Cosworth camshafts for NC

NC13 · Postby **NC13** » Tue Nov 15, 2011 11:34 pm

Thanks for all the constructive inputs... I may have a crack at the cams + ECU and see how it goes, installation and tuning won't be a problem for me as I've got mates to help with the install and tune..... Fingers crossed the car will still run after lol!

Postby **NitroDann** » Tue Nov 15, 2011 11:38 pm

what ecu?

Dann

greenMachine · Postby **greenMachine** » Wed Nov 16, 2011 1:09 am

orx626 wrote:
NitroDann wrote:Im saying that so far as I am aware, no one has both cams and an ecu on an NC in australia.

Is this incorrect? Sorry if it is.

Dann

Cool. That's my understanding as well Dann. Would love to know if there is someone outside of the MX5cartalk world (but it Australia) that has done both ECU and cams.

Cheers,
Danny

Gary Stewart?

:mrgreen:

NMX516 · Postby **NMX516** » Wed Nov 16, 2011 9:08 am

greenMachine wrote:
orx626 wrote:
NitroDann wrote:Im saying that so far as I am aware, no one has both cams and an ecu on an NC in australia.

Is this incorrect? Sorry if it is.

Dann

Cool. That's my understanding as well Dann. Would love to know if there is someone outside of the MX5cartalk world (but it Australia) that has done both ECU and cams.

Cheers,
Danny

Gary Stewart?

Yeah, I would have thought some of the local race prepped NC's could have had different cams... They certainly run stand alone aftermarket ECU's.

Postby **NitroDann** » Wed Nov 16, 2011 10:48 am

I would imagine that race NCs have full standalones that control engine only. As they wouldnt mind losing central lockling etc etc or whatever else the ecu runs.

Dann

greenMachine · Postby **greenMachine** » Thu Nov 17, 2011 1:46 pm

NitroDann wrote:I would imagine that race NCs have full standalones that control engine only. As they wouldnt mind losing central lockling etc etc or whatever else the ecu runs.

Dann

If you look hard enough you will find at least one road car that is running a parallel ecu ...

:mrgreen:

Postby **NitroDann** » Thu Nov 17, 2011 2:47 pm

Ok. Anyways, I think the point is that many can tell op what to expect from these cams by looking at the spes, and an aftermarket ecu will not be needed but is preffered.

Dann