Greddy TD04H flange question

Dweezle · Postby **Dweezle** » Sat Oct 15, 2011 6:54 pm

Yup, super NOOB question all.

Can someone tell me what flange the Greddy/Mitsu TD04H turbo uses?
Is it a T3, T25 etc etc or is it just a TD04 flange?

Yeah new to all this turbo talk, been googleing for a while now.
Trying to work out what manifolds i can use which always leads to the flange design.

Any help muchly appreciated!!

Postby **NitroDann** » Sat Oct 15, 2011 7:02 pm

tdo4 flange. But how come a tdo4?

Dann

Dweezle · Postby **Dweezle** » Sat Oct 15, 2011 7:17 pm

PMD in frustration

tdo4 flange. But how come a tdo4?

Dweezle · Postby **Dweezle** » Sat Oct 15, 2011 7:24 pm

Just found what looks to be an answer.

http://www.mx5cartalk.com/forum/viewtopic.php?f=29&t=20561&start=0

Sounds like the Greddy one is a T2 flange for anyone who sees this while searching.

Dweezle · Postby **Dweezle** » Mon Oct 17, 2011 3:42 pm

Sorry to bring this back again. :oops:

Can someone confirm or bitch slap me if i am wrong!!!

The Greddy TD04 Uses a T2 Flange.
A T2 flange is what a T25 etc Turbo Uses?
Like the T2 bit stands for T2x?

I ask as i have been calling everyone today, GCG, JUST JAP, GREDDY etc etc, all who tell me they do not have Gaskets either in Stock or ever for this Turbo.
Found a part number for the Greddy one, 11900123.
The measurements seem to add up for it being the same as a T25.
40mmx70mm

Postby **NitroDann** » Mon Oct 17, 2011 4:45 pm

yeah all T2x flanges are the same. I have a T2 and a T2554 and despite one is a 240hp turbo and one is a 140hp turbo both are identical.

Dann

Dweezle · Postby **Dweezle** » Mon Oct 17, 2011 5:10 pm

Thanks Dann.
I actually dropped the manifold and turbo at Leons Engineering this morning to be machined/fixed.
Hoping to be able to not use a gasket once he is done with it.

Sent from my GT-I9100T using Tapatalk