RE001: Place of manufacture

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

RE001: Place of manufacture

Postby PaulF » Fri Jun 03, 2011 3:50 pm

Hi guys,
I've been searching on the forum and elsewhere for a while with little success. My brother is looking at buying a set of RE001's, but after reading varied opinions on them which seem to mostly revolve around where they were manufactured, we're trying to work out a couple of things:
1. How can you tell the difference? I presume the sidewall is stamped with the place of manufacture; is there any other way?
2. Are there specific sizes that seem to be coming from specific factories? In particular my brother is interested in 195/50/15's. Since some of you folks have probably bought them in this size, can anyone help us out as to where yours were manufactured and if they also come from elsewhere?

Sorry if there is an obvious answer out there somewhere, but I did try to find it. :)

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: RE001: Place of manufacture

Postby Charlie Brown » Fri Jun 03, 2011 3:57 pm

Yes, side wall will tell you where manufactured.
Aussie made one (now, no longer a factory here) were terrible in the wet from personal experience. Jap branded ones were fine.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

User avatar
surok
Driver
Posts: 48
Joined: Thu Jan 06, 2011 9:47 pm
Vehicle: ND - 2
Location: Sydney

Re: RE001: Place of manufacture

Postby surok » Fri Jun 03, 2011 4:02 pm

aussie ones have moved their production to thailand.

oh, and it says it on the sidewall.
SW20 Like a bawwwsss

User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:

Re: RE001: Place of manufacture

Postby Guran » Fri Jun 03, 2011 5:16 pm

surok wrote:aussie ones have moved their production to thailand.

oh, and it says it on the sidewall.

Correction. They are now made in Taiwan not Thailand.

Opinions related to differences in quality depending on country of origin seem to have focussed on susceptibility to chipping of the outer shoulders. My Aussie-made ones chipped badly on the outer shoulders after severe provocation on the track ... two sets did this and my current third set are chip-free (so far).

Experience with wet grip seems to depend on the model you drive and possibly the camber set-up. CB reckons they were aweful/dangerous on his modified NC. I've found they grip fine in the wet on my NA6 with stock suspension.
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: RE001: Place of manufacture

Postby PaulF » Sat Jun 04, 2011 5:25 pm

What size have you been running, Bryan? Does anyone know specifics for 195/50/15? I thought people might have looked at/used this size and be able to tell me where they were made.

User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:

Re: RE001: Place of manufacture

Postby Guran » Sat Jun 04, 2011 8:26 pm

Yeh I use the stock size (naturally) which is 185/60R14. Your tyre dealer will be able to tell you where the 195/50R15 are made. :D
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: RE001: Place of manufacture

Postby manga_blue » Sat Jun 04, 2011 8:52 pm

I've bought 3 sets of 195/50r15 RE001s over the last 3 or 4 years. All made in Japan. The latest set I have was made there in the 42nd week of 2010.
’95 NA8

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: RE001: Place of manufacture

Postby PaulF » Sat Jun 04, 2011 9:27 pm

Thanks guys, that's exactly the info I needed. I'll pass that on. Thanks again. :)

User avatar
Hammer
Speed Racer
Posts: 2849
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NB SP
Location: Sydney
Contact:

Re: RE001: Place of manufacture

Postby Hammer » Sat Jun 04, 2011 10:08 pm

The latest Bridgestone winter catalog shows a new Adrenalin. The Adrenalin RE002. This looks like a replacement for the RE001.

Sadly, the RE002 does not come in 14' like it did with the RE001. There goes my tyre of choice for my NA to use for the track. :(


Image

Image
H@mmer - 1994 Clubman | 2002 SP
Image
GO TOPLESS!!!

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Re: RE001: Place of manufacture

Postby wun911 » Tue Jun 07, 2011 10:20 pm

wait a bit off topic but does anyone know where the new RE002 is made???
every ounce counts


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 328 guests