Few questions

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
slimx
Fast Driver
Posts: 474
Joined: Sun Mar 13, 2011 1:12 pm
Vehicle: NB8B - Turbo
Location: Sydney (Sth West)
Contact:

Few questions

Postby slimx » Thu Jul 28, 2011 7:06 am

Ok i got a Series II NB

Question 1. COWL INTAKE how the F*** to do it with ABS (and the stupid washer bottle)
I want to make my own "cowl-style" intake.. How do i do it??
Whats the best way.
I will be using, stock intake piping to start off, heat shielded pod filter, and then a flexible hose. and .well.. whatever else i need after that.

atm my setup is just stock pipe, air filter, flexible hose that goes below the PASSENGER headlight into that hole where the wheel is.
---
Question 2. Increasing throttle reponse time

Ive owned this mx5 for a while now, after putting an exhaust on and changing the air intake, i realised i did increase the response time a little and it did help me enjoy the car as much as i enjoyed my old HONDA :)

How ELSE would i go about (light mods only) increasing the response time, i did some research before posting and it seems to me that shorter your intake is .. FASTER your throttle response is?

How would i shorten the intake and still get cold air though?
Would it be a good idea to .. put the pod filter AND then run the intake tubing? i dont think it'll fit but im sure you can buy smaller pod filters...?

----------
Question 3. Wheel spin (whilst shifting)

I like it.. so i dont care about opinions my only question is .. what can i do to get BETTER Wheel spin atm i can JUST barely get it 1st - 2nd. Double Clutch can get it.. again.
Other cars, if you accelerate WHILST you depress the clutch shift and let go .. YOUR garunteed wheel spin it seems the mx5 is not.

Most cars that get good wheel spin seem to have a HD clutch, does this help? Or .. am i chasing ..rainbows

magenb
Fast Driver
Posts: 148
Joined: Mon Jun 27, 2011 10:17 am
Vehicle: ND - 2 GT

Re: Few questions

Postby magenb » Thu Jul 28, 2011 9:40 am

slimx wrote:Question 3. Wheel spin (whilst shifting)

I like it.. so i dont care about opinions my only question is .. what can i do to get BETTER Wheel spin atm i can JUST barely get it 1st - 2nd. Double Clutch can get it.. again.
Other cars, if you accelerate WHILST you depress the clutch shift and let go .. YOUR garunteed wheel spin it seems the mx5 is not.


smaller/bad tires or more torque, but both of these will put you into a tree.

User avatar
slimx
Fast Driver
Posts: 474
Joined: Sun Mar 13, 2011 1:12 pm
Vehicle: NB8B - Turbo
Location: Sydney (Sth West)
Contact:

Re: Few questions

Postby slimx » Thu Jul 28, 2011 9:43 am

So u reckon just bald tyres help??

Sent from my GT-I9100T using Tapatalk

User avatar
jerrah
Racing Driver
Posts: 724
Joined: Mon Mar 10, 2008 2:54 am
Vehicle: NA6
Location: Brisbane

Re: Few questions

Postby jerrah » Thu Jul 28, 2011 9:52 am

I have no trouble spinning my tyres launching in 2nd. :P



More power, higher revs, crappier tyres, more/less tyre pressure, less grippy surface. Decrease friction or increase torque.
1991 MX5

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Few questions

Postby NitroDann » Thu Jul 28, 2011 10:04 am

No for throttle response you want maximum volume between the filter and throttle body. Not the other way around. Buy an arc inlet chamber.

Wheelspin, get a drift clutch. And a blower and use plastic tyres.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: Few questions

Postby Jeo » Thu Jul 28, 2011 10:08 am

I normally have a pretty hard time launching at my local hillclimb without spinning the wheels.

User avatar
jerrah
Racing Driver
Posts: 724
Joined: Mon Mar 10, 2008 2:54 am
Vehicle: NA6
Location: Brisbane

Re: Few questions

Postby jerrah » Thu Jul 28, 2011 10:10 am

Jeo wrote:I normally have a pretty hard time launching at my local hillclimb without spinning the wheels.

Hence trying the 2nd gear launch. Got me going with a minimal fuss. But lit the tyres up easily in 2nd on the burnout pad.
1991 MX5

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Few questions

Postby NitroDann » Thu Jul 28, 2011 10:12 am

Not burnouts, he wants to drop it into second and chirp so everyone thinks hes hard.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
jerrah
Racing Driver
Posts: 724
Joined: Mon Mar 10, 2008 2:54 am
Vehicle: NA6
Location: Brisbane

Re: Few questions

Postby jerrah » Thu Jul 28, 2011 10:20 am

Fit a 4.3 or 4.8 open diff?
1991 MX5

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Few questions

Postby NitroDann » Thu Jul 28, 2011 10:35 am

Davex3 wrote: HEY MAN I THINK YOU SHOULD REPLACE THE WHEELS WITH CARBON FIBRE LOLLIES AND THEN HERP DERP THE TURBO HERP.


!?????

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Few questions

Postby Mr Morlock » Thu Jul 28, 2011 2:18 pm

what are we supposed to do - encourage bad behaviour- hooning is hardly something to aspire to.

User avatar
CheyneX5
Racing Driver
Posts: 1776
Joined: Sun May 18, 2008 8:38 pm
Vehicle: NA6
Location: Melbourne, Victoria, Australia
Contact:

Few questions

Postby CheyneX5 » Thu Jul 28, 2011 2:59 pm

Mr Morlock wrote:what are we supposed to do - encourage bad behaviour- hooning is hardly something to aspire to.


Nor is trolling.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Re: Few questions

Postby Benny » Thu Jul 28, 2011 4:00 pm

My car will break into wheelspin at 4,000 RPM when accelerating hard.
Even if I take off easily in first then floor it, when it gets to 4K, the wheels start to spin.
I've had some very surprised and frighteneing looks from passengers when I do this to them for the first time too. :D

Mind you, my car is turboed.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

adrianciaff
Driver
Posts: 46
Joined: Sat Aug 07, 2010 10:46 pm
Vehicle: NA6
Location: Sydney

Re: Few questions

Postby adrianciaff » Wed Aug 03, 2011 1:27 pm

If your looking for better throttle response/ acceleration and would like to be able to produce more wheelspin with the limited power that the mx5 holds naturally... Then I would reccomend a lightwight flywheel + HD clutch upgrade. This is not the cheapest nor the easiest option but from personal experience it will deliver pretty much exactly what you have explained - whether you have bald tires or not wheelspin is easily achieved and the car will accelerate moderately harder up the rev range in the first 3 gears.

On a more simplified note: have you checked the tention on your throttle cable? Lol.


Adrian

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Re: Few questions

Postby Benny » Fri Aug 05, 2011 4:59 pm

Flat changing might also help your problem.

The rev limiter will stop the engine from overrevving.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 22 guests