charlie's na6

plohl · Postby **plohl** » Thu Nov 03, 2011 9:44 pm

wheels.are.amazing!

sailaholic · Postby **sailaholic** » Thu Nov 03, 2011 9:44 pm

Looks epic, how you're happy with the end result

Sent from my GT-I9100 using Tapatalk

Postby **Okibi** » Thu Nov 03, 2011 9:59 pm

loads of lip!

broady · Postby **broady** » Thu Nov 03, 2011 10:50 pm

Fark! Epic!

kelvinator · Postby **kelvinator** » Thu Nov 03, 2011 11:08 pm

Jaw.....floor.....wow!
Now I really like where this car is going!!!

Jeo · Postby **Jeo** » Fri Nov 04, 2011 8:53 am

I absolutely love flares when you have the wheels to back it up. Very nicely done!

16bit · Postby **16bit** » Fri Nov 04, 2011 12:38 pm

wheel specs or ban

dave2221 · Postby **dave2221** » Fri Nov 04, 2011 2:29 pm

16bit wrote:wheel specs or ban

same as above....

plohl · Postby **plohl** » Fri Nov 04, 2011 3:14 pm

15x9 -2

charlie_91 · Postby **charlie_91** » Fri Nov 04, 2011 3:33 pm

what he said ^^^

16bit · Postby **16bit** » Fri Nov 04, 2011 3:45 pm

dope.

got new hubs on order?

what sort of alignment are you hoping for? you might need offset bushing if you don't already have them.

charlie_91 · Postby **charlie_91** » Fri Nov 04, 2011 5:38 pm

16bit wrote:dope.

got new hubs on order?

what sort of alignment are you hoping for? you might need offset bushing if you don't already have them.

Cheers

Well about that.. i bought a 4x114.3 conversion setup which was brand new hubs but the piece of sh*t seller stopped replying to my emails after i paid. I wont ever see them or my money again..

So im just gonna stay 4x100 but with arp studs etc. The alignment i want is around -3.5* to -4* camber FRONT not sure about toe ect. Rear i want around -2* Camber

charlie_91 · Postby **charlie_91** » Tue Nov 08, 2011 4:50 pm

sup guys..

so the car is currently at the panel beaters getting all the work done to it.. Im getting tires put on the wheels this arvo.. I need a favor from someone in brisbane though.

I need to test fit my works with nb8b brakes or wilwood 4 piston fronts.. I know ill need a slip on spacers to clear just want to know how much

if u can help me text or call me. 0433 958 361

Charlie

Hjt · Postby **Hjt** » Tue Nov 08, 2011 5:39 pm

FYI its the pin at the rear of the calipers that it wont clear, and it is "possible" to sheer it off but I wouldn't recommend it. What tyres are you going with? Stretch or better fitment?