2012 4:45 pm

Josh,really feel for you.Sometimes there can be confusion about what the customer wants that leads to disputes but this is just terrible workmanship and makes you wonder if they are capable of repairing it!!

Basic consumer law is that a good or service must be fit for purpose and a leaking exhaust of that quality certainly doesn't fit that description.

Hope you have success with your action and at some time feel able to name these fools as we wouldn't want any forumites getting this " quality".

Peter.
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

Re: Dodgey exhaust jobs

Postby wozzah1975 » Thu May 03, 2012 6:08 pm

That is one of the worst jobs I've seen in a while, even from that joint. I'd be F%&king pissed as well.

Hope you get it sorted bud,

Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292

wiztek
Driver
Posts: 84
Joined: Mon Feb 20, 2012 9:31 pm

Re: Dodgey exhaust jobs

Postby wiztek » Thu May 03, 2012 7:57 pm

That looks shocking.
Hope it works out for you mate.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Dodgey exhaust jobs

Postby Mr Morlock » Thu May 03, 2012 8:15 pm

If you have a prob then you need to take action as a consumer. 774 in Melb often touch on these matters and you can ring for advice - Tuesdays I think - listen for the Perry Mason theme- the small claims tribunal now has a different name. No point in anyone cursing about it- we at least have consumer rights and Govts that have put these things in place.

Jace
Racing Driver
Posts: 661
Joined: Fri Oct 24, 2008 7:47 pm
Vehicle: NA6
Location: Geelong

Re: Dodgey exhaust jobs

Postby Jace » Thu May 03, 2012 10:54 pm

not naming names is probably good for your case against them too.
blows that the exhaust is now ruined seeing as how it was a rare and unique part!

forgive me for being 10-70 years younger than you but who or what is perry mason?! :|

Kikuchi
Fast Driver
Posts: 343
Joined: Tue Sep 20, 2011 9:42 pm
Vehicle: ND - 2
Location: Adelaide

Re: Dodgey exhaust jobs

Postby Kikuchi » Thu May 03, 2012 11:16 pm

That really is poor work. I think a monkey could have done better.

ACCC will probably be the best bet, although it might take a while. What you can do is call them up for the advice, go back to the store and tell them the advice you'd just learned. If they don't play ball pursue it with ACCC, they can launch an investigation, and in the end the business will be on their knees.

When i had my exhaust done on my previous car, there was a problem with their job, went back to get it fixed. It was fixed, but then find there was used chewing gum stuck on my protein shaker. Petty creatures.

RJ45
Fast Driver
Posts: 107
Joined: Wed Feb 16, 2011 5:55 pm
Vehicle: NB8B
Location: Lane Cove

Re: Dodgey exhaust jobs

Postby RJ45 » Fri May 04, 2012 1:09 am

I'm getting angry just reading about this!

You'd think that after one stuff up you'd chain the retard out back while the A-team get the job done right, to avoid a 3rd visit.
I know you're anxious to just get it sorted so you can just drive, but do you really trust them to not stuff up, again?

I'd be inclined to just pay another hopefully good place to fix it properly, then make claim via SCT for the cost.
Get some proper advice first, but I guess if you take high res pics before getting it fixed & possibly save some of the really bad parts for show'n'tell a claim might be easy.


Jace wrote:forgive me for being 10-70 years younger than you but who or what is perry mason?! :|

TV series about a Lawyer in 50's/60's, possibly the first such show.
NB8C+PSS9

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Dodgey exhaust jobs

Postby NitroDann » Fri May 04, 2012 1:20 am

Isnt it a T & C exhaust? Can you not have TnC build a replacement?

I honestly dont think the authorities will care much for an exhaust, I think personal negotiation will be easier.

Good luck with it.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 99 guests