Ohlins installed and I'm putting some new tyres on my NC.
While they all have the same tread, I'd like to have a look at the corner weighting.
Anyone familiar with someone in Sydney who has the gear and will do a decent job.
Corner weighting
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Racing Driver
- Posts: 1064
- Joined: Wed Jun 24, 2009 5:49 pm
- Vehicle: NC
- Location: Southie...NOT from " the Shire " :/.
Corner weighting
Rob
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
- Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: Corner weighting
Chris has a set of scales but he's at Orimbah and tied up with High Country Targa for a while.
I'm on the que.
East Coast Suspension at Taren Point do it also. Wasn't cheap. From memory around $400 18 months ago when I enquired.
I'm on the que.
East Coast Suspension at Taren Point do it also. Wasn't cheap. From memory around $400 18 months ago when I enquired.
-
- Driver
- Posts: 61
- Joined: Tue Aug 17, 2010 3:03 pm
Re: Corner weighting
You can get it done at Heasmans Steering.
How do i know...i'm the guy who does it!
jonathon.mckinnon@bilstein.com.au
How do i know...i'm the guy who does it!
jonathon.mckinnon@bilstein.com.au
-
- Fast Driver
- Posts: 293
- Joined: Thu May 12, 2011 1:30 pm
- Vehicle: NC
- Location: NSW sydney
Re: Corner weighting
Heasmans good job!!
- Old Dude
- Racing Driver
- Posts: 1166
- Joined: Tue Apr 07, 2009 8:06 pm
- Vehicle: NB8B
- Location: Gold Coast
Re: Corner weighting
jonosx wrote:You can get it done at Heasmans Steering.
How do i know...i'm the guy who does it!
jonathon.mckinnon@bilstein.com.au
you guys do great work! you were recommended to me 30 years ago. You bent/adjusted some bits on my Subaru many years ago to fix a tyre wear problem and I never had the problem again.
Cheers
Dale
"Everybody dies......, but not everybody lives" ;-)
MX 5 2001 Grace Green
NB8B
MX 5 2001 Grace Green
NB8B
- Dweezle
- Racing Driver
- Posts: 1923
- Joined: Wed Mar 12, 2008 8:51 am
- Vehicle: NA6
- Location: Sydney
Re: Corner weighting
jonosx wrote:You can get it done at Heasmans Steering.
How do i know...i'm the guy who does it!
jonathon.mckinnon@bilstein.com.au
What sorta of $$ figures would we be looking at?
ALL MUSCLE CARS ARE CRAP
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
-
- Driver
- Posts: 61
- Joined: Tue Aug 17, 2010 3:03 pm
Re: Corner weighting
Straight up corner weight is $264.
Obviously if you need an alignment as well this is extra.
Obviously if you need an alignment as well this is extra.
- Dweezle
- Racing Driver
- Posts: 1923
- Joined: Wed Mar 12, 2008 8:51 am
- Vehicle: NA6
- Location: Sydney
Re: Corner weighting
Good to know.
Thanks!!
Sent from my GT-I9100T using Tapatalk
Thanks!!
Sent from my GT-I9100T using Tapatalk
ALL MUSCLE CARS ARE CRAP
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
-
- Racing Driver
- Posts: 1064
- Joined: Wed Jun 24, 2009 5:49 pm
- Vehicle: NC
- Location: Southie...NOT from " the Shire " :/.
Re: Corner weighting
Thanks Jono, I'll be in touch...always trusted Heasmans
Rob
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
-
- Learner Driver
- Posts: 20
- Joined: Mon Feb 02, 2009 9:55 pm
- Vehicle: NA6
- Location: sydney 2216
Re: Corner weighting
I drove past last weekend and it looked like u guys had shut up shop?? There were some painters out the front on princess hwy side.. Usually I see an s14 tucked away in the corner..
and no I dont stalk the place, I live down the road and its on my daily commute.
Good to hear that u guys are still there!
and no I dont stalk the place, I live down the road and its on my daily commute.
Good to hear that u guys are still there!
-
- Driver
- Posts: 61
- Joined: Tue Aug 17, 2010 3:03 pm
Re: Corner weighting
Just sprucing the place up a little with a fresh coat of paint.
My black NB is usually parked out the front.
Feel free to say gday if your getting some work done.
My black NB is usually parked out the front.
Feel free to say gday if your getting some work done.
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: Corner weighting
Princess Hwy???!
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
-
- Driver
- Posts: 61
- Joined: Tue Aug 17, 2010 3:03 pm
Re: Corner weighting
Yep thats the one.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 142 guests