I don't have a photo of the manifold handy, but it can be seen here: viewtopic.php?f=57&t=48265 .
Ta
edit: James, no replacing your photobucket photos with prOn because of this link
AVO 1.8 cast manifold and aircon fit?
Moderators: timk, Stu, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, The American, Lokiel, Sean
-
tinsfci
- Fast Driver
- Posts: 326
- Joined: Fri Mar 17, 2006 4:20 pm
- Vehicle: NA - V8
- Location: Perth
AVO 1.8 cast manifold and aircon fit?
The entire drivetrain of my track toy is about to be replaced, and i'm considering dropping the whole lot into my road NA8. So a question for anyone with an NA8 with the AVO cast manifold.... Does it all fit with the air con in place?
I don't have a photo of the manifold handy, but it can be seen here: viewtopic.php?f=57&t=48265 .
Ta
edit: James, no replacing your photobucket photos with prOn because of this link
I don't have a photo of the manifold handy, but it can be seen here: viewtopic.php?f=57&t=48265 .
Ta
edit: James, no replacing your photobucket photos with prOn because of this link
Street='94 with FFS Coldside. Sold 
Race='97 with AVO (soon to be Absurdflow) and GT2560 <--- sod that... LS1 conversion underway!
Race='97 with AVO (soon to be Absurdflow) and GT2560 <--- sod that... LS1 conversion underway!
-
deviant
- Racing Driver
- Posts: 1717
- Joined: Thu Apr 15, 2010 7:23 pm
- Vehicle: NB8B
- Location: Rockingham - Western Australia
Re: AVO 1.8 cast manifold and aircon fit?
Hehe I wont touch it. Maybe the mods can change the thread in to yours or something?
Get Rob to park the Green NA next to yours, if the manifolds are the same then you are good to go. The Green NA used to have AC before I went on a weight saving binge.
Get Rob to park the Green NA next to yours, if the manifolds are the same then you are good to go. The Green NA used to have AC before I went on a weight saving binge.
-
tinsfci
- Fast Driver
- Posts: 326
- Joined: Fri Mar 17, 2006 4:20 pm
- Vehicle: NA - V8
- Location: Perth
AVO 1.8 cast manifold and aircon fit?
Cheers for that. I should have thought to ask Rob. Looks like I'll have a busy couple of weeks playing swapsies!
Street='94 with FFS Coldside. Sold
Race='97 with AVO (soon to be Absurdflow) and GT2560 <--- sod that... LS1 conversion underway!
Race='97 with AVO (soon to be Absurdflow) and GT2560 <--- sod that... LS1 conversion underway!
-
maniac
- Driver
- Posts: 38
- Joined: Sun Oct 30, 2011 5:16 pm
Re: AVO 1.8 cast manifold and aircon fit?
I have the AVO manifold and an unmodified AC, clears without a problem,
Adam
Adam
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 3 guests
