Boyracer D1-R

manga_blue · Postby **manga_blue** » Thu Jun 16, 2011 4:57 pm

Hellmun wrote:Where's the CAI go down to?

x2

Postby **Boyracer** » Thu Jun 16, 2011 7:08 pm

Won't make it to Lakeside.

The intake goes through the hole in the skirt where the intercooler pipes used to go....plenty of room with no headlight there.

Car is at Mania...Dave plugged in his laptop and did some magic and the car started and runs....sounds really good.

colster3 · Postby **colster3** » Fri Jun 17, 2011 6:49 pm

Ok, so now it's Friday arvo/evening... Don't keep us in too much suspense Boyracer!!!

How did it go?

Postby **Boyracer** » Sat Aug 13, 2011 9:48 am

It's back from Mania and just about ready to go, really nice work by the MX5 mania team sorting out a new exhaust system to hook up to the Maxim works extractors, and tuning the Adaptronic.

Has about 125rwkw, will be on the track in the next few weeks.

Morgan Park 1 hour in Sept.will be the first race meeting then the 1 hour at Phillip Island in November, have a special guest co-driver who owns more MX5s than I do...

After that the engine will be coming out and fitted in to the new NB8B racer.

Postby **Boyracer** » Sat Aug 13, 2011 8:28 pm

Postby **NitroDann** » Sat Aug 13, 2011 8:30 pm

125rwkw is a pretty huge figure, whats the specs on the top end and the comp ratio on it?

Dann

Postby **mx5racing** » Sat Aug 13, 2011 8:58 pm

It's got a SE cam cover. That's gotta be 6 killer wasps in itself.

Postby **NitroDann** » Sat Aug 13, 2011 9:15 pm

One assumes manias dyno, which accounts for 10 odd rwKW. But its still damned impressive.

Dann

Postby **Okibi** » Sat Aug 13, 2011 9:18 pm

SE cam cover :mrgreen:

I heard the standard ones are lighter, I could send you an NB8A one and some cash as a swap. :lol:

tbro · Postby **tbro** » Sun Aug 14, 2011 5:50 pm

Hey Lou,
Looking GOOOOOOOOD.
Hopefully it'll be nearly as quick as the turbo.

See ya at Morgan Park. (but I'll be at the back of the grid)

Terry

Postby **Boyracer** » Tue Aug 16, 2011 10:35 am

Pistons are 11.1 so with head work it will be a bit higher.

I guess dyno figures dont mean that much till you get it on the track.

Dave I like the SE cam cover too much but if I ever sell it I'll let you know.

Terry I'll give you a wave when I'm going past...

evil_weevil · Postby **evil_weevil** » Tue Aug 16, 2011 1:30 pm

looks good and tops result !!

would love to see this in action - and give me a wave when you lap me!

Postby **Boyracer** » Sat Nov 02, 2013 12:12 pm

Has been quite a while since the last update, ran it a year ago at winton, did a 1.36.0 on treads, car was sensational...since then it has sat in the shed, stripped it out, now fitted with NB8C electricals, ABS, stock SVT ENGINE, 5 speed, now set up in enduro mode... Running at Winton 300 next weekend, it's for sale after that meeting.