So guys, after swapping out the OEM intake on my mates euro today I want to make one for the NC aswell.
The main difference between the euro and the NC is that the MAF sensor on the NC is connected to the OEM box lid. So what I was thinking was get a silicone/steel bit of piping and then maybe drill out a new hole for the MAF sensor and then use self tapping screws to screw the sensor back into the silicone/steel.
What I do not know is would the screws stay in the silicone?
What's everyone's opinion on this?
and I dont want to get the MazdaSpeed intake as I am very short on cash and plus DIY makes it feel like the car is more 'yours'
Custom air intake
Moderators: timk, Stu, zombie, Andrew, -alex, miata, PUR157
-
kayye
- Driver
- Posts: 84
- Joined: Tue Oct 18, 2011 2:04 am
- Vehicle: NC
- Location: Shire rat
-
kayye
- Driver
- Posts: 84
- Joined: Tue Oct 18, 2011 2:04 am
- Vehicle: NC
- Location: Shire rat
Re: Custom air intake
any suggestions guys?
-
Old Dude
- Racing Driver
- Posts: 1166
- Joined: Tue Apr 07, 2009 8:06 pm
- Vehicle: NB8B
- Location: Gold Coast
Re: Custom air intake
the screws would probably be OK for a while but not really what I would want to use long term, but screw some into some silicone and see what you think?
I would ideally, get some steel piping and make up a suitable mounting bracket on the steel pipe and clamp the silicone piping to either end of the steel piping.
But thats just me
Cheers
Dale
I would ideally, get some steel piping and make up a suitable mounting bracket on the steel pipe and clamp the silicone piping to either end of the steel piping.
But thats just me
Cheers
Dale
You do not have the required permissions to view the files attached to this post.
"Everybody dies......, but not everybody lives" ;-)
MX 5 2001 Grace Green
NB8B
MX 5 2001 Grace Green
NB8B
-
mazdarati
- Driver
- Posts: 49
- Joined: Mon Nov 14, 2011 9:36 am
- Vehicle: NB8A
- Location: Melbourne; South-East
- Contact:
Re: Custom air intake
Just an idea, might be better to save up for a brand name CAI..I dont know how handy you are at bending metal/fabricating and whatnot but generally homemade custom CAI's tend to look at home in Commondores, not fine machines such as ours.
However! If you are able to fabricate it nicely with stainless steel or some such, i'd also fabricate a mounting plate for the sensor so you don't have a dodgy 'stuck on with silicone' look to an otherwise nice pipe.
However! If you are able to fabricate it nicely with stainless steel or some such, i'd also fabricate a mounting plate for the sensor so you don't have a dodgy 'stuck on with silicone' look to an otherwise nice pipe.
-
kayye
- Driver
- Posts: 84
- Joined: Tue Oct 18, 2011 2:04 am
- Vehicle: NC
- Location: Shire rat
Re: Custom air intake
I ended up ordering a part from amazon that already has the mounting bracket and all 
Saved me alot of work, now just waiting for it to arrive
Is there really that much of a difference between brand name intakes and DIY ones? After all they are just metal pipes...
Saved me alot of work, now just waiting for it to arrive
Is there really that much of a difference between brand name intakes and DIY ones? After all they are just metal pipes...
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Custom air intake
Of course not. With homemade at least you can choose how loud it is, what brand filter etc.
But yes a quality filter, a bracket and cone style enclosure shouldnt cost a hell of a lot more than 100 or 150.
Dann
But yes a quality filter, a bracket and cone style enclosure shouldnt cost a hell of a lot more than 100 or 150.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
Return to “MX5 Technical Guides”
Who is online
Users browsing this forum: No registered users and 30 guests
