Dodgey exhaust jobs
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Dodgey exhaust jobs
If you can, make sure to get quotes in writing.
That way they can't come back and say "oh, you just said a high price to ƒü¢k us over"
That way they can't come back and say "oh, you just said a high price to ƒü¢k us over"
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Dodgey exhaust jobs
It was covered earlier- you might have a show at a small claims tribunal but sorting it out directwith the business is the best approach-not sure how long sct's takes. I would be amazed if the Police would take any role at all.
-
- Driver
- Posts: 45
- Joined: Sat Dec 18, 2010 1:45 pm
- Vehicle: NB8A
Re: Dodgey exhaust jobs
mitch_f1 wrote:I took my car to probably the most popular exhaust place in Sydney to get the mid pipe extended by 1". Came back, and the car had like 20km on it, and the engine was making noises. After a long discussion it was determined that no-one in the shop drove it (wrote down odo before I left), and that the noise was always there (first time I ever heard it). Also car was left outside (evidenced by rain marks from overnight rain). I hate leaving my car with other people.
^This.. I had a ke70 corolla with 4age conversion and all the good bits, got it ready for roady dropped it off at the place with a full tank at 8am thought it shouldnt take more than 2 hours.. Never got a call so i called them at 12 and they said they were doing it now appart from the fact i saw it on the hoist in the air at 8:30am.. At 5:30pm i finally get a call saying the car is done but it failed, i go to pick it up and it had less than a quarter of a tank of fuel and a week later my head gasket blew and i never overheated it.. Ever since this i have been very, very careful with who i leave my car with so they dont destroy it..
- Mr nanotech
- Racing Driver
- Posts: 1487
- Joined: Sat Jan 23, 2010 4:35 pm
- Vehicle: NA6
- Location: Rotting away in the 'Greater' City of Geelong...
- Contact:
Re: Dodgey exhaust jobs
All done. I took it back there at opening hour and they put it straight on the hoist and I told them what to do while I watched the whole job from start to finish. From now on I think I will just stay and watch in future. It's the only fool proof way to make sure you get what you pay for.
They were really good at fixing their mistake and I'm no more out of pocket as well. All done and dusted. It's really refreshing to see a business actually admit fault (even though they insisted it was me initially) and fix the mistakes they made.
They were really good at fixing their mistake and I'm no more out of pocket as well. All done and dusted. It's really refreshing to see a business actually admit fault (even though they insisted it was me initially) and fix the mistakes they made.
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons.
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Dodgey exhaust jobs
AWESOME!!!
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Racing Driver
- Posts: 661
- Joined: Fri Oct 24, 2008 7:47 pm
- Vehicle: NA6
- Location: Geelong
Re: Dodgey exhaust jobs
rad, i get the feeling they weren't exactly rude about it.
every time i've dealt with those guys for smaller things like gaskets and hangers they just give it to me for nothing.
every time i've dealt with those guys for smaller things like gaskets and hangers they just give it to me for nothing.
- Mr nanotech
- Racing Driver
- Posts: 1487
- Joined: Sat Jan 23, 2010 4:35 pm
- Vehicle: NA6
- Location: Rotting away in the 'Greater' City of Geelong...
- Contact:
Re: Dodgey exhaust jobs
Yeah they were tools on the phone but in person they were really nice and helpful. Guess the lesson is to just go in face to face first.
Also as a bonus, this thing went from being drony and loud to an awesome quiet tone with no drone just like the TnC muffler!!!!! I can't believe the difference the cat makes. Plus no more petrol smell is always a good thing.
Also as a bonus, this thing went from being drony and loud to an awesome quiet tone with no drone just like the TnC muffler!!!!! I can't believe the difference the cat makes. Plus no more petrol smell is always a good thing.
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons.
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Dodgey exhaust jobs
Also, it stops the hippies crying.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Mr nanotech
- Racing Driver
- Posts: 1487
- Joined: Sat Jan 23, 2010 4:35 pm
- Vehicle: NA6
- Location: Rotting away in the 'Greater' City of Geelong...
- Contact:
Re: Dodgey exhaust jobs
Should have left it out
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons.
- TieNN89
- Speed Racer
- Posts: 2012
- Joined: Mon Nov 26, 2007 8:27 pm
- Vehicle: NC
- Location: Brisbane
- Contact:
Re: Dodgey exhaust jobs
That's good to hear they fixed it with no issues. But they really should of done as you requested originally.
I reckon they left your job to the last and then rushed it.
Grhhh I hate people who do that to me But I can also see the other picture and see why people do it but it still annoys the living hell out of me
I reckon they left your job to the last and then rushed it.
Mr nanotech wrote:From now on I think I will just stay and watch in future. It's the only fool proof way to make sure you get what you pay for.
Grhhh I hate people who do that to me But I can also see the other picture and see why people do it but it still annoys the living hell out of me
-
- Fast Driver
- Posts: 338
- Joined: Tue Dec 16, 2003 11:43 pm
- Vehicle: NA6 - Turbo
- Location: Sydney
Re: Dodgey exhaust jobs
Good to hear you got it sorted,
http://www.facebook.com/purefabcustom
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
- Mr nanotech
- Racing Driver
- Posts: 1487
- Joined: Sat Jan 23, 2010 4:35 pm
- Vehicle: NA6
- Location: Rotting away in the 'Greater' City of Geelong...
- Contact:
Re: Dodgey exhaust jobs
So... Turns out it's not fixed
Welds split on one of the new hangers I had put on!!!!! Now it sways like nobodies business and has to be fixed. I know I should just go back and make them fix it but I've had it with those guys... I've booked it into another shop now and letting them fix it for me.
I've decided I'd rather pay and have someone fix it right the first time instead of having to drive back and forth everyday finding out something else is wrong.
Oh and I noticed that they cut another one of the new hangers too long. It's on the midpipe and is on an angle. Basically, one end goes to the hanger bush bit on the car, the other end sits out towards the road maybe 20mm lower than the resonator and drags on every speed bump.
My car is about 110mm-115mm to pinchweld so it's not exactly that low!!!!!!!!!!!!!!!
So hopefully tomorrow is the last time this thing gets fixed. Never had such a headache over such a simple job. I seriously wish I knew how to weld, I'd rather do this myself....
Welds split on one of the new hangers I had put on!!!!! Now it sways like nobodies business and has to be fixed. I know I should just go back and make them fix it but I've had it with those guys... I've booked it into another shop now and letting them fix it for me.
I've decided I'd rather pay and have someone fix it right the first time instead of having to drive back and forth everyday finding out something else is wrong.
Oh and I noticed that they cut another one of the new hangers too long. It's on the midpipe and is on an angle. Basically, one end goes to the hanger bush bit on the car, the other end sits out towards the road maybe 20mm lower than the resonator and drags on every speed bump.
My car is about 110mm-115mm to pinchweld so it's not exactly that low!!!!!!!!!!!!!!!
So hopefully tomorrow is the last time this thing gets fixed. Never had such a headache over such a simple job. I seriously wish I knew how to weld, I'd rather do this myself....
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Dodgey exhaust jobs
Now you know how I felt.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Driver
- Posts: 79
- Joined: Fri Mar 11, 2011 1:24 am
Re: Dodgey exhaust jobs
Wow now I realise how lucky I am with my local exhaust shop.
taken my mx5 to them twice to get odd exhaust work done and both times the work has been great exactly what I asked for and cheap to boot.
they werent even fussed when I came with my own cat.
taken my mx5 to them twice to get odd exhaust work done and both times the work has been great exactly what I asked for and cheap to boot.
they werent even fussed when I came with my own cat.
- JRBasia
- Fast Driver
- Posts: 166
- Joined: Fri Nov 18, 2011 12:52 pm
- Vehicle: NA6
- Location: Melbourne, Victoria
Re: Dodgey exhaust jobs
It's amazing how we have to lucky just to get the services we require! I have been blessed with fantastic service for whatever I need done. I also do my research before I go ahead with things like this, but it shouldn't be pick and pray affair...
Hope your exhaust is done and dusted and never again have shoddy jobs done, whatever the car may be
Hope your exhaust is done and dusted and never again have shoddy jobs done, whatever the car may be
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 104 guests