Overcooling

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Overcooling

Postby NitroDann » Fri Dec 09, 2011 10:09 am

I think he is saying that his guage sender is on the cold side of the thermistat, then it seems that it stays cold for a few minutes and then when the thermostat opens it jumps up.

Id check the thermostat.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Re: Overcooling

Postby mitch_f1 » Fri Dec 09, 2011 6:17 pm

^^ exactly right. I will be checking thermostat. I am 90% sure that the gauge is fine, as I got it brand new, and it is a VDO gauge. Plus there isn't much to go wrong in a mechanical gauge. Also, sorry for the hijack

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Overcooling

Postby project.r.racing » Fri Dec 09, 2011 6:21 pm

Makes sense. Thermostat must be openning early them. Should be 82C for NA6 and 88C for all others. My old man memory isn't good though.

User avatar
mrpham
Forum sponsor
Posts: 856
Joined: Tue Sep 20, 2011 8:42 pm
Vehicle: NA6
Location: Brisbane
Contact:

Re: Overcooling

Postby mrpham » Tue Dec 13, 2011 1:17 pm

Had similar issues, just crappy Tridon thermostat. Never seem to have much luck with them.

Years ago I bought a Tridon one for my Daihatsu Feroza and that was stuck closed, then bought one for my Nissan S15 and that wasn't opening fully.

Staying with genuine from now one :P
Current Forum Specials!

Frame Rail Braces - http://goo.gl/xJtRTs
COPs Bracket - http://goo.gl/sxJWhF

Build Thread - http://goo.gl/L3ZuKU

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Re: Overcooling

Postby mitch_f1 » Tue Dec 27, 2011 2:24 pm

Took out the genuine mazda thermostat today and boiled it up to see when it was opening, and it is fuly open by about 84*C, which does not explain why my around town temperature is about 60-70*C. Suggestions?

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Overcooling

Postby project.r.racing » Tue Dec 27, 2011 5:34 pm

what temp did it start opening is the real question, doesn't matter where it fully opens.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Overcooling

Postby NitroDann » Tue Dec 27, 2011 5:52 pm

what prr said.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Re: Overcooling

Postby mitch_f1 » Tue Dec 27, 2011 7:36 pm

Around about 80*C, was approx fully open by 84*C

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Re: Overcooling

Postby mitch_f1 » Sun Jan 01, 2012 10:31 pm

I am now pretty sure that it is the gauge, as after an easy drive it showed a reading on 120*C. The cluster gauge read just below middle and the fan was not on. Over the space of about 5mins it went from 120*C to 80*C to 100*C. Gonna call up rare spares (where I got it from) tomorrow


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 96 guests