http://www.ebay.com.au/itm/1990-MAZDA-M ... 761wt_1139
"It runs and drives great but can be unpredictable at times on boost. (runs lean)"
"It needs: ... an ECU capable of mapping boost levels"
Low rent turbo MX5... ouch
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Low rent turbo MX5... ouch
sh*t yeah, megasquirt and 550's and you got a sweet track beast for 5 grand? oh except for brakes cooling diff 5 speed....
etc etc etc
Dann
etc etc etc
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Fast Driver
- Posts: 135
- Joined: Tue May 25, 2010 9:38 pm
- Vehicle: NA6
- Location: St Ives
Re: Low rent turbo MX5... ouch
It's got an LSD
I dont care that my laces aren't fat or that I'm not even close to flush and I certainly don't want to be the illest!
- bootz
- Racing Driver
- Posts: 887
- Joined: Thu Aug 19, 2010 1:13 pm
- Vehicle: NB8B
- Location: The Wild Wild West
Re: Low rent turbo MX5... ouch
Oh come on, all the gear he has added should add up to nearly 4K. So basically you are getting the car for FREE!
i think a half finished turbo for this money is good (subject to vehicle inspection and engineering). 1K for tuning and you will be set.
I don't think he is selling it registered so that might cause problems.
i think a half finished turbo for this money is good (subject to vehicle inspection and engineering). 1K for tuning and you will be set.
I don't think he is selling it registered so that might cause problems.
Bootz and Boof - On the road to somewhere.
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Low rent turbo MX5... ouch
Think eBay... This was done on the cheap. I'm not sure those bits are worth anything like $4k... He didn't even put the fans back in! My guess is his generic eBay FMIC plumbing and turbo outlet piping got in the way...
- Tedsmx5
- Fast Driver
- Posts: 164
- Joined: Mon Jul 14, 2008 10:35 pm
- Vehicle: NA8 - Supercharged
- Location: Newcastle.
Re: Low rent turbo MX5... ouch
It's mostly red that's a plus
Ted
Ted
Why didn't I buy one years ago?
NA8 Ceramic coated headers, Hi flow cat, 2.5”system, M45 SC 150/62.5 8psi, Dual TB, IC & Adaptronic ECU.
NA8 Ceramic coated headers, Hi flow cat, 2.5”system, M45 SC 150/62.5 8psi, Dual TB, IC & Adaptronic ECU.
- jerrah
- Racing Driver
- Posts: 724
- Joined: Mon Mar 10, 2008 2:54 am
- Vehicle: NA6
- Location: Brisbane
Re: Low rent turbo MX5... ouch
Didn't sell.
It has HEAPS of room to put the fans back in from the pictures I can see. It would have taken him 5 minutes to put them in so I'm not sure why he didn't.
Possibly a rising rate fuel regulator on the firewall behind the turbo? Can't have been run long like that it has an unshielded washer bottle in the stock location.
Manifold looks like a tacotaco ebay special, but at least it's not one of those crackandfail 'stainless' jobbies.
It has HEAPS of room to put the fans back in from the pictures I can see. It would have taken him 5 minutes to put them in so I'm not sure why he didn't.
Possibly a rising rate fuel regulator on the firewall behind the turbo? Can't have been run long like that it has an unshielded washer bottle in the stock location.
Manifold looks like a tacotaco ebay special, but at least it's not one of those crackandfail 'stainless' jobbies.
1991 MX5
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Low rent turbo MX5... ouch
jerrah wrote:Didn't sell.
It has HEAPS of room to put the fans back in from the pictures I can see. It would have taken him 5 minutes to put them in so I'm not sure why he didn't.
Possibly a rising rate fuel regulator on the firewall behind the turbo? Can't have been run long like that it has an unshielded washer bottle in the stock location.
Manifold looks like a tacotaco ebay special, but at least it's not one of those crackandfail 'stainless' jobbies.
Might have removed the fan switch sensor to plumb the turbo feed. Who knows - it's a backyard special ;)
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 253 guests