Front Mudguard Liner Mounting Screws/Clips, Door Plugs etc..

Drek · Postby **Drek** » Sun Jan 15, 2012 9:03 pm

Hi All - My car was missing the drivers front plastic Mudguard Liner when I bought it, and I have found a liner, but my Mazda dealer can't help with the steel mounting screws and clips, or the plastic plugs and screws.. Does anyone know of a later model Mazda etc, that uses similar mounting screws, or anywhere I might get something I can use? I also need new plastic plugs and screws for the doors that the armrests screw into, or maybe I'll just have to trawl the wreckers.. Any help appreciated.. Cheers Derek

Silvia · Postby **Silvia** » Mon Jan 16, 2012 8:48 am

Supercheap etc. have racks of plastic bags with small quantities of plastic body clips,bolts and other fittings......
Good to take a sample along to compare...

Drek · Postby **Drek** » Mon Jan 16, 2012 10:32 am

Thanks Sylvia - I'll give them a try. Cheers

de Bounce · Postby **de Bounce** » Mon Jan 16, 2012 5:14 pm

Silvia wrote:Supercheap etc. have racks of plastic bags with small quantities of plastic body clips,bolts and other fittings......
Good to take a sample along to compare...

Closest I have found at SCA (that work) are called SCRIVE CLIPS 8MM - HOLE P/No PP68
Come in a packet of 2.

Mr Morlock · Postby **Mr Morlock** » Wed Jan 18, 2012 2:20 pm

Bursons also stock or can order plastic fittings. Insofar as screws are concerned you will need a sample or a proper description of the fastener involved.If you have those screws already on the vehicle then you can remove for an id. A specialist bolt and screw supplier can then point you in the right direction.

tuned_to_fly · Postby **tuned_to_fly** » Wed Jan 18, 2012 2:42 pm

http://www.mx5parts.co.uk/fastner-wheel ... p-883.html

All those parts will be on that site somewhere!

Muzdaman · Postby **Muzdaman** » Wed Jan 18, 2012 6:35 pm

http://parts.arlingtonmazda.com/

Lots of new Mazda parts here. I've used them before, got stuff fast.

Jim007 · Postby **Jim007** » Tue Mar 06, 2012 10:28 pm

You will spend a small fortune buying clips and screws new. If you have a local pick a part go trawling and grab anything you see. I do up a lot of cars and spent 3 hours at Pick A Part one day and came away with about 200 plastic clips of various kinds for bumpers etc at a grand total cost of $5.

de Bounce · Postby **de Bounce** » Wed Mar 07, 2012 5:33 am

After paying the proverbial fortune at supercrap for a couple of clips, I went looking on ebay
Found a seller "thecarson008" who sells them in bulk packs.

93_Clubman · Postby **93_Clubman** » Wed Mar 07, 2012 11:56 am

Jim007 wrote:If you have a local pick a part go trawling and grab anything you see. I do up a lot of cars and spent 3 hours at Pick A Part one day and came away with about 200 plastic clips of various kinds for bumpers etc at a grand total cost of $5.

+1 for your local Mazda wrecker, if you have one local that is.