Muncher's NA8

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
zossy1
Racing Driver
Posts: 1979
Joined: Wed Aug 18, 2010 8:48 am
Vehicle: NA8
Location: Southern Highlands, NSW
Contact:

Re: Muncher's NA8

Postby zossy1 » Thu Jun 02, 2011 11:34 pm

Adelaide... ugh... well, keep it in mind - we may be able to swing something when the time comes... ;)

User avatar
wilch
Fast Driver
Posts: 108
Joined: Wed Aug 02, 2006 9:44 am
Vehicle: NA6 - Supercharged
Location: USA
Contact:

Re: Muncher's NA8

Postby wilch » Fri Jun 03, 2011 7:09 am

I've said it before, but I'll say it again, HOT car! :D

Nice re the speakers :D. Decent for $35 hey! The rain guard helps them seal to the door better too I think, which changes the sound a little.

User avatar
muncher
Learner Driver
Posts: 23
Joined: Tue Mar 29, 2011 3:33 pm
Vehicle: ND - 2
Location: Adelaide

Re: Muncher's NA8

Postby muncher » Wed Jul 06, 2011 7:12 pm

UPDATE - 6/07/2011 - 162,200ks

After the long awaited finish to my degree (pending results :D) I've given my car a bit of attention!

Things I've done in the last two days:

- Changed seats Brides > Stockers (see earlier posts as to why!) ((Don't worry, it won't be forever!)) I'll get some more pics soon!

Image

Such a difference in daily driving, I no longer have to do gymnastics to get in/out and the seat belt isn't cutting off circulation to important body parts any more :mrgreen:

- Oil + Filter + Spark Plugs

Image

Image

Image

Image

Image

Image

I tried some Gulf Western 10w40 semi synth. First time I've used it, seems good so far. No tappet clicking on start up and holding a good pressure (if you can trust the original gauge!) The oil filter was a b**ch to get off! It took a fair while, with swearing and name calling but it finally moved. This would have been so much easier with a oil filter puller, but I'm poor and the nearest supercheap is far away, so hammers, screwdrivers and rubber gloves were deployed! Fun fun!

- Changed upper and lower gear boots and turrent oil

Easy job, didn't run into any problems, turrent oil was a bit tricky to extract as I didn't have a syringe, but I improvised with a sauce bottle and a little medicine sucker thing to get the last bit out, which the bottle couldn't reach! I just replaced the turrent oil with some cheap 80w90 Nulon gear oil.

Image

Image

Image

Image

Image

Image

Image

- Installed my broadway review mirror

Makes a bit of a difference, not heaps more, effective when the roof is off! It's mainly there because it's been laying around home for too long!

I also tried to change over my wheel nuts for some work ones that I bought a few days ago, but I'm having trouble fitting them up. The socket piece I have is too think and doesn't allow any room to get in their, this could be overcome with a smaller piece, but even the lock nut with the lock-nut piece doesn't fit ><.

I think I need some 17mm ones, not 21mm.

Image

So I guess these will be for sale, as well as my brides, I'll make a F/S thread soon!

That's all for now, next step is to sort the diff whine out. I checked the oil and it's all full and clean so that cancels that out. I might take it to a mechanic and get him to drive it, I'm sure he will be a able to quickly identify the problem. p.s. it's an 1.8 open wheeler, so it might be upgrade time :D

Cheers.

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: Muncher's NA8

Postby PaulF » Thu Jul 07, 2011 12:08 am

muncher wrote:Image

That's a bit rude, don't you think? :P

User avatar
muncher
Learner Driver
Posts: 23
Joined: Tue Mar 29, 2011 3:33 pm
Vehicle: ND - 2
Location: Adelaide

Re: Muncher's NA8

Postby muncher » Thu Jul 07, 2011 1:38 am

It's directed to the oil filter, not any one here!! :P

User avatar
muncher
Learner Driver
Posts: 23
Joined: Tue Mar 29, 2011 3:33 pm
Vehicle: ND - 2
Location: Adelaide

Re: Muncher's NA8 - Needs your help!

Postby muncher » Tue Jul 12, 2011 5:17 pm

I need car talks opinion. :D

What would you get first?

Roll bar or a hard top?

I would get a BD roll bar, as there was previously one in this car, looked and felt great!

or

Original hard top or one of lightyears carbon hard tops?

Discuss :

Apu
Speed Racer
Posts: 2399
Joined: Tue Apr 12, 2011 3:04 pm
Vehicle: NB8B
Location: North West, NSW

Re: Muncher's NA8

Postby Apu » Tue Jul 12, 2011 5:26 pm

I'd go roll bar first!

User avatar
wilch
Fast Driver
Posts: 108
Joined: Wed Aug 02, 2006 9:44 am
Vehicle: NA6 - Supercharged
Location: USA
Contact:

Re: Muncher's NA8

Postby wilch » Tue Jul 12, 2011 5:53 pm

Rollbar.

If you buy a hardtop you'll want to get a hardtop stand, and then when you've got the stand, the hardtop will never be on the car again....that's my experience anyway.

Hell, I'm still driving with the top down when it's 8 degree C in the morning! My hardtop is nice and warm in the garage though.

:D

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: Muncher's NA8

Postby PaulF » Tue Jul 12, 2011 7:44 pm

If you can live without the hard top for a while longer, get the rollbar. Safety and chassis stiffness.

I don't know if it means anything to you, but I understand that Lightyear's CF hard tops are illegal for street use. You might be perfectly willing to live with that fact though.

User avatar
muncher
Learner Driver
Posts: 23
Joined: Tue Mar 29, 2011 3:33 pm
Vehicle: ND - 2
Location: Adelaide

Re: Muncher's NA8

Postby muncher » Tue Jul 12, 2011 7:58 pm

Seems like roll-bar is the go!

Wilch: you're a true roadster fanboy now! I love it haha!

PaulF: I was swaying in the direction of the carbon hardtop due to it's lightness obviously, and the cost of a original one seems to be around the mark of lighyears CF tops. In regards to legalities I was planing on keeping my soft top in their and just having the hard-top for winter / added safety, so if ever a officer of the law decided that the CF top was no good, then I could just take it off and put the soft top on! I can't really imagine the CF top being any more dangerous than the soft top though!

I suppose now the challenge is to find a good BD roll bar for a good price!

Thanks for the feedback though guys, appreciated it :D

User avatar
-alex
Racing Driver
Posts: 1492
Joined: Wed Feb 27, 2008 11:38 am
Vehicle: NA8
Location: Old Pac
Contact:

Re: Muncher's NA8

Postby -alex » Tue Jul 12, 2011 8:05 pm

CF Awesomeness > Legalities.!

BD bar is awesome and obviously I went BD bar first.. then I will get some CF goodness on my car hopefully early next year.
Image
Australian Targa Champion|Targa Australia
Sasso - 06/05/10 ♥

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: Muncher's NA8

Postby PaulF » Wed Jul 13, 2011 12:14 pm

-alex wrote:CF Awesomeness > Legalities.!

:mrgreen: I know. Just thought I'd put it out there.

User avatar
muncher
Learner Driver
Posts: 23
Joined: Tue Mar 29, 2011 3:33 pm
Vehicle: ND - 2
Location: Adelaide

Re: Muncher's NA8

Postby muncher » Mon Aug 08, 2011 12:32 am

Just a quick update, I've been in the process of installing a tablet into my car to fit in the double din space.. all going along nicely until the tab broke! So that is in the shop at the moment. When I was playing around with the dash I finally decided to do something about the marks that were on the front plastic.

It was originally like this...
Image

A bit of cheap (harsh) cut and polish, and it turned into this!
Image

On another note, I think I've put my finger on the whine I'm hearing, I think it is rear wheel bearings. With the wheels I'm running it's not a bad idea to replace them regardless so I will be tackling that soon enough, any tips or advice where I can buy bearings from at a decent price?

Other than that.. I'm getting some raybrig lights soon, and I'm on the hunt for a roll bar. I've also had my eye on a 'nakame centre console', but am still deciding if I can justify buying it! (convince me!)

As always I'll keep you posted!


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 16 guests