Possible flat spot
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- Zcootz
- Fast Driver
- Posts: 271
- Joined: Sun Jan 22, 2012 10:15 pm
- Vehicle: NB8A
- Location: Phillip Island
Possible flat spot
I've noticed a small flat spot when accelerating gently. It seems to appear in second gear, about half throttle, at 3000-3300 rom there is a slight drop in power that picks up again at 3500. I'm not sure I'd this is just a quirk of the car or normal. Under full throttle the Mx pulls cleanly. It's a nb8a. Has anyone else come across this ?
With two laps to go then the action will begin, unless this is the action, which it is.
Murray Walker
Murray Walker
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Possible flat spot
How many Kms?, does it do it when it's cold or warm?
Guessing other plug leads or cam angle sensor
Guessing other plug leads or cam angle sensor
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: Possible flat spot
Depending on how dramatic it is, what you're experiencing could be normal. NB8A has a slight flat spot in the torque curve as shown in the dyno chart below (between 2700 and 3500rpm in this example):
The solution is easy: don't let your revs drop below 3500rpm!
The solution is easy: don't let your revs drop below 3500rpm!
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Possible flat spot
Guran wrote:The solution is easy: don't let your revs drop below 3500rpm!
No, no, no Bryan. The magic figure we want to always remain above is 5000rpm. 5000rpm!!
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
Re: Possible flat spot
Guran wrote:Depending on how dramatic it is, what you're experiencing could be normal. NB8A has a slight flat spot in the torque curve as shown in the dyno chart below (between 2700 and 3500rpm in this example):
Not sure the dyno plot above is useful as a guide to NB8A torque curves, as at 98rwkw its definitely not a standard NB8A.....
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: Possible flat spot
Fair enough - though the owner of that car did state that it was standard except for a modified air filter.
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
Re: Possible flat spot
Guran wrote:Fair enough - though the owner of that car did state that it was standard except for a modified air filter.
wow. In that case me wants one of them. 25+ kw from an air filter....
- Zcootz
- Fast Driver
- Posts: 271
- Joined: Sun Jan 22, 2012 10:15 pm
- Vehicle: NB8A
- Location: Phillip Island
Possible flat spot
Thanks Guran, that dyno chart makes sense and lines up with what I'm feeling. It's possibly just a characteristic of the engine thats exaggerated but the cold running settings. It's a really small dip and I've only really noticed it driving up a gentle hill around the corner from my home so the engine is always cold at that point. Might let it warm up today then try it in the same spot.
I'll do some forum searches and try to work out how to test the cam sensor.
Thanks
I'll do some forum searches and try to work out how to test the cam sensor.
Thanks
With two laps to go then the action will begin, unless this is the action, which it is.
Murray Walker
Murray Walker
- Zcootz
- Fast Driver
- Posts: 271
- Joined: Sun Jan 22, 2012 10:15 pm
- Vehicle: NB8A
- Location: Phillip Island
Possible flat spot
Oh, and the cars done 130k
With two laps to go then the action will begin, unless this is the action, which it is.
Murray Walker
Murray Walker
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Possible flat spot
Sounds similar to mine, on cold mornings it has a big flatspot (Mine's a bit lower, about 2500rpm)
Once warmed up it goes away, and in warmer weather it doesn't happen much.
Once warmed up it goes away, and in warmer weather it doesn't happen much.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Speed Racer
- Posts: 11856
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Possible flat spot
Zcootz wrote:It's a nb8a.
Any mods?
- Zcootz
- Fast Driver
- Posts: 271
- Joined: Sun Jan 22, 2012 10:15 pm
- Vehicle: NB8A
- Location: Phillip Island
Possible flat spot
Nope, completely stock. It pulls well and no idle problems
With two laps to go then the action will begin, unless this is the action, which it is.
Murray Walker
Murray Walker
-
- Speed Racer
- Posts: 11856
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Possible flat spot
Does the intake pipe from the MAF to the TB across the front of the motor have a Helmholtz resonator attached to it?
This one doesn't: viewtopic.php?f=54&t=49893&p=626317
But the NB8B one did like the NA8 one - you can't miss it - it's basically a pipe with a large chamber on the end. If you're keen to experiment, try swapping to an NB8B intake pipe as the Helmholtz resonator was supposed to remove the dip.
This one doesn't: viewtopic.php?f=54&t=49893&p=626317
But the NB8B one did like the NA8 one - you can't miss it - it's basically a pipe with a large chamber on the end. If you're keen to experiment, try swapping to an NB8B intake pipe as the Helmholtz resonator was supposed to remove the dip.
- Okibi
- Speed Racer
- Posts: 10901
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: Possible flat spot
I was thinking perhaps the intake butterflies might have been "sticking" a bit but I think they open at a higher RPM.
It wouldn't hurt to do some maintenance on your intake manifold but it might not solve the problem.
http://www.miata.net/garage/manifold/index.html
With any surge of power issue on an NA / NB i'd be looking at your leads and plugs then the AFM.
It wouldn't hurt to do some maintenance on your intake manifold but it might not solve the problem.
http://www.miata.net/garage/manifold/index.html
With any surge of power issue on an NA / NB i'd be looking at your leads and plugs then the AFM.
If you had access to a car like this, would you take it back right away? Neither would I.
-
- Racing Driver
- Posts: 692
- Joined: Sat May 09, 2009 2:40 pm
- Vehicle: NB8A
- Location: Canberra
Re: Possible flat spot
I know my (stock) NB8A really comes on song at or around 3500rpm (feels a bit like Vtec kicking in... yo ). That might give the feeling of being a bit flat between 3000 and 3500rpm - but I think that's just the nature of the beast.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 19 guests