Weather StripThe passenger door was missing 2 clips

So the weather strip sat up quite high and didn't seal. Big thanks to Eren who gave me some spare clips he had, all nice and flush now and no more squeaky door trim after rain!
Headlight coversThe headlight cover gaps were pretty dodgy looking, so I fixed them.
I did the proper way for the passenger side:
Step 1. Remove the plastic light bezel
Step 2. Loosen the 4 screws holding on the headlight cover.
Step 3. Adjust as needed, and retighten when done.
Worked well, however I could not get the loosen the screws of the driver side, even after spraying WD40 everyday for a week, just won't budge.
Lucky for me there is a dodgy way also:
Step 1: Remove the plastic light bezel
Step 2: Grab rear edge of barn doors, tug upwards gently.
Yay flush!

Head UnitTo mount the head unit up the top, I had to drill holes in the original cage

When I got the HU the guy tried to sell me a wiring loom adapter. $30??? pfffttt no thanks.
30 mins later of soldering...

Fully sick remote bass control mounted in centre console glove box

So I finally got the proper sized cubby hole for the NA tombstone. Was supplied with screws and fits absolutely perfectly, I could not be happier with how it looks!
