wheel problemos

[mito]

hey guys,


about to make a order on jdm concept for some wheels, its either going to be work equip 03's (15x8) or work meister s1 2p (16x8)

i want some serious dish without having to get some fender flares. not sure how much more offset i can run with flaring the guards.


cheers for the advice

Jaime

[mito]

oh sorry its an NA

yeah i want to roll the guards. so +30 ?
i was thinking if around 0 or in the negatives would be possible...

[mito]

sweeet as thanks for the help dave.

0 seems like the new offset

[Jeo]

8 +20 would be pushing it, but whatever you're doing, remember that tyres play a vital role in this equation too.

[mito]

so i cant exceed +20 offset?

if im having 15x8 ? =\

[Jeo]

Have you tried measuring? You should be able to figure out most of what you need with your own car and a tape measure.

Alternatively, read this... CR.net

[Steampunk]

As per your thread:
http://mx5cartalk.com/forum/viewtopic.php?f=30&t=47644
you need to do alot more research, all will become pretty straight forward once you know what it's all about.
As a reference point, I have:
- 15x6 wheels with +28 offset,
- 205/50 tyres,
- lowered about 7cm
The above combo required guard rolling on the front, rears are fine.

[mito]

i have been researching and also emailing a wheel customer service agent from jdm concept.

i want to roll the rears.

ive been looking at heaps of images and i cant seem to find the perfect setup.

[mito]

sweeeeet

unfortunately work equip 03's come in either 15x8 +7 or -6 offset =\

im thinking -6 offset..

[mito]

kkz ill take ur advice

[mito]

would it be smarter to get the front 1 inch smaller?

[NitroDann]

It would be smarter to measure your own car for yourself and find out..

Dann

[mito]

Sweet as

Thanks for the help guys