Tempe Tyres

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
bruce
Speed Racer
Posts: 7708
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Tempe Tyres

Postby bruce » Fri Mar 30, 2012 12:49 pm

Can you imagine how hard it would be to do a decent copy of a tire? You'd have to copy all the side markings, the tread, and make it look convincing.
After all that I doubt it would be much cheaper to produce.

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Tempe Tyres

Postby Magpie » Fri Mar 30, 2012 11:34 pm

Out of interest the Trade Practices Act 1974 (TPA) no longer exists, it has been replaced by the Competition and Consumer Act 2010 (CCA) of which Schedule 2 is the Australian Consumer Law (ACL). The ACL replaced the TPA. Section 18 of the ACL is the equivalent to Section 52 of the TPA, that is misleading or deceptive conduct.

Section 18 can not be excluded from any purchase and importantly business is responsible for how its goods and services are perceived by the consumer and can not blame the consumer for their own lack of due diligence. I would suggest getting on the ACCC website possibly contacting them with regard to what has happened. Another way would be to inform the company who owns the trademark to the copies you have and let them know as they may take action under S 18 as well.

Note I have take all care but will accept no responsibility for the contents of this post :)

User avatar
greenMachine
Forum Guru
Posts: 4054
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: Tempe Tyres

Postby greenMachine » Sat Mar 31, 2012 9:28 am

Those, or similar, wheels have been around for ages. That suggests the different, though similar, names are not so close as to be actionable, and the advert did not misrepresent the wheels. Money spent on lawyers will be fruitess, unless you count getting legal advice on why you were not ripped off, in law anyway.

Caveat emptor. If it looks too good to be true, it probably is.

At least they look like the real thing.

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )

User avatar
bootz
Racing Driver
Posts: 887
Joined: Thu Aug 19, 2010 1:13 pm
Vehicle: NB8B
Location: The Wild Wild West

Re: Tempe Tyres

Postby bootz » Sat Mar 31, 2012 3:04 pm

Ravs/Vork, you gotta laugh.

Do they do a nice copy of Ce28n? I might even be tempted.
Bootz and Boof - On the road to somewhere.

User avatar
bear2230
Racing Driver
Posts: 1627
Joined: Thu Jul 01, 2010 11:43 pm
Vehicle: NB SP
Location: Sydney South, God's country.
Contact:

Re: Tempe Tyres

Postby bear2230 » Mon Apr 02, 2012 12:08 am

Tempe quoted me $275.00 per tyre for 215 x 45 x 18 Potenza's ROE50A for the Liberty GTB. RRP on these tyres are $360.00+
I have a friend that runs TyrePower near my place and his buy price for these from Bridgestone Australian is $268.00 each
They do indeed sell parallel tyres and where they source them from is anybody's guess.
Are they the same quality? Maybe yes, maybe no. I honestly don't know. What I do know is that if I am going to spend that much money I damn well want then real deal. I drive my family around in that car.
I ending up paying $295.00 each from TyrePower.
If nothing else they are a good bargaining chip to get a reasonable price on tyres from other dealers.

Richard.
Image
Scooby - Silver SP - Build # 53
Snowie - White NB project car. Engineered and registered :)
Vader - Hilux & Gretel the black German Bitch

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Tempe Tyres

Postby project.r.racing » Mon Apr 02, 2012 8:54 am

bear2230 wrote:They do indeed sell parallel tyres and where they source them from is anybody's guess.
In your case Richard, they would have sourced the tyres you where looking at from Bridgestone. There are 2 ways tyres get into the country:-

1) Place of Manufacturer > Ship > Tempe Tyres
2) Place of Manufacturer > Ship > Australian distributer > Transport > State distributer > Transport > Tyre Shop

If each of those hands that a tyre passes wants to make his 10% (example figure) cut, you can see which one will get more expensive by the time the consumer finally buys said products.

bear2230 wrote:I ending up paying $295.00 each from TyrePower.
That is not bad considering that that TypePower then only made 20 cents per tyre after GST.

User avatar
bear2230
Racing Driver
Posts: 1627
Joined: Thu Jul 01, 2010 11:43 pm
Vehicle: NB SP
Location: Sydney South, God's country.
Contact:

Re: Tempe Tyres

Postby bear2230 » Mon Apr 02, 2012 9:25 am

OK, fair enough.
I'm pretty sure his price included GST in his buy price so $108.00 profit which is still a good deal for me.
They did however do a wheel alignment for $45.00 which I didn't ask for. So they got me there a little bit as well.
Swings and roundabouts.
Image
Scooby - Silver SP - Build # 53
Snowie - White NB project car. Engineered and registered :)
Vader - Hilux & Gretel the black German Bitch

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Tempe Tyres

Postby project.r.racing » Mon Apr 02, 2012 9:36 am

Yeah buy price is with GST sorry. I recently brought some Kumhos for my 3 from the local tyre shop as it worked out a little cheaper than Tempe once shippi9ng and fitting was added to the equation. His buy price was $122 inc GST, and sold them for $132 to me. Plus $55 for an alignment.

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Re: Tempe Tyres

Postby sliq » Tue Apr 03, 2012 12:55 pm

kayye wrote:I've already come to terms with the fact that its probably a replica, but what can you do... :frown:

just hoping that it doesn't interfere with the handling too much...


they might have adjustable offset
i can't brain today.. i have the dumb..

User avatar
greenMachine
Forum Guru
Posts: 4054
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: Tempe Tyres

Postby greenMachine » Tue Apr 03, 2012 1:01 pm

sliq wrote:
kayye wrote:I've already come to terms with the fact that its probably a replica, but what can you do... :frown:

just hoping that it doesn't interfere with the handling too much...


they might have adjustable offset


I doubt they would be dangerous, or necessarily weak - I have not heard of any horror stories, but then I haven't tested my google-fu on this question. However they will certainly be heavier than a Rays, and the general quality will probably be lower.

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 341 guests