MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Moderators: Andrew, -alex, miata, Midori
-
- Racing Driver
- Posts: 1364
- Joined: Fri Jun 12, 2009 12:10 pm
- Vehicle: NB SP
- Location: Sydney
MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
SPINNING WHEEL ALIGNMENT & TECH DAY
Venue: Spinning Wheel, corner Bourke & McEvoy Streets, Waterloo
Date: Saturday, 10 March 2012
Alignment Times: At your allocated time between 7.30am & 1.00pm
MX-5 Set Up Forum: TBA between 1.00 & 2.00 pm at Spinning Wheel following lunch.
Organiser: Victor Lee (BadBong) - Until 15 February, all queries should be directed to Michael Soulos (Midori) 0413 11 33 99, email: michael@soulos.com.au
Ever wondered where to find the railway tracks that MX-5s are supposed to use when going around corners?
The secret lies in the wheel alignment and suspension set up of your car (and the hands that hold the steering wheel).
Whether you are a new owner or a long term driver of an MX-5, here is a chance to have Spinning Wheel align your wheels and provide expert advice on your cars suspension and tyres.
The day will begin with a 'group service' of wheel alignments on our 5s for those who have made their bookings prior to the day, starting from 7:30am to 1:00pm. We'll order some pizzas for lunch for those who are interested at around noon. This will be followed by an open forum headed by Spinning Wheel specialists to discuss NA, NB & NC tyres, wheels, set ups and after market options to best suit your MX-5 and driving preferences.
The Club is negotiating a special discounted alignment costs and additional tuning packages with Spinning Wheel and more info will will be available from mid-Feb. Further instructions on booking procedures will also be published then.
For the time being, please put your name on the EOI list below to help us coordinate the numbers:
1. BadBong
2.
3.
4.
5.
6.
7.
8.
9.
10.
Cheers, Vic (and special thanks to Midori for putting this together while I'm away atm... )
Venue: Spinning Wheel, corner Bourke & McEvoy Streets, Waterloo
Date: Saturday, 10 March 2012
Alignment Times: At your allocated time between 7.30am & 1.00pm
MX-5 Set Up Forum: TBA between 1.00 & 2.00 pm at Spinning Wheel following lunch.
Organiser: Victor Lee (BadBong) - Until 15 February, all queries should be directed to Michael Soulos (Midori) 0413 11 33 99, email: michael@soulos.com.au
Ever wondered where to find the railway tracks that MX-5s are supposed to use when going around corners?
The secret lies in the wheel alignment and suspension set up of your car (and the hands that hold the steering wheel).
Whether you are a new owner or a long term driver of an MX-5, here is a chance to have Spinning Wheel align your wheels and provide expert advice on your cars suspension and tyres.
The day will begin with a 'group service' of wheel alignments on our 5s for those who have made their bookings prior to the day, starting from 7:30am to 1:00pm. We'll order some pizzas for lunch for those who are interested at around noon. This will be followed by an open forum headed by Spinning Wheel specialists to discuss NA, NB & NC tyres, wheels, set ups and after market options to best suit your MX-5 and driving preferences.
The Club is negotiating a special discounted alignment costs and additional tuning packages with Spinning Wheel and more info will will be available from mid-Feb. Further instructions on booking procedures will also be published then.
For the time being, please put your name on the EOI list below to help us coordinate the numbers:
1. BadBong
2.
3.
4.
5.
6.
7.
8.
9.
10.
Cheers, Vic (and special thanks to Midori for putting this together while I'm away atm... )
- kazman
- Driver
- Posts: 94
- Joined: Sat Jul 03, 2010 9:47 pm
- Vehicle: ND - 1.5 GT
- Location: Newtown NSW
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Sounds great, I'm in pending whether or not I have the day off (I'll know about 2 weeks beforehand)
1. BadBong
2. kazman - (pending work roster)
3.
4.
5.
6.
7.
8.
9.
10.
1. BadBong
2. kazman - (pending work roster)
3.
4.
5.
6.
7.
8.
9.
10.
1996 NA8 LE
Wakefield 1:15.86 | SMP South 1:09.66 | Marulan 0:49.10
Wakefield 1:15.86 | SMP South 1:09.66 | Marulan 0:49.10
- dave2221
- Fast Driver
- Posts: 493
- Joined: Thu Sep 17, 2009 10:01 pm
- Vehicle: NB SE
- Location: Sydney
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4.
5.
6.
7.
8.
9.
10.
2. kazman - (pending work roster)
3. dave2221
4.
5.
6.
7.
8.
9.
10.
- Locutus
- Racing Driver
- Posts: 879
- Joined: Thu Jul 26, 2007 7:39 pm
- Vehicle: NB SP
- Location: Sydney
- Contact:
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5.
6.
7.
8.
9.
10.
would love to hang around for the chat, but i've got a clash. T_T;
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5.
6.
7.
8.
9.
10.
would love to hang around for the chat, but i've got a clash. T_T;
- Bizi
- Racing Driver
- Posts: 738
- Joined: Sat Apr 09, 2011 4:17 pm
- Location: Northern Sydney
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6.
7.
8.
9.
10.
Thanks and great idea, Vic, Michael and Spinning Wheel!
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6.
7.
8.
9.
10.
Thanks and great idea, Vic, Michael and Spinning Wheel!
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7.
8.
9.
10.
Victor & Michael - excellent work on setting up this event!
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7.
8.
9.
10.
Victor & Michael - excellent work on setting up this event!
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
-
- Racing Driver
- Posts: 545
- Joined: Sun Apr 05, 2009 3:11 pm
- Vehicle: NA8
- Location: Sydney Eastern Suburbs
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Guran wrote: Victor & Michael - excellent work on setting up this event!
Love the praise but the kudos goes to Victor as his band of merry men . Victor is in India on best man duties for a good friend and I am getting the show on the road and tying up the details with Spinning Wheel due to Victor absence .
I will get details as to registering and costs posted in "More Info" on the Club's Events Calendar this weekend. The link to the webpage is http://www.mx5.com.au/nsw/
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8.
9.
10.
11.
12.
13.
14.
15.
-
- Fast Driver
- Posts: 307
- Joined: Thu Jun 18, 2009 9:26 am
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Think I might have to join the MX5 club? Does this count for associate members? The AW11 needs one just so I know where it is at. Maybe do the track spyder too?
Dont mind being there at 7.30.
Dont mind being there at 7.30.
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Sure, you don't need to own an MX-5 to be a member of the MX-5 Club of NSW. That's what "associate membership" is for. The only thing you miss out on is voting rights. We have dozens of associate members ... one more would be very welcome. Even if you drive an MR2!
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
-
- Fast Driver
- Posts: 310
- Joined: Tue Jul 13, 2010 10:26 pm
- Vehicle: NC
- Location: Northern Sydney
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
This is awesome- great work on starting to put an event together like this!
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9.
10.
11.
12.
13.
14.
15.
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9.
10.
11.
12.
13.
14.
15.
Kris's NC
viewtopic.php?f=57&t=43276
viewtopic.php?f=57&t=43276
- Tedsmx5
- Fast Driver
- Posts: 164
- Joined: Mon Jul 14, 2008 10:35 pm
- Vehicle: NA8 - Supercharged
- Location: Newcastle.
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11.
12.
13.
14.
15.
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11.
12.
13.
14.
15.
Why didn't I buy one years ago?
NA8 Ceramic coated headers, Hi flow cat, 2.5”system, M45 SC 150/62.5 8psi, Dual TB, IC & Adaptronic ECU.
NA8 Ceramic coated headers, Hi flow cat, 2.5”system, M45 SC 150/62.5 8psi, Dual TB, IC & Adaptronic ECU.
- XB12R
- Driver
- Posts: 89
- Joined: Tue May 04, 2010 6:51 pm
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
Tedsmx5 wrote:1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12.
13.
14.
15.
89 NA6
Is always hard to chose between the 5 and the Ducati
Is always hard to chose between the 5 and the Ducati
- rodent
- 강남 스타일
- Posts: 801
- Joined: Tue Feb 07, 2006 11:17 pm
- Vehicle: NA8
- Location: Sydney West
MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13.
14.
15.
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13.
14.
15.
-
- Fast Driver
- Posts: 111
- Joined: Sat Jan 23, 2010 8:04 pm
- Vehicle: NB8B
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13. Villa
14.
15.
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13. Villa
14.
15.
-
- Driver
- Posts: 70
- Joined: Fri Dec 23, 2011 1:57 pm
- Vehicle: NA6
- Location: Sydney
Re: MX5 CLUB SPINNING WHEEL ALIGNMENT & TECH DAY
1. BadBong
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13. Villa
14.Christolo
15.
2. kazman - (pending work roster)
3. dave2221
4. Locutus (~10am slot, if possible)
5. Bizi (also ~10am slot, if possible)
6. Guran (tentative ... lunch and techtalk only)
7. Midori (busy in the morning so it is lunch & techtalk only at this stage)
8. Kris
9. Tedsmx5 (Ted) 9am driving down from Newcastle
10.Barrie
11. XB12R I will take what ever spot is available.
12. rodent
13. Villa
14.Christolo
15.
Return to “New South Wales/ACT”
Who is online
Users browsing this forum: No registered users and 148 guests