I have just done a coolant rerout by running a pipe from the back of the head to
the top of the radiator as per lots of people have done
What is different is that I have used the original thermo housing at the front
and Teed into the rad hose just before the radiator
I am taking full flow from both end of the head with 2 thermo's
Any comments !
olboy
Coolant rerout, Will this work
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
olboy
- Fast Driver
- Posts: 204
- Joined: Tue Sep 22, 2009 7:28 pm
- Vehicle: NA6 - Turbo
- Location: NSW South Coast
-
Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Re: Coolant rerout, Will this work
What opening temp is the rear thermostat?
The only thing I can see as a concern would be the radiator top hose and radiator itself as it's being fed coolant that has not been cooled down by the heater core or re-mixing from the front of the engine, but if both items are in good condition then it is of little or no concern.
The only thing I can see as a concern would be the radiator top hose and radiator itself as it's being fed coolant that has not been cooled down by the heater core or re-mixing from the front of the engine, but if both items are in good condition then it is of little or no concern.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 102 guests
