Soft top tension cable spring

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

El Jay
Driver
Posts: 50
Joined: Sat Mar 19, 2011 5:18 pm
Vehicle: NB8A
Location: Redland 'City'

Soft top tension cable spring

Postby El Jay » Sat Jun 18, 2011 5:40 pm

So for a little while now the spring on the drivers side latch has been really slack, which means it doesn't close properly on that side. In an attempt to try and fix it, I've taken a pair of pliers to it but my hack job still doesn't work. So now I'm looking for where I can get one of these; but from doing a bit of research it doesn't seem to be a part I can order from Mazda. I've tried looking at a few parts sites but I can't find it still. Would anyone happen to know where I can order one of these from?

Image

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Soft top tension cable spring

Postby manga_blue » Sat Jun 18, 2011 6:19 pm

I'd say that mx5parts.co.uk is the only easy way. Seeing that you're using their photo of it I guess you already know that. :roll:
’95 NA8

MY91MX
Driver
Posts: 40
Joined: Wed May 11, 2011 5:07 pm

Soft top tension cable spring

Postby MY91MX » Sat Jun 18, 2011 6:50 pm

Mine rusted out and snapped so I went down to the local mitre 10 and got a replacement spring. It works fine.

El Jay
Driver
Posts: 50
Joined: Sat Mar 19, 2011 5:18 pm
Vehicle: NB8A
Location: Redland 'City'

Re: Soft top tension cable spring

Postby El Jay » Sat Jun 18, 2011 7:47 pm

manga_blue wrote:I'd say that mx5parts.co.uk is the only easy way. Seeing that you're using their photo of it I guess you already know that. :roll:


I was just wondering if there was somewhere a little more local, as I want to get it fixed fairly soon.

MY91MX wrote:Mine rusted out and snapped so I went down to the local mitre 10 and got a replacement spring. It works fine.


Alright, I'll try looking in hardware stores. Thanks!

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Soft top tension cable spring

Postby NitroDann » Sat Jun 18, 2011 7:56 pm

Any panel shop will give you one for a beer or whatever, repco whatever, they sell them long like 10cm, without the hooked ends and you cut them to length and just bend the final loop 90 degrees to form the hook.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: Google [Bot] and 40 guests