Kris's MY08 NC

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Fri Nov 18, 2011 4:55 pm

MX5 NSW CUB MEMBERSHIP & CAMS L2S LICENCE

All the necessary documents have arrived with cool membership dates such as 11/11/2011 :)
My next track day will be FEB which seems like a long time away, in the mean time i need to clean up my windscreen and put my MX5 NSW club sticker on! 8)
You do not have the required permissions to view the files attached to this post.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Fri Nov 18, 2011 5:28 pm

sticker on... top of windscreen drivers side.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Sun Dec 11, 2011 11:34 pm

All is well with the mx5, the only joy with all the rain in Sydney (minimal toplessness) is being able to drive in the wet with my super sports :D

SUPPLIES

HPS front pads and EBC Red Stuff Rears for street.
EBC Yellow Stuff Front Pads for track days.
K&N Oil Filters

IMG_8245c.jpg


Upgrade
Stainless Steel Brake lines and a really super go fast bit..... stainless steel clutch line :twisted:

IMG_8247c.jpg


Now back to the mechanic for install and fluid changes :)
You do not have the required permissions to view the files attached to this post.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Mon Dec 12, 2011 12:10 pm

Oil Changes

Early Christmas present for the NC, Mobil 1 Fully Synthetic 5w-50 and Motul RBF600 brake fluid.
You do not have the required permissions to view the files attached to this post.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Thu Dec 22, 2011 9:46 pm

TRACK RIMS
About a fortnight ago i took a trip down to Melbourne (unfortunately by plane, i'd much rather have dríven) and meet up with a VIC MX5 enthusiast (super top bloke) who was selling some RX7 FD 16x8 RIMS in really decent condition! So i've joined the club of nc guys running FD rims. I sent them up to Sydney with "E GO" (as recommended by MX5 Cartalk forumites) and the service and price was excellent.

Now i need to clean these rims up (anyone have any tips???) and put some r specs on them!
(I was thinking i might paint them gun metal grey or black... but this might add too much weight :wink: )
More photos once they are sparkling!
IMG_8576c.jpg

IMG_8577c.jpg

IMG_8578c.jpg
You do not have the required permissions to view the files attached to this post.

Gmi
Fast Driver
Posts: 293
Joined: Thu May 12, 2011 1:30 pm
Vehicle: NC
Location: NSW sydney

Re: Kris's MY08 NC

Postby Gmi » Fri Dec 23, 2011 12:03 am

Awesomeness!!!

User avatar
CoffeeBoss
suntory
Posts: 1081
Joined: Sun Aug 01, 2004 10:58 pm
Vehicle: NC
Location: Sydney / Sth Highlands
Contact:

Re: Kris's MY08 NC

Postby CoffeeBoss » Fri Dec 23, 2011 4:46 pm

I like where this is all going!

I think fit the wheels up before you decide on changing the colour.

But consider also - dark coloured wheels hide brake dust :D

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Sat Dec 31, 2011 10:05 am

Finally had the braided brake lines and clutch line installed- RBF600 throughout.

While learning how to install the lines and bleed them with the mechanic i also had an oil change and filter done.
The K&N filter provided by GWR (which is massive compared to the OEM) did not fit so i have to follow that up- I might have got the wrong one or perhaps it does not fit the Australian NC?

Also cleaned up the RX7 rims, they are not 100% but i think they are pretty good for 2nd hand and a track rim which won't make me cry if i get them a bit scratched this year at the track.

Need to get some semi-slicks, i've got a good deal on some hard federal evo 595 and also kumho v70a so ill look into that hopefully before feb 19th - i've already filled out my entry form :D

Also exploring changing the standard seat rail mounts to gain a few extra inches for my helmet, couple of threads on the US Miata site have been helpful.
You do not have the required permissions to view the files attached to this post.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Sun Jan 01, 2012 1:52 pm

Here's the pic of the SS clutch line :evil:

IMG_8607c.jpg
You do not have the required permissions to view the files attached to this post.

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Mon Jan 23, 2012 9:19 pm

D01s Mounted Up

Picked up some used D01s that were from a well known winning blue NC :D

Also, I was thinking how it really is a credit to the MX5 community that each person i've meet through my association with MX5's has turned out to be a really top guy and Bear who sorted me out with these semi's is no exception.

Just need to find some time to get the lowering right, a new alignment and then hopefully a lot more investment... but this time in the driver !!!

IMG_9287c.jpg

IMG_9280c.jpg

IMG_9274c.jpg

IMG_9262c.jpg
You do not have the required permissions to view the files attached to this post.

Gmi
Fast Driver
Posts: 293
Joined: Thu May 12, 2011 1:30 pm
Vehicle: NC
Location: NSW sydney

Re: Kris's MY08 NC

Postby Gmi » Mon Jan 23, 2012 11:55 pm

Looks awesome!!!!!!!!!

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Fri Feb 03, 2012 3:22 pm

Century Battery

I'd done a bit of researching car batteries and lightweight options but in the end replaced my well and truly dead OEM Panasonic with a century battery from my local battery store.

IMG_9326c.jpg


IMG_9339c.jpg


I've recently been learning a bit about the auto detailing world and have started to clean and protect my car a bit better than before. Working on wheels and interior thus far.

IMG_9304c.jpg


IMG_9306c.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Re: Kris's MY08 NC

Postby TieNN89 » Fri Feb 03, 2012 9:17 pm

Mmm very nice

How many kms has it done now?

Seeing as your battery has died I'd say mine won't be too far off then being an MY07 unless it has already been replaced

kris
Fast Driver
Posts: 310
Joined: Tue Jul 13, 2010 10:26 pm
Vehicle: NC
Location: Northern Sydney

Re: Kris's MY08 NC

Postby kris » Sun Feb 05, 2012 4:02 pm

Hey Tien!
Yes i've just gone past 63900.
Still can't get enough of this car! I've lowered the front down a bit more and i think i have it right where i like it... once i clean up the outside of the car ill take some more photos. (all the rain in sydney has 'filthified' my NC).

User avatar
taminga16
Speed Racer
Posts: 3617
Joined: Thu Aug 06, 2009 12:22 am
Vehicle: NC
Location: Central Victoria

Re: Kris's MY08 NC

Postby taminga16 » Mon Feb 06, 2012 3:07 pm

Hi Kris,
Great thread, might I ask where you purchase the SS brake lines.
Cheers.
Greg.
When you turn your car on, does it return the favour?


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 171 guests