SE.. how would you get some blow off flutter.
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
Aussie Stig
- Stig
- Posts: 540
- Joined: Wed Aug 10, 2011 9:14 pm
Re: SE.. how would you get some blow off flutter.
When I was in Sydney I think it was "the wall" where you could get this.
It is a known fact that 50% of people are of less than average intelligence
-
Boyracer
- MX-5 Encyclopedia
- Posts: 2568
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NC
- Location: Silverdale.NSW
- Contact:
Re: SE.. how would you get some blow off flutter.
I used the Turbsmart Kompact, plum back with atmo, it's a direct swap and works well not too loud.
NC Roadie, NC Racey, ND Racey….and a 30AE
Plus several others in the bone yard...
Plus several others in the bone yard...
-
NMX516
- Speed Racer
- Posts: 2057
- Joined: Mon Jun 19, 2006 12:05 pm
- Vehicle: NB SP
- Location: Brisbane
Re: SE.. how would you get some blow off flutter.
If you want turbo flutter, remove the BOV altogether and plug the holes which remain. If you want it even louder, get an aftermarket ecu which doesn't use an air flow meter (so you lose the afm) and put a pod filter on the mouth of the turbo.
As an experiment to see if you like, just remove the vacuum line to the BOV and fold the end back on itself to prevent it leaking air, and go for a drive!
As an experiment to see if you like, just remove the vacuum line to the BOV and fold the end back on itself to prevent it leaking air, and go for a drive!
Pain is temporary, quitting lasts forever.
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 80 guests
