Anyone with a mind to throw IRTB's on their car...

[Jeo]

Hey everyone!

I'm sure all of you will enjoy this offer I worked out with Simon @ Jenvey Dynamics.

Many of us wanted a neat IRTB kit but couldn't find anything near plug and play.

Well, Jenvey listened to us and made IRTB manifolds for NA 1.6 & NB 1.8 (NA 1.8 being tested at the moment).

Price is the same for all year Roadsters!



***NOTE THAT THE CARBON FIBER TRUMPHETS COST MORE***

REV9 IRTB Kit (by Jenvey) includes the following:

-Full IRTB Kit & Matching Manifold for your vehicle year
-Fuel Rail
-Linkage Kit
-Linkage Braket & Rod TB Over
-Throttle Position Sensor
-Air Control Valve Kit (4 port)

Retail : $1999.99
Price (1-5 buyers) : $1399.99
Price (6-10+ buyers) : $1249.99 SAVE 38%

We're trying our best to give good deals to our customers and if the exchange rate gets better, we will try even harder!

There are tons of options that can be available, too!

A last picture for your viewing pleasure...

[bruce]

Thanks Jeo!
That looks really nice and it's a good price. Carbon trumpets are no good - you've gotta cover them with a filter or custom manifold.

[slug_dub]

Some available options:

-Carbon fiber airhorns (many sizes available)
-Aluminum airhorns (many sizes available)
-Airhorn grill (from JUBIRIDE)
-Large JENVEY (or REV9) airbox
-Individual airhorn filters
-Megasquirt (need to verify if it's possible)

[Aussie Stig]

f1 cars are 2.4 V8's and they have about 750bhp but thats not important.

want these!!!!

would love to get these put a plenum on them with my supercharger. that would be PIMP!!

If you want it, do it. Go insane.

[Manusdei]

I'm seriously considering picking up a set of these.. have always loved the sound of 8k RPM ITB's screaming.. I know they'd be no good for me right now, but with that saving, I'll leave em in the shed till I'm ready to bolt on a heap of other supporting mods.. Hmmmm

[sailaholic]

Why wait? They are doing even less in your shed than on your car. If you have an ecu, fit them. :-P

You might also want to have a look at the dyno curves on the jenvy site.

Sent from my GT-I9100 using Tapatalk

[Manusdei]

My cars completely stock mechanically wise, and still on original ECU. So I'd wait till i got an aftermarket ECU at the very minimum, which I dont have the cash for atm Also got a whole heap of parts sitting here waiting to be bolted on, so would just be added to the list argh i wish i had more money

[Apu]

If I had $2K burning a hole in my pocket...I'd go for them! Even if just to have them on my table. That's a work of art!

[irwin83r]

AH! dont have 2k on me but ill find some! keen as for a set for a 1.8 with carbon trumpets. have a set of quads gatherin dust at the moment bought ages ago on an impulse that arnt really suited to a nb 1.8.. so i have a set that id be willin to sell cheap that suit (i think) 1.6 and 1.8 NA's

would want to know runner lengths diameters etc etc.. is it setup for a bog stock head and bottom end??

[slug_dub]

Your old set is not suitable for NB8 but ok for NA8? That's a bummer... how come they don't fit?

[sailaholic]

Na6 is different port spacing to na8. Might be best to check what the fit.

Sent from my GT-I9100 using Tapatalk

[Manusdei]

They're now available to suit NA8's. argh, spending too much dam money on this car

[rain902]

yummmm now thats a tempting thought

[sailaholic]

So who is tempted?
I know i am...but i already have the mazda speed ITBS set installed.
Still temping to do a NB head swap and get the kit though....

[Caffeine]

Wow they look nice!

And I'd go a naturally aspirated setup over a turbo any day (otherwise I would have bought BJ's car off him), power is obviously never going to be in the same ballpark, but then the MX5 isn't about power to me...