Gear selection getting more difficult

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Silvia
Racing Driver
Posts: 677
Joined: Thu Nov 17, 2011 1:42 pm
Vehicle: NB8B
Location: Moffat Beach QLD.

Re: Gear selection getting more difficult

Postby Silvia » Sat Nov 19, 2011 4:48 pm

Thanks Speedy, that sounds doable now.... :lol:
Silver Nomad
2002 NB8C

samx5
Fast Driver
Posts: 172
Joined: Tue Feb 24, 2009 10:59 am
Vehicle: NB8A
Location: Radelaide SA

Re: Gear selection getting more difficult

Postby samx5 » Tue Nov 22, 2011 8:37 pm

A belated update.......I replaced the bush on mine, renewed the turret oil and reasssembled. Made practically no difference. Took it to my friendly Mazda dealer, they checked the gearbox oil and found it to be too thick - around 85W-90. When I had it replaced last year I was told it was 75W90. It was shifting fine until the track day, then gradually got worse in the few weeks after. Mazda said it should have 75W-80 (doesn't say that in my owners manual though). Anyway they replaced the oil and its 90% back to being great again. Still a bit baulky when cold but not too bad. Is occasionally a little bit "gummy" on an occasional shift but nothing too bad. Seems like the heat of the track day may have caused the oil to go bad???? Don't have any other explanation.
Was: 1988 Corolla 4A-GE Twin Cam, 1991 Laser TX3, 1995 Peugeot 306 S16, 2003 Astra Sri Turbo, 2007 SP23 Lux
Now:1999 NB8A, 2011 Outlander VR-X

93_Clubman
Speed Racer
Posts: 11856
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Gear selection getting more difficult

Postby 93_Clubman » Wed Nov 23, 2011 12:06 am

Mike, you might have already seen this but best GB result I've heard of is this recent one by SP:
viewtopic.php?f=29&t=48888&p=615915#p615915

viewtopic.php?f=29&t=48888&p=616012#p616012

samx5
Fast Driver
Posts: 172
Joined: Tue Feb 24, 2009 10:59 am
Vehicle: NB8A
Location: Radelaide SA

Re: Gear selection getting more difficult

Postby samx5 » Thu Nov 24, 2011 6:28 pm

Thanks Paul, might give the Wynns or something similar a go. Otherwise if I drain the gearbox again I may get rid of the remnants of the old oil & it may improve once more. Don't want to spend too long on it though, it shouldn't be this difficult!!
Cheers, Mike
Was: 1988 Corolla 4A-GE Twin Cam, 1991 Laser TX3, 1995 Peugeot 306 S16, 2003 Astra Sri Turbo, 2007 SP23 Lux
Now:1999 NB8A, 2011 Outlander VR-X


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 119 guests