Can any one enlighten me to roughly the price of a new one and aprox how long it should take to install so that I have a rough idea of what they should be charging me.
Cheers!
Rodders.
Price of A Slave Cylinder
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
Hot Rodders
- Racing Driver
- Posts: 1858
- Joined: Mon Nov 14, 2005 10:35 pm
- Vehicle: NB8A
- Location: Melbourne, again!
- Contact:
Price of A Slave Cylinder
We are getting a new slave cylinder put in by our local Mazda dealer on Friday.
Can any one enlighten me to roughly the price of a new one and aprox how long it should take to install so that I have a rough idea of what they should be charging me.
Cheers!
Rodders.
Can any one enlighten me to roughly the price of a new one and aprox how long it should take to install so that I have a rough idea of what they should be charging me.
Cheers!
Rodders.
-
wun911
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Re: Price of A Slave Cylinder
It takes approx 30 - 40 min to install...
They will need to re fill the clutch master cylinder and bleed it, thats like 7 - 10 dollars and 5 min.
The cost of a clutch slave cylinder on mx5 parts uk is around 30 AUD shipped. The oem genuine mazda one is like 100 AUD.
They will need to re fill the clutch master cylinder and bleed it, thats like 7 - 10 dollars and 5 min.
The cost of a clutch slave cylinder on mx5 parts uk is around 30 AUD shipped. The oem genuine mazda one is like 100 AUD.
every ounce counts
-
de Bounce
- Racing Driver
- Posts: 1091
- Joined: Thu Feb 12, 2009 5:19 pm
- Vehicle: NC
- Location: Northern Burbs - Melbourne
Re: Price of A Slave Cylinder
As a rough guess, with Mazda doing the job, budget for 200 - 300+ and you might come away surprised.
As a guide, Mania list it at just under 200 to supply and fit.
If you are not locked in with Mazda, try a clutch & brake place for a quote.
It's not a hard job nor anything unusual.
Good luck
As a guide, Mania list it at just under 200 to supply and fit.
If you are not locked in with Mazda, try a clutch & brake place for a quote.
It's not a hard job nor anything unusual.
Good luck
-
Hot Rodders
- Racing Driver
- Posts: 1858
- Joined: Mon Nov 14, 2005 10:35 pm
- Vehicle: NB8A
- Location: Melbourne, again!
- Contact:
Re: Price of A Slave Cylinder
Well, I have had the job done at Bendigo Mazda and the total price for part and fitting was under $150.
Gotta be happy with that!
Gotta be happy with that!
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: Bing [Bot] and 5 guests
