Need HELP with 1990 aircon pulley. Non PS.

Pokmx5 · Postby **Pokmx5** » Mon Oct 31, 2011 5:50 pm

Hey Guys,

Today i thought ill replace my aircon belt, well more then replace i thought ill put one on as the previous owner had it cut off(the belt). So i took the pulley off and put on the belt and went back and tightened everything but i have a problem where the pulley's back is now touching the bracket on which is sits. I have looked everywhere and im 100% that nothing has fallen off or lost from my perspective.

So what i did was attach two images showing the mount and the parts i have. Can any1 assist in telling me what im missing or what im doing wrong?

Thats the mount the pulley was on.

And these are the parts i have minus the belt.

any help would be great

.

Pok.

Pokmx5 · Postby **Pokmx5** » Mon Oct 31, 2011 7:58 pm

If any1 knows what goes behind the pulley to keep it free spining rather then touching the bracket that would be even more useful.
Cheers,
Pok.

Postby **NitroDann** » Mon Oct 31, 2011 8:04 pm

A washer?

Dann

tbro · Postby **tbro** » Mon Oct 31, 2011 8:07 pm

Part # BP01-15-933 Collar.

Pokmx5 · Postby **Pokmx5** » Mon Oct 31, 2011 11:46 pm

Thanks Tbro,

where do i get one from ? In melb pref.

cheers,

93_Clubman · Postby **93_Clubman** » Tue Nov 01, 2011 1:53 pm

Mazda dealer or a Mazda wrecker, although the wrecker is probably only likely to sell the complete assembly unless they've got an unserviceable one. Worth contacting James at the MX5 Centre <http://www.mx5centre.com.au/>, but I don't think they stock used parts since they moved. There are Mazda wreckers in Clayton & Dandenong that have MX5 parts, & I'm sure there are others around the Melb suburbs, but I just don't know their location.