MX5 supercharger kit information
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
MX5 supercharger kit information
that's a high indicated boost for just the smaller SC pulley - are you running standard JRSC belt tensioner or the Track Dog or similar modified SC belt tensioner?
good result though - look forward to the pics.
good result though - look forward to the pics.
-
- Driver
- Posts: 30
- Joined: Sat May 10, 2008 11:07 am
- Vehicle: ND - 2 GT
- Location: gold coast
MX5 supercharger kit information
I understand the boost figure looks high , but that is at at close to 8000rpm [ frighting to be in the dyno room at those revs and the supercharger on full song
but will post more soon as i get it back and re run it on the dyno with the
new gears.
I think this thread should move when I do so ?
Agent Orange
but will post more soon as i get it back and re run it on the dyno with the
new gears.
I think this thread should move when I do so ?
Agent Orange
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
MX5 supercharger kit information
Agent Orange wrote:I think this thread should move when I do so ?
yeah, you could repost with photos here:
viewtopic.php?f=81&t=33947&start=45
Re: MX5 supercharger kit information
Hi Ive owned several MX5s and never thought of supercharging till now. Yeah I know!! Ive read a article on the Cosworth Supercharger and it sounds great, although expensive can anyone advise a novice to supercharging Im looking to buy a softtop 2009-10 model.
- kenson
- Fast Driver
- Posts: 268
- Joined: Fri Oct 19, 2007 10:55 pm
- Vehicle: NB SE
- Location: Perth
Re: MX5 supercharger kit information
Hi everyone,
I've been umming and ahhing for a long time now. I now have the funds to go ahead but want to do it right and will not rush things
At the moment I'm leaning towards the Rotrex (Bulletcars) solution and the other option I'll consider is the FFS package
I'm not here for max power but I'd be happy with around 130 kW atw
Now I own a 2001 model with vvt and currently I'm sitting at approximately 60 000 km's
Would it be a good idea to do the 100 000 km service at the same time?
Anyone recommend any installers in Perth?
Finally, anyone have any experience in Perth?
Looks like I'll be spending around $8000 (6000 for kit, 1000 for install, 1000 for major service). Is that a good estimate?
I've been umming and ahhing for a long time now. I now have the funds to go ahead but want to do it right and will not rush things
At the moment I'm leaning towards the Rotrex (Bulletcars) solution and the other option I'll consider is the FFS package
I'm not here for max power but I'd be happy with around 130 kW atw
Now I own a 2001 model with vvt and currently I'm sitting at approximately 60 000 km's
Would it be a good idea to do the 100 000 km service at the same time?
Anyone recommend any installers in Perth?
Finally, anyone have any experience in Perth?
Looks like I'll be spending around $8000 (6000 for kit, 1000 for install, 1000 for major service). Is that a good estimate?
- Robert
- Fast Driver
- Posts: 190
- Joined: Fri Jan 15, 2010 3:19 pm
- Vehicle: NC
- Location: Naremburn NSW
- Contact:
Re: MX5 supercharger kit information
I am also considering to go down this path , of a supercharger install.
Love the install of the unit in the NC. So simple and ticks all the boxs for performance gain and reliabilty
Just a couple questions. ( Il do some research tomorrow ) just interested if any one knows.
Are the insurance companies savage with the increase of their rates due to the install of SC.
What is required for the RTA. do they need to be notified and what sort of fees.
Any other fees and or costs apart from the engineer cert. and install labour.
Love the install of the unit in the NC. So simple and ticks all the boxs for performance gain and reliabilty
Just a couple questions. ( Il do some research tomorrow ) just interested if any one knows.
Are the insurance companies savage with the increase of their rates due to the install of SC.
What is required for the RTA. do they need to be notified and what sort of fees.
Any other fees and or costs apart from the engineer cert. and install labour.
NC 2 Metro Grey
always searching for the god shot
always searching for the god shot
- Black_Penguin
- Racing Driver
- Posts: 726
- Joined: Thu Jun 03, 2010 5:30 pm
- Vehicle: NB8A
- Location: Ulladulla, South Coast NSW
Re: MX5 supercharger kit information
You would need a engineers report to certify that the installation is safe and the car still meets emissions regs, this would the the minimum required. Talk to an engineer and see what they would like you to do.
Link to approved certifiers http://www.rta.nsw.gov.au/registration/downloads/vsccs.html
Link to approved certifiers http://www.rta.nsw.gov.au/registration/downloads/vsccs.html
My Garage Thread WP 1:16.1 SMSP South 1:10.0 WSID 15.6
- Tony
- Racing Driver
- Posts: 510
- Joined: Sun Apr 11, 2010 6:52 pm
- Vehicle: NC
- Location: Bathurst, NSW
Re: MX5 supercharger kit information
Robert,
I'm currently researching a supercharger install in my NB8A and spoke to a local engineer/signatory here in Bathurst.
For the NB8A he reckons it's a piece of cake because there are already two "factory" versions of forced induction NB's and these effectively set the engineering standard. It won't help you with an NC though.
All he suggested I upgrade was the brakes to the NB8B/SE standard. I asked about emissions testing and he said it's a standard four gas test (what ever that is) and I believe it can be done in his workshop.
A ballpark cost for certification for my NB was around $1000.
It almost sounds too good to be true, so I'm continuing with my research to double check. I'll probably talk with another engineer and see if I get a similar story.
I hope that helps...
I'm currently researching a supercharger install in my NB8A and spoke to a local engineer/signatory here in Bathurst.
For the NB8A he reckons it's a piece of cake because there are already two "factory" versions of forced induction NB's and these effectively set the engineering standard. It won't help you with an NC though.
All he suggested I upgrade was the brakes to the NB8B/SE standard. I asked about emissions testing and he said it's a standard four gas test (what ever that is) and I believe it can be done in his workshop.
A ballpark cost for certification for my NB was around $1000.
It almost sounds too good to be true, so I'm continuing with my research to double check. I'll probably talk with another engineer and see if I get a similar story.
I hope that helps...
'09 NC2
-
- Driver
- Posts: 80
- Joined: Mon Jun 13, 2011 12:26 pm
Re: MX5 supercharger kit information
Deckspeed Racing completed a NC Supercharger install today and it produced 160.5 KW at the rear wheels,power came on smooth through the whole rev range. Used Dynotronics latested supercharger reflash in the ECU. The Supercharger can develope 190KW for the track with a different tune.
Installing another Supercharger next week. The happy owner will be posting the Dyno results.
Installing another Supercharger next week. The happy owner will be posting the Dyno results.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: MX5 supercharger kit information
Tony wrote:Robert,
I'm currently researching a supercharger install in my NB8A and spoke to a local engineer/signatory here in Bathurst.
For the NB8A he reckons it's a piece of cake because there are already two "factory" versions of forced induction NB's and these effectively set the engineering standard. It won't help you with an NC though.
All he suggested I upgrade was the brakes to the NB8B/SE standard. I asked about emissions testing and he said it's a standard four gas test (what ever that is) and I believe it can be done in his workshop.
A ballpark cost for certification for my NB was around $1000.
It almost sounds too good to be true, so I'm continuing with my research to double check. I'll probably talk with another engineer and see if I get a similar story.
I hope that helps...
This is all true and fantastic on the new system, on top of that if another car with the same mods has been tested and passed, so will yours, no BS, it just passes based on previous standards.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Fast Driver
- Posts: 233
- Joined: Sun Jun 06, 2010 12:20 pm
- Location: Sydney
Re: MX5 supercharger kit information
hall6463 wrote:Deckspeed Racing completed a NC Supercharger install today and it produced 160.5 KW at the rear wheels,power came on smooth through the whole rev range. Used Dynotronics latested supercharger reflash in the ECU. The Supercharger can develope 190KW for the track with a different tune.
Installing another Supercharger next week. The happy owner will be posting the Dyno results.
Here's the dyno.
And here's the SC:
Beautiful work!
Once this rain stops, I'll post some impressions in my garage thread.
- neilhr
- Fast Driver
- Posts: 483
- Joined: Wed Jul 27, 2011 8:30 pm
- Vehicle: NC - Supercharged
- Location: North-West Sydney
- Contact:
Re: MX5 supercharger kit information
Zohxoco wrote:hall6463 wrote:Deckspeed Racing completed a NC Supercharger install today and it produced 160.5 KW at the rear wheels,power came on smooth through the whole rev range. Used Dynotronics latested supercharger reflash in the ECU. The Supercharger can develope 190KW for the track with a different tune.
Installing another Supercharger next week. The happy owner will be posting the Dyno results.
Here's the dyno.
And here's the SC:
Beautiful work!
Once this rain stops, I'll post some impressions in my garage thread.
That is such an excellent result Tim! I am actually getting mine done next week with Deckspeed
-
- Fast Driver
- Posts: 310
- Joined: Tue Jul 13, 2010 10:26 pm
- Vehicle: NC
- Location: Northern Sydney
Re: MX5 supercharger kit information
Can the same hardware with a different tune develop an additional 30rwkw? Is this not suitable for daily driving?
Kris's NC
viewtopic.php?f=57&t=43276
viewtopic.php?f=57&t=43276
-
- Fast Driver
- Posts: 233
- Joined: Sun Jun 06, 2010 12:20 pm
- Location: Sydney
Re: MX5 supercharger kit information
The way the SC fits so well to the car, it looks almost stock, and the transparency of it in normal driving really makes this mod something that is a "smart" upgrade. And with the right tune, and the right knowhow there's obviously plenty of potential
- neilhr
- Fast Driver
- Posts: 483
- Joined: Wed Jul 27, 2011 8:30 pm
- Vehicle: NC - Supercharged
- Location: North-West Sydney
- Contact:
Re: MX5 supercharger kit information
kris wrote:Can the same hardware with a different tune develop an additional 30rwkw? Is this not suitable for daily driving?
I also am curious of this, why is the 190kw tune for track only?
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 245 guests