Hey does anybody have this blue connector behind their popup lights? From memory it's on the wires leading to the lights. It's probably almost an inch long. Just wondering what it is.
Blue connector behind NA headlight assembly
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Racing Driver
- Posts: 706
- Joined: Wed Jun 22, 2011 10:08 pm
- Vehicle: NA8
- Location: Blakehurst NSW
-
- Fast Driver
- Posts: 296
- Joined: Tue Aug 23, 2011 12:31 am
- Vehicle: NA6
- Location: Sydney
Re: Blue connector behind NA headlight assembly
that your 12v, its can be used to power your timing light.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Blue connector behind NA headlight assembly
Electric water pump and EBC are common uses for it.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- Russellb
- RIP Nov 2014
- Posts: 692
- Joined: Sat Aug 13, 2005 9:22 pm
- Vehicle: Clubman
- Location: Harden NSW
- Contact:
Re: Blue connector behind NA headlight assembly
NitroDann wrote:Electric water pump and EBC are common uses for it.
Dann
May be common uses on a modified car? but Koop21 is right
koop21 wrote:that your 12v, its used to power your timing light.
My ClubmanRebuild
MX5 Solution Canberra ( aka carco )http://www.carco.com.au
Russell's Race and Rally Service
MX5 SE Rally car is HERE
MX5 Solution Canberra ( aka carco )http://www.carco.com.au
Russell's Race and Rally Service
MX5 SE Rally car is HERE
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Blue connector behind NA headlight assembly
Why wouldn't one clip the alligators straight to the alternator, seems easier than making a plug after finding that connector?
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Racing Driver
- Posts: 706
- Joined: Wed Jun 22, 2011 10:08 pm
- Vehicle: NA8
- Location: Blakehurst NSW
Re: Blue connector behind NA headlight assembly
Yeah sweet, so are you supposed to make the connector as it has both male and female plug ends? Is that the intention of it?
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Blue connector behind NA headlight assembly
From memory last time I used it for timing light attached positive of timing light to male connector & earthed negative of timing light somewhere else appropriate.
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Blue connector behind NA headlight assembly
not familiar with the NA set up but possibly someone has added a 2 pin connector- it would not surprise if it has 2 blade terminals positions - which in turn can be connected to a mating 2 pin plug for perhaps an accessory? You can check to see if the terminal(s) are live when lights off , parkers on, headlights on etc. These connectors are of course a very elegant way to make connections.
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Blue connector behind NA headlight assembly
I don't know that plug specifically, but there are a few empty plugs around the headlights on NAs.
I know one of them is for the optional foglights.
I know one of them is for the optional foglights.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Re: Blue connector behind NA headlight assembly
hks_kansei wrote:I don't know that plug specifically, but there are a few empty plugs around the headlights on NAs.
Just so I can build up my post count to keep up with Mr. "the-dog-goes-woof, the-cat-goes-meow, I-have-nothing-constructive-to-add-but-I-will-post-something-anyway" Morlock;
Probably some blanks for NA6 and/or Eunos Roadsters, none on my old NA8 that I can recall.
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: Blue connector behind NA headlight assembly
12 volt source, its in all na variants from factory. Used for power for diagnostics proposes. Not high current supply so not recommended for long term supply of thirsty equipment.
Sent from my GT-I9100 using Tapatalk
Sent from my GT-I9100 using Tapatalk
-
- Racing Driver
- Posts: 661
- Joined: Fri Oct 24, 2008 7:47 pm
- Vehicle: NA6
- Location: Geelong
Re: Blue connector behind NA headlight assembly
power source for one of these (factory timing light as mentioned)?
take your pick. (sorry for the massive picture!)
take your pick. (sorry for the massive picture!)
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 34 guests