Blue connector behind NA headlight assembly

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

marty085
Racing Driver
Posts: 706
Joined: Wed Jun 22, 2011 10:08 pm
Vehicle: NA8
Location: Blakehurst NSW

Blue connector behind NA headlight assembly

Postby marty085 » Thu Apr 05, 2012 7:34 pm

Hey does anybody have this blue connector behind their popup lights? From memory it's on the wires leading to the lights. It's probably almost an inch long. Just wondering what it is.
Image

koop21
Fast Driver
Posts: 296
Joined: Tue Aug 23, 2011 12:31 am
Vehicle: NA6
Location: Sydney

Re: Blue connector behind NA headlight assembly

Postby koop21 » Thu Apr 05, 2012 8:31 pm

that your 12v, its can be used to power your timing light.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Blue connector behind NA headlight assembly

Postby NitroDann » Thu Apr 05, 2012 8:40 pm

Electric water pump and EBC are common uses for it.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
Russellb
RIP Nov 2014
Posts: 692
Joined: Sat Aug 13, 2005 9:22 pm
Vehicle: Clubman
Location: Harden NSW
Contact:

Re: Blue connector behind NA headlight assembly

Postby Russellb » Thu Apr 05, 2012 9:16 pm

NitroDann wrote:Electric water pump and EBC are common uses for it.

Dann


May be common uses on a modified car? but Koop21 is right

koop21 wrote:that your 12v, its used to power your timing light.
My ClubmanRebuild
MX5 Solution Canberra ( aka carco )http://www.carco.com.au
Russell's Race and Rally Service
MX5 SE Rally car is HERE :)

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Blue connector behind NA headlight assembly

Postby NitroDann » Thu Apr 05, 2012 9:22 pm

Why wouldn't one clip the alligators straight to the alternator, seems easier than making a plug after finding that connector?

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

marty085
Racing Driver
Posts: 706
Joined: Wed Jun 22, 2011 10:08 pm
Vehicle: NA8
Location: Blakehurst NSW

Re: Blue connector behind NA headlight assembly

Postby marty085 » Thu Apr 05, 2012 11:12 pm

Yeah sweet, so are you supposed to make the connector as it has both male and female plug ends? Is that the intention of it?

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Blue connector behind NA headlight assembly

Postby 93_Clubman » Sat Apr 07, 2012 12:17 pm

From memory last time I used it for timing light attached positive of timing light to male connector & earthed negative of timing light somewhere else appropriate.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Blue connector behind NA headlight assembly

Postby Mr Morlock » Sat Apr 07, 2012 5:03 pm

not familiar with the NA set up but possibly someone has added a 2 pin connector- it would not surprise if it has 2 blade terminals positions - which in turn can be connected to a mating 2 pin plug for perhaps an accessory? You can check to see if the terminal(s) are live when lights off , parkers on, headlights on etc. These connectors are of course a very elegant way to make connections.

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Blue connector behind NA headlight assembly

Postby hks_kansei » Sun Apr 08, 2012 8:30 am

I don't know that plug specifically, but there are a few empty plugs around the headlights on NAs.
I know one of them is for the optional foglights.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
Steampunk
Speed Racer
Posts: 4670
Joined: Wed Oct 10, 2007 9:16 am
Vehicle: NA6
Location: Southside of Breeze-bane

Re: Blue connector behind NA headlight assembly

Postby Steampunk » Sun Apr 08, 2012 1:26 pm

hks_kansei wrote:I don't know that plug specifically, but there are a few empty plugs around the headlights on NAs.

Just so I can build up my post count to keep up with Mr. "the-dog-goes-woof, the-cat-goes-meow, I-have-nothing-constructive-to-add-but-I-will-post-something-anyway" Morlock;

Probably some blanks for NA6 and/or Eunos Roadsters, none on my old NA8 that I can recall.
Image

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Blue connector behind NA headlight assembly

Postby sailaholic » Sun Apr 08, 2012 9:36 pm

12 volt source, its in all na variants from factory. Used for power for diagnostics proposes. Not high current supply so not recommended for long term supply of thirsty equipment.

Sent from my GT-I9100 using Tapatalk

Jace
Racing Driver
Posts: 661
Joined: Fri Oct 24, 2008 7:47 pm
Vehicle: NA6
Location: Geelong

Re: Blue connector behind NA headlight assembly

Postby Jace » Mon Apr 09, 2012 9:13 pm

power source for one of these (factory timing light as mentioned)?
take your pick. (sorry for the massive picture!)

Image


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 45 guests