Went to EC skid pan yesterday, had a ball as per usual. You can skip to 1.26 and 4.03 for the runs of mine that got recorded in this video made by a mate in the blue 6 driving like a madman.
My Bleck 8B
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
Re: My Bleck 8B
Long time no post.
Went to EC skid pan yesterday, had a ball as per usual. You can skip to 1.26 and 4.03 for the runs of mine that got recorded in this video made by a mate in the blue 6 driving like a madman.
Went to EC skid pan yesterday, had a ball as per usual. You can skip to 1.26 and 4.03 for the runs of mine that got recorded in this video made by a mate in the blue 6 driving like a madman.
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: My Bleck 8B
Looks like a lot of fun, pity each run is so short, should be 3 times longer as a minimum.
If you had access to a car like this, would you take it back right away? Neither would I.
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
Re: My Bleck 8B
Headed out to Wakefield last weekend with the NSCC. The weather wasn't looking so good during the drive down with a few patches of sprinkling but once we got to the circuit, there was no sign of rain and the track was slippery but dry enough. Before lunch was the most ideal part of the day with me bettering my PB with a 1:15.001. FUUUUU! With that PB I knew I was going to smash out a 14 by the end of the day. Next session, my lap timer gave me a 14.9x and then the following lap came a 1:14.78 which was verified with natsoft's 1:14.777.
After that the sun came out and I got sunburnt as a result. Tried my best to better my new PB but with the heat around, the car just felt sluggish in the exits and down the straight so there wasn't much I could do except braking later and putting the power on earlier. Ended up with some low 15's and that's about the best I could do. Next time out, if I haven't gotten semi's yet, will be aiming for a low 14 which should be possible with this set up. Might need a more aggressive alignment though.
Some piccies.
My dad had fun too! Broke into the 16's with a 1:16.966
After that the sun came out and I got sunburnt as a result. Tried my best to better my new PB but with the heat around, the car just felt sluggish in the exits and down the straight so there wasn't much I could do except braking later and putting the power on earlier. Ended up with some low 15's and that's about the best I could do. Next time out, if I haven't gotten semi's yet, will be aiming for a low 14 which should be possible with this set up. Might need a more aggressive alignment though.
Some piccies.
My dad had fun too! Broke into the 16's with a 1:16.966
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
- zorak
- Fast Driver
- Posts: 165
- Joined: Wed Feb 04, 2004 9:06 am
- Vehicle: NB8A
- Location: St Ives
Re: My Bleck 8B
mate I saw this car in the costco carpark tonight - are you running spacers on your 6uls?
car looked great btw
car looked great btw
NB8A
WP 1:10.69
SMSP (south) 1:04.41
SMSP (GP) 1:53.98
WP 1:10.69
SMSP (south) 1:04.41
SMSP (GP) 1:53.98
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: My Bleck 8B
wow...that looks siiick!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Racing Driver
- Posts: 706
- Joined: Wed Jun 22, 2011 10:08 pm
- Vehicle: NA8
- Location: Blakehurst NSW
My Bleck 8B
Is that last photo taken out back of Sizzler carpark, Carlton?
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: My Bleck 8B
Regie wrote:wow...that looks siiick!
Love the red rims; IMO black rims "disappear into the tyre and wheel arch" and look too drab - I reckon if you've got great rims you want to be able to see them, not just when you get close up.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
- Racing Driver
- Posts: 1364
- Joined: Fri Jun 12, 2009 12:10 pm
- Vehicle: NB SP
- Location: Sydney
Re: My Bleck 8B
honki3rider wrote:
Kev... just as I'm about to give up on the 6ULs you come up with a photoshop image of exactly what I was imagining...
Now how am I gonna work the wheels into the budget?....
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: My Bleck 8B
BadBong wrote:honki3rider wrote:
Kev... just as I'm about to give up on the 6ULs you come up with a photoshop image of exactly what I was imagining...
Now how am I gonna work the wheels into the budget?....
you can always sell a Kidney
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Fast Driver
- Posts: 207
- Joined: Sun May 11, 2008 3:37 pm
- Vehicle: ND - 2 GT
- Contact:
Re: My Bleck 8B
marty085 wrote:Is that last photo taken out back of Sizzler carpark, Carlton?
Was taken in the carpark of a mates place. Helping another mate test fit some wheels hence the trolley jack .
BadBong wrote:
Kev... just as I'm about to give up on the 6ULs you come up with a photoshop image of exactly what I was imagining...
Now how am I gonna work the wheels into the budget?....
Heh heh, photoshop.
Who is online
Users browsing this forum: No registered users and 139 guests